Search
475 articles for “mechanical testing”
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Influence of Hybrid Fiber Reinforcement on the Interfacial Bonding and Fracture Toughness of Epoxy-Based Polymer Composites Under Cyclic Loading
Abstract: This study investigates the influence of hybrid fiber reinforcement on the interfacial bonding and fracture toughness of epoxy-based polymer composites under cyclic loading. Carbon, glass, and aramid fibers, both individually and in hybrid combinations, were incorporated into the epoxy matrix to evaluate their thermal, mechanical, and fatigue-resistant properties. Thermal characterization revealed distinct material behaviors, with carbon fibers exhibiting superior thermal conductivity, while glass and aramid fibers provided enhanced thermal stability. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 799–824 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Polymer Electrolytes for Flexible Energy Storage
Abstract: The research explores polymer electrolytes as promising materials for flexible energy storage applications, driven by the growing demand for wearable and portable electronics. Polymer electrolytes, including solid, gel, and composite types, offer key advantages such as mechanical flexibility, lightweight design, and improved safety over traditional liquid electrolytes. This study reviews recent developments in materials like polyethylene oxide (PEO), polyvinylidene fluoride (PVDF), and ionic liquid-based systems, focusing on their ionic conductivity, …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 27–35 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Investigation and Optimization of Resistance Spot Welding Parameters for Stainless Steel
Abstract: The present work examines the significant impact of resistance spot welding (RSW) process parameters on the properties and efficacy of connections created in sheets of 316L stainless steel. This study examines the intricate relationship between welding parameters, investigating their influence on the microstructure, mechanical characteristics, and overall efficacy of welded connections. By employing a methodical experimental methodology, this study thoroughly investigates the impact of different factors in resistance spot welding …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 15–21 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Composite Gel-Fibers and Solid-State-Processed Tapes Based on Disentangled Ultra-High Molecular Weight Polyethylene and Electrically Conductive Carbon Black: a Comparative Study
Abstract: In this study, oriented nanocomposite gel-spun fibers and solid-state-processed tapes were manufactured and analyzed. The fibers and tapes were produced using a specific type of nascent disentangled ultra-high molecular weight polyethylene (UHMWPE) reactor powder. As the filler, commercially available electrically conductive carbon black (CB) was used. The ultra-high filler content values up to 75 wt.% were achieved for the UHMWPE/CB gel-spun fibers, while the degree of filling was limited (up …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 151–165 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
ML-Based Predictive Modeling of Mechanical Properties in 3D-Printed Polymer Composites for IoT Applications
Abstract: This study aims to develop an interpretable and high-accuracy machine learning framework for predicting the mechanical properties of 3D-printed fiber-reinforced polymer composites, with a focus on structure–property correlations relevant to polymer processing and functional performance. Composite specimens based on PLA and ABS matrices were fabricated using FDM with varying weight fractions (5–20 wt%) of carbon and glass fibers. Standardized mechanical testing (ASTM D638, D256, D790) was performed to evaluate tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 61–78 Read article