Search
113 articles for “micro-hardness test”
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 326–340 Read article
-
Effect of Solutionizing and Ageing on Mechanical Properties of AL2024 Reinforced Alumina Particulate
Abstract: AbstractAluminium 2024 alloy is widely used at automobile and aircraft industries in the form of cast component with varying section size. This study investigates how the microstructure and mechanical properties of AL2024 alloy before and after heat treatment processes. Solution sing at 493°C-5H followed quenching in water at room temperature. Stir casting method is followed to obtain the required composite material with proper mixing of reinforcement. Further, the mechanical properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 8–12 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques
Abstract: In this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising a route B_C at room temperature for this experiment. To evaluate the effect of AA5083, the microstructure, mechanical attributes, and wear parameters of the alloy were examined both prior to and subsequent to undergoing this technique. Using an optical microscope, microstructural investigations were performed on the pressed alloy's flow …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 270–286 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Synthesis, Characterization and Deformation Studies of Blast Furnace Slag Particles Reinforced Aa2024 Composite
Abstract: The main objective is to explore the use of blast furnace slag as a reinforcing material. This work provides results of aluminum metal matrix composites reinforced with granulated slag (GS). The Composite is prepared by taking AA 2024 and GS with stir casting process. Optical microscope and scanning electron microscopy were employed to track the reactions between the aluminum matrix and the granulated slag during the sintering treatment. The hardness …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 31–43 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Cross-Domain Comparative Analysis of Microwave Imaging Systems for Medical Diagnostics and Industrial Testing
Abstract: Microwave imaging is gaining significant traction as a non-ionizing, low-cost, and portable alternative to conventional diagnostic and inspection modalities in both medical and industrial domains. Leveraging the dielectric contrast between healthy and anomalous tissues or materials, microwave imaging systems enable early-stage detection and characterization of pathological or structural anomalies. This review provides a detailed comparative analysis of microwave imaging systems tailored for three critical applications: breast cancer detection, brain stroke …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 2, 2025 · pp. 39–48 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Smart Attendance System by Integrating RFID: Arduino Technology and GSM
Abstract: This paper is aiming to overcome this problem by using RFID-ARDUINO approach in web-based laboratories attendance system. An Arduino Uno microcontroller board will be used as the hardware platform. The key aim of this project is to automatically record the presence of the staffs, using active RFID tags. Each staff is provided with his/her authorized RFID tag. The serial number of each tag is related with each staff’s database. The …
Published in Journal of Mobile Computing, Communications & Mobile Networks · Vol. 6, Issue 2, 2019 · pp. 21–28 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Synthesis and formability of Al/(Fe-Mn) particulate compositeusing stir casting
Abstract: Demand for lightweight and fuel economy by automotive and aircraft industries focuses to explore different materials. Alloys and composites developed with same objective to obtain superior desired mechanical properties compatible for such intended applications. However, alloy consider as solid solutions with metallic properties and cannot mix with primary major element in random proportions. This forced researcher community to develop composites, which are heterogeneous solid solutions or multi-phase materials comprising matrix …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 80–88 Read article
-
Microstructure and Mechanical Characterization of AA390 and Si3N4 Metal Matrix Composite Using Severe Plastic Deformation
Abstract: Metal matrix composites (MMCs) have significant attention in recent years due to their potential for improved mechanical properties compared to conventional monolithic materials. This study focuses on the microstructure and mechanical characterization of a MMC comprising AA390 aluminum alloy reinforced with Si3N4 particles. The severe plastic deformation (SPD) process, Equal Channel Angular Pressing (ECAP), was employed to fabricate the composite with enhanced mechanical properties. The ECAP method was chosen as …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 17–30 Read article
-
Development of Multilayer Metallic Coatings with Graded Interfaces for Enhanced Wear and Fatigue Resistance in Aerospace Components
Abstract: This study presents a comprehensive investigation into the development and characterization of multilayer metallic coating systems with compositionally graded interfaces, specifically engineered to enhance wear and fatigue resistance in aerospace structural and rotating components. Four coating architectures were systematically designed: (i) CrN/TiAlN bilayer, (ii) TiN/TiAlN/TiAlSiN gradient trilayer, (iii) CrAlN/AlCrN nanolaminate, and (iv) a novel five-layer CrN–TiN–TiAlN–AlCrN–TiAlSiN functionally graded system (FGS). Coatings were deposited via high-power impulse magnetron sputtering (HiPIMS) and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 50–67 Read article