Search
1964 articles for “5” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
A Microcontroller based Electrical Appliances Control Using Bluetooth and Android Device
Abstract: AbstractThe smart phones have penetrated so deep into the lives of an individual that they have become an indispensible component in one’s life. Instead of designing another gadget for control of home appliances, the hand held smart phone of every individual can be made as a controlling device and this also makes a sense. In this paper, a home automation system for control of appliances is presented using android based …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 5–10 Read article
-
A Review on Water Level Monitoring System
Abstract: AbstractWater stored up beneath the Earth’s surface is called the groundwater. It is present in soil pore spaces and in the fractures of rock formations. Groundwater constitutes of soil moisture, permafrost, immobile water, and deep geothermal or oil formation water. Groundwater forms the most important water source in countries like India. About 85% of drinking water in India is from groundwater and 51% of the total population in the United …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 16–18 Read article
-
Design and analysis of PV based Micro-inverter using INC MPPT controller and Fuzzy Logic controller
Abstract: The reserve of conventional energy sources such as coal, natural gas, and crude oil are rapidly decreasing with increasing demand of electricity in the world.Also the fossil fuels cause air pollution, global warming and similar environmental problems. Therefore, recent studies have become widespread about renewable energy sources (RESs) such as biomass,hydropower, geothermal, wind and solar which are the most popular worldwide. Among other RESs, solar energy is assumed as the …
Published in Journal of Microcontroller Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 6–18 Read article
-
Microstrip Patch Antenna for Dual Band Application
Abstract: AbstractThis paper presents a rectenna that is designed and simulated to power the wireless sensor systems at 3.12 GHz. The antenna substrate is designed with glass epoxy. The rectenna circuit has been simulated on the glass epoxy and RF-to-DC conversation is investigated for power level –5 dBm. The presented antenna has the impedance bandwidth of 58.34%, i.e. from 2.61 to 4.76 GHz with a gain of 2.67 dBi.Keywords: Rectenna, RF-to-DC, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 25–28 Read article
-
Two Parabolic Shape Microstrip Patch Antenna for Single Band Application
Abstract: AbstractIn this article, a two parabolic shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable, Jeans substrate is used. The return loss of Two Parabolic shaped patch antenna is –43 dB at 7.618 GHz resonant frequency. It covers the bandwidth from 5.386 to 8.971 GHz. In this paper, simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 33–36 Read article
-
A Review on Chiral Metamaterials and its Applications in Antennas
Abstract: AbstractThis paper presents a review of the chiral metamaterials (CMM) and their different specific properties like circular dichroism, negative refractive index, and giant optical activity. The physical properties of metàmaterials circular dichroism and the method of retrieval of effective parameters of the CMM are discussed in detail. The various classes of the chiral metamaterial and their results of the simulation are presented. The study shows that the chiral metamaterials have …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 5–16 Read article
-
Ultra-Wideband (UWB) Planar Monopole Antenna Array for Indoor Multimedia Devices
Abstract: AbstractA UWB planar monopole antenna array for indoor multimedia devices is presented. The base work of antenna includes a modified rectangular monopole to cover entire UWB (3.1 to 10.6GHz) and fed with a 50Ω microstrip line. The proposed antenna array is having a compact size of (80*30*1.6mm3) with a spacing of 0.5*lambda between two elements. To exhibit a wider bandwidth, a rectangular cut in the ground plane has been introduced …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 28–35 Read article
-
Dual-Band Printed Compact Trident Shaped Monopole Antenna with Inverted L-shaped For Wireless Communication
Abstract: Abstract: In the present work, printed compact trident shaped antenna with inverted L-shaped strip for dual band wireless communication. Structure of antenna is simple, and the size is 34×18 mm2. This modified inverted L-shape will give the required bandwidth with good return loss. The simulated results show the dual band from (2.5–3.2 GHz) and (5.07–5.80 GHz) with the center operating frequency at around 2.9 GHz and 5.48 GHz having reflection …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 13–17 Read article
-
Design and Fabrication of Patch Antenna using DGS for WLAN and WIMAX Applications
Abstract: AbstractIn this paper a small size micro strip patch antenna with dual frequency characteristics is presented. The proposed antenna is designed on an FR-4 epoxy dielectric substrate with the thickness of 1.6 mm and dielectric constant er =4.3. The proposed antenna has used defected ground structure (DGS) stop theory to create dual frequency band characteristics 2.13GHz – 3.25 GHZ for WIMAX and 5.725GHz – 6.3084 Hz for WLAN, respectively. The …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 5–16 Read article
-
An Overview of Elliptical Low Pass Filter by using Defected Ground Structure Method
Abstract: Calculation and differentiation of the response of elliptical low pass filter (LPF) with and without using defected ground structure (DGS) was done. In the present work, return loss, bandwidth and gain have been evaluated. All the designs are printed on the FR4 lossy substrate of dielectric constant ( ) of 4.3, substrate thickness of 1.6 mm and loss tangent of 0.02. Moreover, the effect of controlling parameters namely slots and …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 2, 2017 · pp. 13–16 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
