Search
178 articles for “and hybrid reinforcement”
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Effect of hybridization on mechanical Characteristics of hemp,bamboo and jute reinforced epoxy bio composites
Abstract: In the present study, hemp, jute and bamboo fibres have been reinforced with epoxy resin to develop several bio-composites (hemp/epoxy, jute/epoxy, bamboo/epoxy, hemp/jute/epoxy, hemp, bamboo, epoxy and hemp/jute/bamboo/epoxy). Their mechanical characteristics (impact strength, flexural strength, and tensile strength) have been evaluated by conducting standardized ASTM tests on the fabricated bio-composite specimens. Among these, the hybrid epoxy composite reinforced with hemp, jute, and bamboo fibers has exhibited superior tensile and impact …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 81–91 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Deep Reinforcement Learning-Based Intelligent Energy Management Strategy for Battery–Supercapacitor Hybrid Energy Storage Systems in Electric Vehicles
Abstract: As the number of EVs increases, smart solutions for energy management are needed that will optimize energy use, prolong battery life and boost vehicle performance. The application of conventional rule based and optimization-based Energy Management Strategies (EMS) for Battery–Supercapacitor Hybrid Energy Storage Systems (HESS) often leads to sub-optimal power management, supercapacitor mismatch and battery degradation when subjected to varying driving conditions. This study aims to design an intelligent energy management …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Advancements In Al6061 Metal Matrix Composites: The Role of SiC, Al₂O₃, and Graphite Reinforcements in Enhancing Properties and Applications
Abstract: Al6061-based metal matrix composites (MMCs) reinforced with silicon carbide (SiC), graphite (Gr), and aluminum oxide (Al₂O₃) exhibit a unique combination of mechanical, thermal, and tribological properties, making them highly suitable for advanced engineering applications. SiC enhances hardness, wear resistance, and load-bearing capacity, while Al₂O₃ improves thermal stability and mechanical strength. Graphite provides self-lubricating properties, reduces friction, and lowers the composite's density, improving fatigue resistance. The synergy of combining these reinforcements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 90–98 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
Comparative Evaluation of Fiber-Reinforced Composite and Elastic Fiber Posts in Reinforcing Peri-Cervical Dentin: an In-Vitro Study
Abstract: This study evaluates the fracture resistance of short-fiber reinforced composite and elastic fiber posts compared to conventional hybrid composites in reinforcing peri-cervical dentin of endodontically treated teeth. Methods: The crowns of thirty single-canal mandibular premolars were resected to achieve a dimension of 4mm from 1mm below the highest point of the proximal cervical line. In Group 1, teeth underwent endodontic treatment with gutta-percha filled up to the cement-enamel junction (CEJ) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 143–149 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
A Review on Integrated Acoustic Emission and Piezoelectric Sensing for Real-Time Damage Characterization of Polymer Composite-Enhanced Concrete: Advances, Challenges, and Future Perspective
Abstract: Polymer composite reinforced concrete has been identified as an efficient material system that can enhance the mechanical properties, durability, and service life of modern structures. The combination of fiber reinforced polymers (FRPs), polymer modifiers, and hybrid composite reinforcements increases structural effectiveness. However, these systems are still vulnerable to damage processes, including matrix cracking, fiber breaking, interfacial debonding, and delamination. Thus, there is a need for structural health monitoring (SHM) strategies …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 930–939 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
AI-Driven Optimization of Biopolymer Composite Formulations Using IoT Data Streams
Abstract: Biodegradable polymer composites have emerged as a sustainable alternative to petroleum-based materials in packaging, biomedical, and structural applications. However, traditional formulation techniques for reinforced polymer composites often lack precision and fail to adapt to real-time variations during processing, resulting in suboptimal material performance. This research proposes a real-time AI-IoT-enabled framework to optimize biopolymer composite formulations. The goal is to intelligently tune composite properties such as mechanical strength, moisture resistance, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 85–100 Read article