Search
165 articles for “compression test”
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Investigating the Effect of Rubber as Partial Coarse Aggregate Replacement on Concrete Performance
Abstract: The growing challenge of managing scrap tire waste presents an opportunity for recycling these durable materials into concrete production. This research investigates the mechanical properties of concrete with waste tire rubber chips incorporated as a partial replacement for coarse aggregates at 0%, 5%, 10%, and 15% by volume. The study evaluates workability, compressive strength, and tensile strength, alongside durability assessments in a 5% sulphuric acid solution. Initial findings indicate that …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 11–17 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Improving the Performance of Self-compacting Concrete Using Optimized Admixture Combinations
Abstract: This study explores the influence of various admixture combinations on the performance of Self-Compacting Concrete (SCC), with an emphasis on its flow behavior, compressive strength, tensile strength, flexural strength, and resistance to impact. Various admixtures, including Air-Entraining Agent (AEA), Water-Reducing Plasticizer (WPC), Retarder (RET), and Accelerator (ACC), were incorporated into the SCC reference mix (SP + VMA) to evaluate their impact on SCC performance. A series of tests—such as slump …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 81–89 Read article
-
Dynamic Performance Enhancement of Polymer Composites through Metaheuristic machinining optimization
Abstract: This work aims to provide an optimization of meta-heuristic algorithms in order to improve the dynamic behavior of composite materials utilized in various practical engineering tasks. Based on the Comprehensive literature review it has been observed that composite sandwich panels with PVC foam cores accomplished mechanical characteristics superior than those ones that were produced on PU foam core mainly in flexural, compression, and impact tests Thus the study establishes the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 114–129 Read article
-
To Study Properties of Concrete by Using Manganese Ore Aggregate
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Energetic and Exergetic Investigation on Vapor Compression Refrigeration System Using Ag₂O-R134a Nanofluid as Refrigerant
Abstract: This paper experimentally explored energetic and exergetic performance investigation of VCR System using Ag₂O-R134a Nanofluid as Refrigerant. The integration of silver oxide (Ag₂O) nanoparticles within polymer and composite materials offers promising avenues for enhancing the thermal and physical properties of advanced systems. The energetic and exergetic performance study of VCR were investigated with test parameters including compressor power consumption, cooling capacity, coefficient of performance (COP), discharge temperature, irreversibility in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 279–287 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
A comprehensive study on elemental analysis and sustainable integration of CETP (common effluent treatment plant) sludge as a substitute to sand in concrete
Abstract: This study examines the utilization of sludge from common effluent treatment plants (CETP) as a fractional substitute for sand in M20 concrete mixtures. Its aim is to address disposal challenges associated with CETP sludge while promoting sustainable use of natural resources. The research assesses the structural and microstructural attributes of concrete mixes containing varying percentages of CETP sludge (0%, 10%, 20%, 30%, 40%, and 50%). Tests conducted include compressive, flexural, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 49–59 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Physico-Mechanical Behavior of Euphorbia Abysinica and Wood Chips Composite
Abstract: In this study, we prepared composite test specimens from Eucalyptus chip particles of sizes 0.5 mm, 1 mm, and 2 mm combined with Euphorbia-Abyssinica fluid at an 80:20 mass ratio. We produced the particleboard under a compression load of 150 KN and kept it in the compression machine for thirty minutes inside the mold. After removing it from the machine, we secured it with C-clamps for twenty-four hours. We covered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
To Study the Effect of Partial Replacement of Cement with Marble Powder and Partial Replacement of Sand with Surkhi
Abstract: The construction industry worldwide has made remarkable progress in building innovative structures using different materials. Today’s increasing population demands more sustainable ways of living. Waste matter produced in the day-to-day life as well as industrial waste has become a cause of concern. Many waste materials have been used in construction industry like flyash, saw dust, natural fibers residue etc. Keeping in mind the above concern a low cost, environment friendly …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 46–54 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article