Search
69 articles for “Hard coating”
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature
Abstract: Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is due to its high hardness, fatigue strength, and chemical resistance. Nevertheless, the EN coverings' effectiveness at high temperatures, as well as their heat resistance, have yet to be evaluated. The current work investigates the tribological properties, namely friction and wear, of EN coatings at increased temperatures (100 ºC, 200 ºC, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 12–17 Read article
-
Characterization Techniques for Thin Film Coatings Based on SiO₂, TiO₂, and ZrO₂
Abstract: Thin film coatings made from silicon dioxide (SiO₂), titanium dioxide (TiO₂) and zirconium dioxide (ZrO₂) have attracted great interest owing to their excellent optical, electrical, mechanical and chemical properties. These oxide thin films are widely used in microelectronics, solar cells, sensors, biomedical devices, photocatalysis, anti-reflective coatings and protective layers. The structural, morphological, compositional, optical and mechanical properties of these coatings are closely related to their performance and reliability. Therefore, thorough …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Chemical Processing of SU-8 Photoresist to Record the Surface-Driven Microfluidic Flow of Dyed Working Liquid in the Regime of Fluid Mechanics
Abstract: Chemical processing of negative photoresist SU-8 is performed to fabricate a set of three individualSU-8 based glass microfluidic devices inside the cleanroom laboratory. The major steps of SU-8processing are spin coating using a spin coater, soft baking, ultra-violet (UV) exposure, post exposurebaking, development by SU-8 developer, and hard baking. The indirect bonding for leakage-freesealing is used during hard baking to fabricate the microfluidic devices. Author has prepared thedyed water to …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 53–57 Read article
-
Bioequivalence Studies of Pantoprazole Tablets
Abstract: Pantoprazole is a most popular drug, which are used in peptic ulcer and widely distributed in India. Present study is done to assessment parameter of enteric coated Pantoprazole tablets. Two brands of Pantoprazole tablets were collected from Rampur for their assessment test. All brands demonstrated well-designed and good-looking external features. Tablets were reliable in hardness, friability, thickness, and weight. Brands f1, f2, exhibited sufficient mechanical strength to resist fracture and …
Published in Trends in Drug Delivery · Vol. 5, Issue 1, 2018 · pp. 6–9 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Metal Surface Coating Through Welding Processes
Abstract: The adversity of service conditions limits the service life of components. The replacement cost of the components is extremely high. Surfacing technique offers benefits in reducing materials costs and, in salvage applications, enables an expensive or difficult-to-replace part to be reclaimed and restored to operation with minimum of downtime. Industries involved in surfacing operations use various fusion welding especially arc welding processes. These operations demand high deposition rates but at …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 23–27 Read article
-
Surface Modification by Electro-discharge Coating and Its Characterisation
Abstract: Applications of coated surface are swiftly increasing in present industrial context. Recently, the electro-discharge route is being explored for surface modification in terms of alloying and layer deposition. Electro-discharge machining parameters and response to surface deposition is of the research interest in electro-discharge coating. In this regard, electro-discharged surface modifications have been characterized in the present investigations. The effect of relevant EDM parameters (current, Pulse duration, duty factor, density of …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 43–50 Read article
-
Optimizing Machinability in Wire EDM of AISI P20 Steel Employing Composite Material Wires with Hybrid Neural Network Approach
Abstract: AISI P20+Ni steel is extensively used for forging dies, plastic moulds, and automotive die components due to its excellent polishability, hardness, and homogeneity. This research utilizes Wire Electrical Discharge Machining (WEDM) to process pre-hardened AISI P20+Ni steel, focusing on minimizing both recast layer thickness (RLT) and kerf width (KW). The performance of wires made from composite materials, including zinc-coated brass wire (ZBW), cryogenically treated ZBW (CZBW), and ultrasonic vibration-assisted brass …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1120–1133 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
A review on Methodology used for Dry Turning of AISI 52100 Steel
Abstract: Bearing steel like AISI 52100 is one of the most widely used high cutting steel in industry for manufacturing of bearing. A large amount of coolant is used for machining at high speed due to which increase there has been a significant increase in environmental hazards. So Green or Dry manufacturing with optimize cutting parameters and its effect on tool material & work piece quality need to be studied to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 467–475 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Effectiveness of Extensional Damping Using Rubber as Layer
Abstract: Structural damping treatments are free layer damping and constrained layer damping, made of metal and viscoelastic layer combinations which help to reduce vibrations. A free layer damping (FLD) treatment also known as Extensional Damping is formed by applying a coating of a damping material to one side of a structure. The treatment may be symmetric or asymmetric, and applied to beams, plates or shells in bending or in tension. In …
Published in Trends in Mechanical Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 36–39 Read article
-
A Ventilated Dual-Function Photonic–Phononic Metasurface for Simultaneous Passive Radiative Cooling and Low-Frequency Noise Mitigation in Building Envelopes: Conceptual Design and Computational Feasibility Analysis
Abstract: Acoustic metamaterials for sound insulation and photonic/radiative-cooling metamaterials for passive thermal management have each matured separately for building-envelope retrofit, but existing studies address ventilation, acoustic damping and radiative thermal control in isolation, and no reported unit-cell architecture co-designs all three within a single shared structure. This gap persists because materials that are acoustic absorptive are generally dense and structurally opaque, whereas materials that are highly solar-reflective are conventionally applied to …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
A Review Paper on Minimisation of Sand Casting Defects through Quality Improvement Methods
Abstract: Casting is a process of producing near net–shape metal components. It requires detailed planning, execution and quality inspection to ensure not only the dimensional accuracy of casting parts but the metallurgical integrity and mechanical properties of castings. This paper reviews the different types of casting defects such as shrinkage porosity, cold shut, sand inclusions, mould failure, surface hardening occurring in foundries. These defects directly affect on profitability and quality level …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 10–17 Read article
-
An Overview on Use of Plastic Waste as Road Construction Material
Abstract: The usage of plastic in our environment is expanding day by day due to rising population urbanization, evolution, activities, and changing in life manner. This waste plastic is spreading mostly on the land. This waste plastic is becoming hard job to decompose due to its non-biodegradable property. Eventually, plastics are not decomposed scientifically and potential to create soil, air, and marine pollution as well as water pollution. Therefore, the waste …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 59–66 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article