Search
471 articles for “Micro-Electronics.”
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Microstructural Characteristics and Mechanical Properties of the Green Composites Reinforced Bamboo Optimized the Treated Parameters
Abstract: Concrete and steel are traditional building materials with high strength and stress. They are usedeffectively in civil construction, structures of bridges and others. According to the current trend, theconstruction materials have more attention for low density and high durability which produced fromnatural materials; moreover, they are able to be recycled and reused. In this study, the green compositeswere fabricated based on the highly performance epoxy combined with bamboo to get …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 28–38 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Synthesis, Characterization and Deformation Studies of Blast Furnace Slag Particles Reinforced Aa2024 Composite
Abstract: The main objective is to explore the use of blast furnace slag as a reinforcing material. This work provides results of aluminum metal matrix composites reinforced with granulated slag (GS). The Composite is prepared by taking AA 2024 and GS with stir casting process. Optical microscope and scanning electron microscopy were employed to track the reactions between the aluminum matrix and the granulated slag during the sintering treatment. The hardness …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 31–43 Read article
-
Crystallization Kinetics and Morphological Shifts in Polylactic Acid/Nanocellulose Blends Under Isothermal Melt Conditions
Abstract: The great potential of polylactic acid as a sustainable biopolymer for packaging, biomedical materials, and additive manufacturing, polylactic acid's slow crystallization kinetics during melt processing causes it to be poorly crystallized, thermally weak, and mechanically underperforming. Crystallization models of PLA/nanocellulose blends have been limited to isothermal melt crystallization kinetics and the resulting morphological changes. The phenomena discussed in this work are systematically explored by melt compounding of polylactic acid with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Exploring the Dual Functionality of Polypyrrole/Cobalt Sulphide Nanocomposite in Photocatalysis and Gas Sensing
Abstract: Cobalt sulphide nanomaterial was synthesized using the co-precipitation method, and chemical polymerization of polypyrrole (ppy) was performed in the presence of the synthesized cobalt sulphide nanomaterial for the preparation of nanocomposite. The synthesized ppy/cobalt sulphide nanocomposite was characterized by transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray powder diffraction (XRD), Fourier transformation infrared spectroscopy, and UV-visible spectroscopy. The TEM micrograph revealed that the generated cobalt sulphide nanoparticles were …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 72–85 Read article
-
Crosslinked Starch Polymer for Coating on Fruit/Vegetable for Preservation Derived from Waste De-Oiled Soybean Cake
Abstract: Cross-linked starch films have been prepared by reacting starch extracted from de-oiled soybean cake (waste material from oil industry) with bio-based acids citric acid and tartaric acid. The obtained films were characterized by spectroscopic, thermal and surface morphological techniques. Thermal analysis showed that thin film has good thermal stability. The micrographs obtained from scanning electron microscopy showed the film surface has smooth and uniform morphology. Biological properties like cytocompatibility, antimicrobial …
Published in Journal of Catalyst & Catalysis Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Material-Level Degradation of Magnetorheological Fluids Under Long-Term Cyclic Shear
Abstract: The long-term functional stability of magnetorheological fluids (MRF) remains a key limitation for their reliable use in adaptive systems and continuously operated magnetorheological devices. In this study, the intrinsic evolution of rheological properties in a commercial MRF (MRC-C1L) is systematically examined under prolonged cyclic loading, with the aim of isolating material-level degradation mechanisms independent of device-related effects. The fluid was subjected to 120,000 low-strain oscillatory shear cycles under a constant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 101–112 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Crosslinked Starch Polymer for Coating on Fruit/Vegetable for Preservation Derived from Waste De-Oiled Soybean Cake
Abstract: Cross-linked starch films have been prepared by reacting starch extracted from de-oiled soybean cake (waste material from oil industry) with bio-based acids citric acid and tartaric acid. The obtained films were characterized by spectroscopic, thermal and surface morphological techniques. Thermal analysis showed that thin film has good thermal stability. The micrographs obtained from scanning electron microscopy showed the film surface has smooth and uniform morphology. Biological properties like cytocompatibility, antimicrobial …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 17–29 Read article
-
Application of Polypyrrole/Lead Sulphide Nanocomposite in UV Light Assisted Photocatalysis and Gas Sensing
Abstract: The synthesis of ppy/lead sulphide nanocomposite was done using the co-precipitation method. The synthesized ppy/leadsulphide nanocomposite was characterized using Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Powder Defraction (XRD), Fourier Transformation Infra-Red Spectroscopy (FTIR), UV-Vis Spectroscopy techniques. The optical bandgap of the synthesized ppy/lead sulphide nanocomposite was observed to be 3.48 eV. The synthesized material is crystalline, with an average crystallite size of 2.51 nm. The photocatalytic …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 13–27 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Development and Comparative Study of Aluminium- Copper Metal Based Composite Through Different Routes
Abstract: The aim of this study is to develop aluminium-copper composite through powder metallurgy technique. Powder metallurgy is an art or technology which can produce exact dimension of final roducts utilizing less energy. Copper oxide (CuO) was used as the source of copper, which was extracted through a reduction process using dextrose. The reaction was thoroughly examined and reported. Commercially available aluminium powder served as source of the aluminium. Aluminium- copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 19–32 Read article
-
Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences
Abstract: Biopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The main goal of this study is to come up with new ways to make composites and then fully characterize their material properties so that they can be used in more advanced ways. During the production step, a new method is used that combines green chemistry ideas with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–136 Read article
-
Optimization of Process Parameters for AISI 304 Using Micro-EDM Drilling Process: A Review
Abstract: Today, a variety of microparts are needed to fabricate high-tech items including MEMS applications and micro-electronic parts. The advancement of micromachining technology becomes ever more important in order to produce these micro parts. The creation of accurate holes and pins is one of themultiple processes in the micromachining process that is necessary for many small components. In order to create deeper, more straight holes, micro-hole drilling is utilized in a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 26–37 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Performance Evaluation of Green Walnut Husk Waste Extract for Inhibiting Aluminium 8088 Corrosion in Acidic Solution
Abstract: The cumulative call for environmental and supportable corrosion inhibitors has obsessed curiosity in exploiting plant-based agronomic surplus resources. Presented research work discovers the corrosion inhibition probable of green walnut husk extract(GWH)—a normal and plentiful agro-waste—on Aluminium 8088 alloy in an acidic medium. Aluminium 8088, however identified for its corrosion resistance, is vulnerable to squalor in highly acidic settings, affectation trials in several industrial claims. GWH extract act as an ecologically …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 45–59 Read article