Search
174 articles for “stiffness”
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
AI-Driven Inverse Design of Functionally Graded Bio-Nanocomposites for Sustainable High-Barrier Packaging
Abstract: Multilayer plastic packaging realizes high barrier performance through laminated heterogeneous structures, but the heterogeneous structure has severe end-of-life challenges caused by the interfacial incompatibility of materials and the poor recyclability. This study proposes the inverse design of functionally graded PLA-nanoclay composite films by reinforcement learning as a monolithic alternative to traditional multilayer systems. Twin-screw extrusion is designed as a continuous control Markov decision process, and proximal policy optimization (PPO) is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1547–1564 Read article
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
Performance-Based Wind Response Analysis of Tall RCC Iregular Structures Using Autodesk Revit and Robot Structural Analysis
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Solid Acid Catalysts for the Selective Conversion of Biomass to Levulinic Acid
Abstract: Levulinic acid (LA) has emerged as a versatile platform chemical with significant potential for producing renewable fuels like gamma-valerolactone (GVL), biodegradable polymers, and fine chemicals from biomass (both terrestrial and marine which ae rich in carbohydrate). The selective conversion of biomass-derived carbohydrates to LA requires efficient catalytic systems that can overcome the recalcitrance of the biomass, namely the stiff-necked structural integrity of cellulose and the kind of strong interactions between …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Effect of machining parameters on the tool wear in drilling of 3D PF C/C composite
Abstract: Carbon–carbon (C/C) composites are broadly used in aerospace, defence, shipbuilding, chemical, and nuclear industries owing to their high strength-to-weight and stiffness-to-weight ratios. However, they are brittle, anisotropic and non-homogeneous in nature, making them difficult to machine. Incorrect machining parameters can cause defects such as burrs, delamination, and fibre bundles pullout. This paper aims to study the hole surface and tool wear during drilling of 3D pierced fabric (PF) carbon-carbon (C/C) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 269–281 Read article
-
Representation-Theoretic Symmetry Reduction and Fuzzy-Grey Optimization of Modular Vibration Systems
Abstract: This paper presents a representation-theoretic framework for symmetry-aware vibration control in modular structural systems. Exploiting cyclic symmetry, the mass, damping, and stiffness operators are block-diagonalised into irreducible representations, reducing the full structural dynamics to a collection of lower-dimensional modal subsystems. This decomposition provides both computational efficiency and a rigorous mathematical description of symmetry-preserving dynamic behaviour. To account for imperfections arising in practical implementations, near-symmetry defects in stiffness and damping are …
Published in Emerging Trends in Symmetry · Vol. 2, Issue 1, 2026 · pp. 22–30 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Tailoring the Compressive Behavior of Tetra-Chiral Auxetic Structures through FDM Process Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetra-chiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have a number of useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetra-chiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
A Comprehensive Clinical Study with Ajamodakataila Matrabasti in the Management of Katigraha
Abstract: Katigraha is a Vataja Nanatmaja Vyadhi and it is explained as a condition characterized by Shula and restricted movements of Kati caused by Shuddha or Sama Vayu. Basti is considered as supreme therapy for Vatavyadhis. Matrabasti has dual action both Shodhana as well as Brimhana effect. In classics, no references are available for Ajamodakataila. So, it is considered as Anubhuta yoga and in the present study two ingredients are considered …
Published in Research and Reviews : A Journal of Ayurvedic Science, Yoga and Naturopathy Read article
-
Study of Behavior of Buckling Restrained Bearing Frame Along with Soil Structure Interaction
Abstract: Lateral forces due to earthquake are the major consideration for design of earthquake resisting structures, these forces can be resisted by various systems like braced frames, shear walls, moment frames, etc. Energy dissipation is one of the most convenient option for earthquake resistance, as it can absorb input energy from earthquake protecting the main structure. Past research revealed that the Buckling Restrained Braces (BRB) are the best type of energy …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Lumped Construction Sequence for Column Shortening Analysis in High Rise Building with Outrigger System
Abstract: The exact value of column shortening is not a straightforward task. Various parameters are affected on column shortening results like rate of construction sequence and reinforcement ratio. The building should stand with high stiffness and must be able to resist lateral deformation without having discomfort to the user. The excessive drift is controlled by using outrigger system. In high rise buildings, the construction sequence analysis and conventional sequence analysis are …
Published in Recent Trends in Civil Engineering & Technology Read article
-
Cubic B-splines for Isogeometric Analysis of Laminated Composite Plates Subjected to Hygroscopic Loading Using Classical Laminated Plate Theory
Abstract: Composite laminates are inevitably used in several engineering structures due to their high strength and stiffness to weight ratio. The laminates are subjected to change in moisture content and the flexural behavior leads to change in the strength. Presence of moisutre may induce residual stresses and strains. Isogeometric analysis is a well-proven method to perform analysis of laminated composite plates. The main focus of this study is to apply isogeometric …
Published in Journal of Polymer & Composites Read article
-
Enhancing the Strength of Black Cotton Soil with Enzyme and Industrial Waste
Abstract: Expansive soils are troublesome and prone to ground movements, which can cause substantial damage to underlying buildings as well as a loss in bearing capacity. Moisture fluctuation activates the expansive character of soils, causing it to swell and shrink. This has long been known in geotechnical engineering. To treat expansive soils, a variety of stabilizing additives such as lime, cement, and fly ash have been employed. In recent years the …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 1, Issue 1, 2023 · pp. 1–11 Read article
-
A Comprehensive Survey of Structural Applications for Concrete-Filled Steel Tubes
Abstract: A composite section made from a hollow steel tube after concrete has been poured inside of it is known as Concrete filled steel tube. CFT is a high-performance component that combines the impact of steel confinement with the design freedom of concrete. It resists applied stress by fusing concrete and steel. The interaction of steel tubes and concrete gives CFST its strength, and as a result, it has become more …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 184–196 Read article
-
Retrofitting of RC Beams Using FRP and FRCM
Abstract: The deterioration of reinforced concrete (RC) structures due to various factors such as aging, aggressive environments, or increased loads poses significant challenges to structural integrity and safety. Retrofitting techniques have emerged as effective solutions to enhance the structural performance of existing RC members. Among the retrofitting options, the use of Fibre Reinforced Polymer (FRP) and Fibre Reinforced Cementitious Matrix (FRCM) systems have gained considerable attention in recent years. The study …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 31–40 Read article