Search
105 articles for “About Glass Fiber”
-
Electromagnetic and Dielectric Performance of Polymer–Ceramic Composite Substrates for Fractal-Based IoT-Antenna Fabrication
Abstract: Polymer–ceramic composite substrates play a crucial role in determining the electromagnetic performance, mechanical stability, and thermal reliability of radio-frequency devices. In this work, a polymer-based composite substrate is systematically investigated for its suitability in compact IoT and RFID antenna applications. A fractal-structured antenna is employed as a functional test platform to evaluate the dielectric behavior, impedance characteristics, and radiation efficiency of the composite substrate. Novelty of the proposed reader antenna …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1518–1534 Read article
-
Intelligent Optimization of Drilling Parameters in Polymer Composites using Machine Learning and Metaheuristic Techniques
Abstract: The study tests different ways to use ML and metaheuristic algorithms to determine the best drilling parameters for polymer matrix composites. The research uses a composite matrix made from 55.25% vinyl ester, 44.0% Nickel–Phosphorous coated glass fiber and 0.75% Al₂O₃ nanowires which are tested for tensile strength (64.57 MPa), flexural strength (85.86 MPa) and impact strength (71.79 kJ/m²). By applying a Taguchi orthogonal array, it is observed that a slower …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1795–1810 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Comparative Environmental and Economic Assessment of Wind Turbine Blade Materials
Abstract: Wind energy has proven to be one of the most stable and non-polluting renewable energy sources to mass power production. For energy production wind turbine is an essential part of the wind power plant. The choice of the blade material and coating applied on it has a strong impact on aerodynamic performance, mechanical strength, fatigue life, manufacturing possibility, and environmental effects throughout the operating life of the turbine. Hence, authors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 91–99 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Thermo–Electrical Performance Enhancement of a Lightweight Polymer–Metal Hybrid Electrostatic Precipitator Using Epoxy-Based Composite Housing for Industrial Particulate Control
Abstract: Airborne particulate emissions, particularly PM₁₀ and PM₂.₅ produced by industrial activities and combustion processes, they continue to pose a significant threat to both the environment and public health. Electrostatic precipitators (ESPs) are widely recognized for their ability to achieve high collection efficiencies; however, conventional metallic constructions often lead to increased system weight, higher fabrication costs, and long-term corrosion-related challenges. In this study, a lightweight hybrid material approach is proposed by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 652–668 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Influence of Hybrid Fiber Reinforcement on the Interfacial Bonding and Fracture Toughness of Epoxy-Based Polymer Composites Under Cyclic Loading
Abstract: This study investigates the influence of hybrid fiber reinforcement on the interfacial bonding and fracture toughness of epoxy-based polymer composites under cyclic loading. Carbon, glass, and aramid fibers, both individually and in hybrid combinations, were incorporated into the epoxy matrix to evaluate their thermal, mechanical, and fatigue-resistant properties. Thermal characterization revealed distinct material behaviors, with carbon fibers exhibiting superior thermal conductivity, while glass and aramid fibers provided enhanced thermal stability. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 799–824 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Structures and sensors of Polymer Optical Fibers for Last Mile Networks
Abstract: Originating from distinct concepts for transferring information, sensing, or lighting efficiency, fiber characteristics vary greatly throughout their range. A substantial bandwidth-length product with acceptable attenuation characteristics is required for effective transfer of information. Since sensor fibers are typically used over short distances having considerably lower attenuation prerequisites. This paper presents polymer optical fiber (POFs) structures that are used as sensors over conventional fiber optics.An even broader spectrum of optical characteristics …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 166–172 Read article
-
Critical Review on Basalt Fibre as Reinforcement in Different Applications
Abstract: Basalt fiber (BF), derived from volcanic rocks, has emerged as an attractive reinforcement material due to its remarkable properties, including high strength, stiffness, thermal stability, and eco-friendliness. This review critically examines the applications of BF as reinforcement in various fields, such as civil engineering, aerospace, automotive, and biomedical sectors. The performance of BF-reinforced composites in terms of mechanical, thermal, electrical, and biological properties is evaluated. The challenges and opportunities associated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 670–685 Read article
-
Dynamic Response Analysis of Isotropic and Orthotropic Rectangular Plates under Clamped-Free Conditions
Abstract: This study explores Theoretical and numerical tools of determining the free vibration properties of isotropic and fiber-reinforced composite rectangular plates. The effect of anisotropy of materials on the dynamic response of the plates is compared between the Aluminium plates and the glass-epoxy laminates. The model used in the study is a three-dimensional finite element model that is designed using a combination of SolidWorks and ANSYS workflow. Clamped-free boundary conditions are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 258–274 Read article
-
Biquid Filter Based Equalization Through Plastic Optical Fiber
Abstract: Plastic Optical Fiber (POF) is increasingly recognized for its advantages in high-speed data transmission, particularly over short distances. Unlike traditional glass optical fiber, POF uses a polymethyl methacrylate (PMMA) core with a fluorinated polymer cladding, resulting in a larger core diameter that simplifies alignment and splicing. Recent advancements include the development of graded-index POF (GI-POF), where the core's refractive index gradually decreases from the center outward, minimizing modal dispersion and …
Published in Journal of Microelectronics and Solid State Devices · Vol. 11, Issue 2, 2024 Read article
-
Use of Geopolymer Composites for Controlling Structural Cracks
Abstract: A building’s safety and stability can be compromised by ignoring the potential structural issues indicated by occurring cracks in buildings. Extensive damage may cause over the period from unidentified cracks.Good quality concrete never cracks in normal service conditions unless high horizontal force is applied. Through the cracks, carbon dioxide is released into the concrete and speeds up carbonation throughout the cracks, thus reducing the structure usage. The materials which are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 172–184 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article