Search
149 articles for “lamination”
-
Recording of Surface-Driven Laminar Flow in Dual Sudden Expansion Microchannel of a Single SU-8 based Glass Microfluidic Device
Abstract: In this work, the SU-8 based glass microfluidic device is fabricated by maskless lithography and indirect bonding technique. A dual sudden expansion microchannel is designed and fabricated inside this fabricated glass microfluidic device. Dyed water is prepared as working liquid by mixing commercially available food dye with distilled water. The surface-driven laminar flow of dyed water inside the fabricated microchannel is recorded by a CMOS camera. This experimental work is …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 1, 2020 · pp. 24–27 Read article
-
VIBRATION ANALYSIS OF WOVEN HYBRID CARBON-KEVLAR COMPOSITE LAMINATES
Abstract: Composite materials have revolutionized the field of engineering and design, providing the ability to combine two or more materials with different properties to create new materials with enhanced characteristics. The intricate process of weaving together carbon fiber and Kevlar fiber to create a 3D composite fabric is not only fascinating but also results in a beautiful, intricate pattern. Hand weaving is an art that requires precision and skill, and when …
Published in Journal of Polymer & Composites Read article
-
Artificial Neural Network Based Prediction of Impact Loads and Thickness in CFRP and GFRP Composite Laminates
Abstract: Recent technological advancements, particularly the integration of neural networks, have facilitated a predictive approach to complex engineering problems, especially those involving composite materials with directional properties. The scarcity of literature on predicting impact damage using experimental and ultrasonic flaw detection data motivated this study. Experimental assessment of impact damage on carbon fiber/epoxy (CFRP) and glass fiber/epoxy (GFRP) composites was conducted using low-velocity drop weight impact testing. Damage assessment employed an …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 34–45 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Experimental Investigation on Hybrid Laminated Composites Reinforced with Basalt-Pineapple-Bamboo Fibers
Abstract: In the majority of technological applications, particularly in automotive and building materials, natural fibre-reinforced composites are now more common. Natural fibre developments have seen a tremendous rise in demand recently. As a filler material, Snail Shell Powder was utilized in the current work to evaluate the mechanical and thermal characteristics of hybrid reinforced composites constructed from natural fibres such as basalt, pineapple, and bamboo. Snail shell powder weighed six grams …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 9–15 Read article
-
Correlating the Damage Behaviour of Polymer Composites with the Potential Energy of the Impactor
Abstract: Design of structures using composites requires comprehensive evaluation and characterization of mechanical properties in both undamaged and damaged state. Composite laminates undergo combinations of mechanical loading resulting into microdamage accumulation in the plies. The first mode of damage is usually intralaminar cracking with the crack plane transverse to the middle plane of the laminate, spanning the whole width of the laminate. The density of cracks in a ply depends on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 1–9 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
Response of Sea Water Immersed GFRP Composite to Thermal Shock
Abstract: The work involves examining the effects of sea water immersion and temperature fluctuations, precisely that of up and down thermal shocks (lower to higher and vice-versa), on the glass fiber /epoxy laminated composites. These effects are studied in terms of sea water absorption, degradation in inter laminar shear strength (ILSS), alternations in the glass transition temperature (Tg) as compared to the untreated samples and finally listing up of the mode …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 34–41 Read article
-
Experimental Investigation of Date palm Leaf Fiber reinforced with polymer matrix composite.
Abstract: The demand for composites incorporating robust fibers is significant across diverse industries, driven by the favorable attributes of strength, lightness, and cost-effectiveness. Within GCC countries, date palm (DP) serves as a valuable source of cellulosic fibers, highly esteemed for its widespread availability. These fibers can be sourced from midribs, spadix stems, leaflets, and mesh. Date palm leaf fibers are becoming more and more popular as a way to strengthen composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 40–48 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Drilling Effect on Fiber Composites: A Review
Abstract: Composites laminates show immense mechanical properties like strength-to-weight ratio, damage tolerance, fatigue and corrosion resistance therefore conventional materials are replaced by composites in many areas such as automobile and aircraft structure. Machining of composites is very difficult than machining of a conventional material because composites are inhomogeneous and extremely abrasive. In production drilling is important machining process used to produce hole for riveted and bolted joint. There are many improvements …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 42–50 Read article
-
Drilling of Composite Materials: A Review
Abstract: In today’s world composites are replacing metals due to their superior properties such as light weight; low wear rate etc. Composites are widely used in automobile, aerospace and aircraft structural components. While drilling composite laminates, because of high hardness, they are difficult to machine, which results in low drilling efficiency and undesirable drilling induced delamination. The present paper is intended to focus on review of various works reported on drilling …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 2, 2015 · pp. 1–10 Read article
-
Identification of Elastic Constants of Polymer based Composites through Vibration Test Data
Abstract: This paper presents sex per mental and analytical methods of determining elastic constants of two different kinds of materials. Elastic constants of unidirectional glass/epoxy laminates and Aluminium from the measured eigenfrequencies has been performed. Traditional ‘strike method’ is adopted for the exciting the structure and response is obtained through accelerometer. Vibration analysis is carried out using frequency response function (FRF) measurement technique to determine natural frequencies and mode shapes. Elastic …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 16–21 Read article
-
A Review on Impact Analysis of Composite Armor
Abstract: Understanding the type of wave generated in a faulty region is important when using one of the main non-destructive testing tools, ultrasonic research. Recent dispersed research demonstrates that because of their low impact execution, layered composites have limited uses in cutting-edge auxiliary frameworks. The purpose of this inquiry is to provide new scientists who are working on ballistic-related topics with broad information on the most frequently used materials and ballistic …
Published in Trends in Mechanical Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 1–9 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Tubular Linear Induction Motors
Abstract: In this paper a mathematical model of tubular linear induction machines (TLIM) with hollowed induced part is recalled. Moreover, the design criteria of a TLIM with hollowed iron induced part are presented as well as the technological processes to be adopted and the choice of materials to construct the various parts. The methodologies for mechanical assembling and electric wiring are considered too. A prototype with bimetallic induced part has been …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 3, 2020 · pp. 28–32 Read article
-
Mechanical and Wear Characterization of Fly Ash, Coconut Shell Ash and Rice Husk Ash Dispersed Epoxy Glass Composites
Abstract: Over the last few decade the use of fibre reinforced polymer composite materials has increased considerably. Fiber reinforced composite processes some unique properties due to that it is used in various technological areas such as space, aircraft, marine and automotive. In recent years there is lot of research going on, to enhance the different properties of composite materials by using different filler materials. In present study different filler materials like …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 10–16 Read article