Search
1192 articles for “MnCl2.4H2O salt reinforcement”
Nothing matched all of your words, so these match any of them.
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Adaptive Machine Learning Framework for Navigation Control of Autonomous Drones
Abstract: The rise of autonomous drones has expanded UAV applications across sectors like surveillance, delivery, agriculture, and rescue operations. However, traditional navigation systems face limitations in adapting to dynamic environments. This study proposes an AI-driven adaptive navigation framework that leverages real-time sensor data, reinforcement learning, and adaptive control strategies to enhance drone autonomy, scalability, and security. The system processes mission inputs, environmental data (from LiDAR, cameras, GPS, and weather sensors), and …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 3, 2025 · pp. 1–7 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Synthesis and Ion Transport Studies of a New Potassium Ion-Conducting Nanocomposite Polymer Electrolyte
Abstract: The pursuit of safe, efficient, and sustainable energy storage solutions has intensified research on nanocomposite polymer electrolytes, especially for next-generation battery technologies. This work reports the synthesis and ion transport characteristics of potassium ion-conducting nanocomposite polymer electrolytes (NCPEs), emphasizing their structural, electrical, and electrochemical performance. To enhance ionic conductivity and mechanical strength, polymer matrices were reinforced with nanoscale ceramic fillers. A new potassium ion-conducting NCPEs: (1-x)[70PEO:30KCl] + x SiO₂ (where …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1496–1504 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
AI-Based Intelligent Traffic Signal Management System: A Review
Abstract: Traffic congestion is a growing problem in urban areas worldwide, leading to economic losses, increased pollution, and commuter frustration. Traditional traffic management systems rely on fixed timing cycles and lack adaptability to real-time traffic conditions. Intelligent traffic light control systems based on artificial intelligence (AI) have become a viable substitute for traditional techniques. These systems are able to evaluate large volumes of traffic data in real time, identify patterns, and …
Published in International Journal of Electronics Automation · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Digital Twin-Driven Optimization of Dynamic Covalent Polymer Networks under Real-Time IoT Monitoring
Abstract: The dynamic covalent polymer networks (DCPNs) has the highest allurement because of the reversibility of all of the chemicals and repetitive. The process of convalescence is delayed, the sense of source betrayal and acting relations is too strong. This transport to our material situation is an ever-refrigerated digital twin in this painting which was developed through repetition produced by constant synchronism sensors of the IoT that is constantly refined by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 137–157 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Greener 3D Printing: The Role of Artificial Intelligence in Sustainable Polymer and Composite Manufacturing
Abstract: The integration of sustainable materials with additive manufacturing (AM) technologies marks a significant step towards environmentally responsible production. Biodegradable polymers, recycled thermoplastics, and bio-based composites, when used in 3D printing, offer the potential to reduce the ecological footprint of manufacturing. However optimizing the interplay between material properties process parameters, and product performance remains a complex challenge. This review examines how artificial intelligence (AI) is being applied to address these challenges …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 288–300 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Comprehensive Review of Composite Materials: Classification, Manufacturing Methods, Mechanical Behavior, Failure Modes, and Emerging Applications
Abstract: Composite materials have emerged as one of the most significant classes of engineered materials due to their ability to deliver high strength to weight ratios, enhanced durability, and tailored multifunctionality. Over the past two decades, rapid progress in polymer chemistry, advanced reinforcement architectures, additive manufacturing, and automated fabrication has expanded the applicability of composites across aerospace, automotive, biomedical, civil, and renewable energy sectors. This paper provides a comprehensive review of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 923–939 Read article