Design and analysis of PV based Micro-inverter using INC MPPT controller and Fuzzy Logic controller
Abstract: The reserve of conventional energy sources such as coal, natural gas, and crude oil are rapidly decreasing with increasing demand of electricity in the world.Also the fossil fuels cause air pollution, global warming and similar environmental problems. Therefore, recent studies have become widespread about renewable energy sources (RESs) such as biomass,hydropower, geothermal, wind and solar which are the most popular worldwide. Among other RESs, solar energy is assumed as the …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 16–29 Read article
-
Split Ring Resonator Based Dual Frequency Microstrip Patch Antenna For Wireless Applications
Abstract: The objective of the work is to design a compact dual frequency microstrip antenna (MSA) at GSM 1800 MHz and ISM (2.4 GHz). The proposed MSA incorporates a rectangular patch with an inverted U slot printed on the top of RT duroid 5880 substrate with thickness of 0.8mm and dielectric constant of 2.2. The dimensions of the patch are optimized as 45x 54 mm2. It is fed by coaxial feeding. …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 1–14 Read article
-
A Compact CPW-fed Quadruple-band-notched Antenna with Concentric Annular-rings for UWB Applications
Abstract: In this paper, a compact coplanar waveguide (CPW)-fed quadruple-band-notched antenna with concentric annular-rings for ultra-wideband (UWB) applications is presented. The proposed antenna consists of four concentric annular-ring resonators, a circular shape radiating element and a CPW feed line. The quadruple band rejection is easily achieved by controlling the widths and radii of four concentric annular-ring resonators. Through the exception of four stop-bands at 3.29 to 3.7 GHz, 5.07 to 5.92 …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 38–47 Read article
-
A Quad-Element UWB-MIMO Triangular Monopole Antenna with Triple Band -Notch and High Isolation
Abstract: A quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation is proposed in this paper. The presented antenna consists of four triangular -shaped antenna elements, which are arranged in orthogonal orientation. This antenna is printed on low-cost FR-4 substrate with dielectric constant of 4.4 and its overall size is 50 × 50 × 1.6 mm3. Its operating frequency band is 2.97~11GHz. High isolation of 22dB between four …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 30–37 Read article
-
Design and Implementation of UWB-MIMO Triangular Antenna with Notch Technology
Abstract: The paper proposes a quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation. The antenna comprises four triangular-shaped elements arranged orthogonally, printed on a low-cost FR-4 substrate with a dielectric constant of 4.4. Its dimensions are 50 × 50 × 1.6 mm³, and it operates within the frequency band of 2.97 to 11 GHz. To achieve high isolation of 22 dB between the four radiatingelements, a square …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 8–15 Read article
-
Study of Mechanical and Tribological Properties of CSAp Reinforced LM25 MMC
Abstract: Aluminum Matrix Composites (AMCs) allude to the sort of light weight elite aluminum driven material matrix. AMCs comprise of a non-metallic reinforcement which included into aluminum grid which offers worthwhile properties over base material. Reinforcements like Sic, CSAp, B4C, Al2O3, TiC, TiB2, TiO2 are typically liked to enhance the mechanical properties. Here aluminum LM25 is chosen as framework material, while coconut shell powder is chosen as support (reinforcement) material. Coconut …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 2, 2018 · pp. 28–32 Read article
-
Corrosion behavior of Friction stir welded aluminum alloys: A review
Abstract: A review on corrosion behavior of Friction Stir Welded aluminum alloys has been presented. Objective of the work is to discuss the behavior of Friction Stir Welded aluminum alloys under chloride environment. The variation of corrosion potential and corrosion rate for the welded portion and base metal and within the welded region for various zones like weld nugget, HAZ and TMAZ has been studied. Alloys of series 2XXX, 5XXX, 6XXX …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 20–26 Read article
-
Optical Properties of Barium Borate (BaB2O4)Compound for Current Optoelectronic Applications
Abstract: In this work,Barium borate was prepared by sol-gel synthesisdepending on different molar (0.1, 0.2, 0.3 0.4 and 0.5) molar. Barium borate is an inorganic compound, and it was useda borate of barium with a chemical formula BaB2O4 or Ba(BO2)2 It is available as hydrate or dehydrated form, as white powder or colorless crystals. The optical characteristics of the prepared samples have been investigated by UV/Vis spectrophotometer in the wavelength range …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 49–58 Read article
-
Synthesis and Characterization of Green Synthesized Iron Nano Particle (GInP) Using Eucalyptus globulus for Lead Removal
Abstract: The application of green synthesized iron nanoparticle for the removal of lead is researched in this study. The FT-IR and XRD results reveal that a nanoparticle with 80 nm size could be synthesized using Eucalyptus globulus leaf extract. The specific surface area of the nanoparticle was found to be 59 m2/g. The lead removal capability of the green synthesized iron nanoparticle (GInP) was investigated for lead concentration ranging from 50–250 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 20–25 Read article