Search
1356 articles for “Respectful”
-
Prototype of Design, Analysis and Optimization of Front Hub Upright Assembly of ATV (All-Terrain Vehicle) for Baja SAE India Competition
Abstract: When all-terrain vehicle came in dynamic condition steering and suspension geometry, it affected the vehicle stability. This stability limits the speed and comfort of the vehicle. Stability is more required in all-terrain vehicles because they have to wear more dynamic force; if vehicle will be unstable then failure will occur; it also decreases the ergonomics and comfort of the driver, so it is mandatory that vehicle should have proper geometry …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 15–20 Read article
-
Design and Construction of a Thermosiphonic Solar Photovoltaic – Thermal Water Heating System for Sustainable Development in Temperate Regions of Africa
Abstract: AbstractThe atmospheric temperature of some temperate regions of Africa is mostly about 30–45°C, it incites 30–80°C heat over the panel since black body of the PV panel observes more heat, and this temperature affects the electrical efficiency of the panel. The importance of energy availability in the economic growth, social and political development for every nation cannot be overemphasized. Affordable and reliable energy availability is the precondition for sustainable development. …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 3, 2017 · pp. 1–8 Read article
-
Analytical Design of 1 kW Capacity Lithium Bromide/Water Absorption Refrigeration System
Abstract: AbstractIn current era, the energy scarcity is the key concern. In this context, new alternative environment-friendly energy resources have to be explored. The researchers are focusing more on effective and efficient use of energy. The difference in demand and production of energy opens a new arena of heat recovery systems. Vapour absorption refrigeration systems (VARS) are one of the prominent heat recovery systems powered by heat, and can be powered …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 3, 2017 · pp. 36–49 Read article
-
Design and Construction of Solar Still-Solar Water Heater Hybrid for Small Scale Application
Abstract: AbstractSolar still-solar water heater hybrid for small scale application has been designed and constructed and tested in this study. The construction began with designing and developing isolated units of single-slope solar still, solar water heater and water storage tank separately. These were then coupled together to form the hybrid system. To test its efficacy, the hybrid was subjected to perform distillation alongside a conventional type single-slope solar still of the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 2, 2017 · pp. 11–16 Read article
-
An Experimental Study on Design and Fabrication of Sheet and Tube Type PVT Collector
Abstract: AbstractA hybrid system composed of a photovoltaic (PV) module integrated with a thermal unit is fabricated and tested in outdoor conditions. The system has been installed at MITS, Gwalior and its thermal analysis has been done experimentally. In our experimental work, water is used as a working fluid and pit coarse sand is used as an insulator. Experimentally it is observed that the thermal efficiency of the system is also …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 33–38 Read article
-
Liability of Photovoltaic-Thermoelectric Hybrid Devices
Abstract: Photovoltaic (PV) modules suffer from the exalted temperature in case of outdoor performance. The losses are about more than 25% depending on the arrangement of the materials on the top. If thermoelectric (TE) converter is integrated with the PV modules, then we can form PV-TE hybrid module where TE converter can produce additional electricity due to the difference of the temperature. Nowadays, it is possible to enhance the efficiency by …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 1, 2017 · pp. 12–17 Read article
-
Vertical Axis Wind Turbine Modeling and its Analysis Using ANSYS
Abstract: Research on small wind turbine (SWT) is on the upswing in the last five years, as there is a need of energy producing machines to compensate with the fossil fuel based energy. The green technology wishes to create environment friendly energy producing devices based on wind or solar technology. In this paper, an attempt is made to make use of already existing waste wind energy produced by high speed moving …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 1, 2017 · pp. 26–32 Read article
-
Experimental Investigation on the Production and Usage of UCVO and WSLO as an Alternative Fuels to Diesel Engines
Abstract: Recently, black/biodiesels are gaining wider popularity as they can be made from renewable resources and wastages, thus, providing an extra environmental values. Indeed, reuse of the waste spent lubrication oil (WSLO) and used vegetable cooking oils (UVCO) has attracted researchers as the wastes generated are on a massive level everywhere and are posing an environmental hazard in handling serious problems of waste management. The transesterification process and centrifuge operations are …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 2, 2016 · pp. 34–44 Read article
-
Parametric Study of Parabolic Trough Solar Collector System: A Review
Abstract: The detailed thermal analysis of a parabolic trough collector (PTC) was carried out to predict the thermal performance. The analysis is based on the established theory of PTC—the radiation absorption, heat loss from the collector, and temperature distribution on the plate. An analytical program, suitable for use on a digital computer is developed for the purpose of studying the hourly behavior of a solar collector. The exergy output is optimized …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 1, 2015 · pp. 46–50 Read article
-
Application of Nanofluids in Solar Energy
Abstract: Nanofluids are skillfully prepared colloidal suspensions of nanoparticles (which is of size 1–100 nm) in a base fluid; is a relatively new field, which is not more than two decades old. The main idea of this paper is to know about the applications of nanofluids in solar thermal engineering system. The shortage of conventional sources and environmental problems motivated the researchers to use non-conventional energy sources such as solar energy …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 2, 2015 · pp. 1–11 Read article
-
Study of Performance of Photoelectrochemical Cell for Solar Energy Conversion and Storage in Carbol Fuchsin-CTAB-EDTA System
Abstract: Power storage capacity is becoming more necessary as wind and solar power sources rapidly enter the commercial market. The Photoelectrochemical Cell as they are described in the current manuscript are promising energy technologies since they allow for the generation and storage of solar energy. In addition to the requirement for power storage, photoelectrochemical Cell (PEC) are particularly important because these solar devices can produce and store solar power simultaneously. Photoelectrochemical …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 47–55 Read article
-
Preparation and Characterization of Activated Carbon from Bamboo by Chemical Activation
Abstract: In this study, an attempt was made to prepare an activated carbon (AC) from bamboo by chemical activation method. Phosphoric acid (H3PO4) was used as a chemical activation agent for the production of AC from bamboo under conditions of temperature 600 °C for 1 h. The AC is an excellent adsorbent and its applications are widely described in literatures. Prepared ACs, are characterized by standard methods XRD, SEM, FTIR, XRF. …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 1–6 Read article
-
Mechanistic and Catalytic Behavior of Os(VIII) for the Chlorpheniramine Maleate and Bromamine-B Redox System: A Kinetics Based Approach
Abstract: Chlorpheniramine maleate (CPM) is an important antihistamine agent. To the best of our knowledge there is no report in the literature about the oxidation of CPM with halogen + 1 oxidant from the stand point of its kinetics and mechanistic chemistry. Hence, a systematic kinetics and mechanistic study on the oxidation of CPM with bromamine-B (BAB) in the presence of NaOH and Os(VIII) catalyst has been carried out at 303 …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 18–31 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
Synthesis of Copper Oxide Nanoparticles using Ultrasound for the Treatment of Textile Organic Dyes (Reactive Black 5 and Basic Blue 3)
Abstract: This paper describes the ultrasound assisted synthesis of copper oxide (CuO) nanoparticles using copper nitrate trihydrate and ammonium carbonate as reactants. The resultant product, copper carbonate was calcined at 400°C which was chosen based on the thermogravimetric analysis of copper carbonate precipitate. The final product CuO nanoparticles characterized by X-Ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX), particle size analyzer (PSA) and Brunner-Emmet-Teller surface area analyzer (BET) …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 16–22 Read article
-
An Insight into the Production of Bioethanol from the Duckweed
Abstract: The ultimate goal of this study was provided an insight into the production of bioethanol from the duckweed. In this study three experimental parameters for maximizing bioethanol yield were investigated during the dilute acid hydrolysis; acid concentration (0.6-1M), temperature (80-120oC) and time (60-180minutes). The conversion of duckweed to bioethanol can be achieved mainly by four process step; the first step was pretreatment of duckweed to remove different contaminates, dried at …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 48–56 Read article
-
Implications from Iridium—Compose in Versatility
Abstract: Iridium (Ir) is a platinum group of metals suggested to be used in electronic component manufacturing to substitute gold for catalysts, alloy elements and increasing problems. Ir is a high melting metal to avoid corrosion, so rendering is called green as stipulated. Iridium artificial photosynthesis and electron generation capabilities have suggestive problems in supplementing the respective food value after chlorophyll composition and enhancing electricity from supplemented electricity through wind tunnels. …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 1–7 Read article
-
Sonochemical Methods to Prepare Composes
Abstract: This purview is to link major and minor chemical reactions. Subjective has various unknown chemical reactivity those have announced by ultrasound. Cavity generation followed by implosive collapse have secreted chemistry to some extent so as pervert to scheme as well. Applicability of ultrasound has studied over chemical stimulus, scrubbing atomizer, crystallization, emulsification, dissolution, dispersion, defoaming, degassing, floatation, homogenization etc. Synthetic catalytic routes has subscriptive issued ultrasonic reverberation to regain some …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 1–7 Read article
-
Performance Evaluation of H 2 SO 4 -Rice Husk-Moss Adsorbent for the Removal of Zn (II) Ion from the Effluent of Science Equipment Development Institute (SEDI)
Abstract: This research was carried out to investigate the potential of green algae (moss) with the support of H 2 SO 4 treated rice husk activated carbon using batch adsorption process for the removal of Zn (II) ions from SEDI industrial effluent. The rice husk- moss algae was activated using H 2 SO 4 . The effluent was characterized using atomic absorption spectrophotometer with initial concentration values of 12.3 mg/l for …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Effective Removal of Widely Applicable Pesticides Using Iron Pillared Clay (Fe/Bt): Adsorption Behaviour and Kinetics
Abstract: The vast application of pesticides for agricultural purpose to enhance adequate plant growth is quite alarming, with its negative environmental influence increasing every day. The current study investigates the potential of iron pillared bentonite (Fe/Bt) for effective removal of three different widely applicable pesticides (Glyphosate, Bentazon and Diazinon) in aqueous solution. This adsorbent has been characterized ab initio by FT-IR spectroscopy. Adsorption parameters such as contact time, initial pesticide concentration …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 1, 2023 · pp. 10–20 Read article