Search
606 articles for “BLE”
-
Wideband Microstrip Slot Antenna Using Shape Blending Algorithm
Abstract: For the effective wireless communication over long distances, the antennas with wideband operation and narrow beam widths are the requirements for the evolving modern mobile devices. This paper presents the design and analysis of the wideband patch antenna with slot using shape blending algorithm. The major advantage of this algorithm is to optimize the shape of the radiating element by applying Heaviside function to improve the performance characteristics of the …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 1, 2022 · pp. 19–27 Read article
-
Comparative Analysis of Blend of Virgin PVC and NBR with Recycled PVC and NBR
Abstract: AbstractStudies conducted on blending of polymers like acrylonitrile butadiene rubber (NBR) and polyvinylchloride (PVC) to produce new polymeric materials with specific properties which can be used for some special applications. This blend has been formulated for products working in contact with castor oils. Blends at different temperature indicate that an optimum temperature existes for its formation. Incorporating PVC in various compositions has enhanced their physico-mechanical and chemical properties of this …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 12–14 Read article
-
Synthesis and Characterization of Certain Biodegradable Chitosan/Lactic Acid-based Polyester Blend Films
Abstract: AbstractBiodegradable blend films based on chitosan with poly(ethylene glycol lactate-co-ethylene glycol terephthalate), PEGLT and poly(butylene lactate-co-butylene succinate), PBLSA, were prepared by solution-mixing and film-casting method. The main objective of this investigation was the study and characterization of chitosan/lactic acid-based polyester blends which are useful as bio-packaging material for potential food applications. The first part of the investigation was related to the synthesis and characterization of polyesters, PEGLT and PBLSA by …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 35–45 Read article
-
Evaluation of Test Performed on Suspension by the Use of ZnO as Blending Agent for Measurement of Mechanical Characteristics
Abstract: This paper entails about the analogy performed on the rear unit-spring loaded hydraulic damper. The focus is laid upon the measurement of mechanical properties when the suspension unit is preloaded. Dynamic load test rig is employed for the accurate and precise measurement of values generated during the test. The suspension unit is preloaded with some initial velocity and the corresponding values are being generated. ZnO as a blending agent along …
Published in Trends in Mechanical Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 33–37 Read article
-
Evaluation of Different Blended Fertilizer Type and Rate for Better Production of Wheat in Meskan Woreda, Guraghe Zone Ethiopia
Abstract: In Ethiopia, wheat accounts the fourth level from the total cultivated area and production. Application of balanced essential elements is required to improve production of wheat. However, its productivity is mainly constrained by lack of site-specific fertilizer (NPSB) recommendation in the study area. Therefore, field experiment was conducted at Meskanworeda during 2018/2019 and 2019/2020 main cropping season to evaluate the effect of different blended fertilizers on yield and yield components …
Published in Research & Reviews : Journal of Botany · Vol. 11, Issue 1, 2022 · pp. 13–19 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · pp. 56–66 Read article
-
Comparative Analysis of Polyethylene Terephthalate Based Blended Lean Mortar Mixes by Applying Mathematical Simulations and Regression Approach
Abstract: Currently, construction manufacturing units need an abundant number of non-renewable resources rising in the quarrying of natural strata, producing a disparity in our precious environment. Besides this, a plentiful amount of waste material like plastic waste in several forms such as solid, filler, etc., is generated gradually. Therefore, efficient sustainable disposal seemed like a threatening mission across the world. To mitigate the issue, in the present investigation, fine aggregate (sand) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 60–70 Read article
-
Thermal Analysis of Kirloskar VCR Engines Using Blended Biodiesels under Varying Loads
Abstract: The increasing demand for sustainable energy has prompted much research into environment-friendly substitutes for traditional fossil fuels. In this study, the thermal performance and emission characteristics of Kirloskar Variable Compression Ratio (VCR) diesel engines evaluated with varying load conditions using biodiesel-sourced oil blended with soybean oil are discussed. B0 (pure diesel) to B100 (pure biodiesel) blends were considered for the study to assess their effects on parameters, like brake thermal …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 1, 2025 · pp. 19–34 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Injection Pressure Optimization for Non-edible Biodiesel Blends in CRDI Engines: A Comparative Study
Abstract: The growing demand for clean and sustainable energy has increased interest in biodiesel produced from non-edible oil sources. These fuels are renewable, biodegradable, and do not compete with food resources. However, the effective use of biodiesel blends in modern diesel engines requires proper control of fuel injection parameters, particularly injection pressure. In common rail direct injection (CRDI) engines, injection pressure strongly influences spray formation, air–fuel mixing, combustion behaviour, and exhaust …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 2, 2025 · pp. 24–34 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Comparative Study of Tire Oil and Cashew Nutshell Oil Biofuel Blends with Diesel
Abstract: We are going to compare Cashew Nutshell Oil (CNSO) diesel blend and Tire Oil diesel blend in this paper. Usually, Cashew Nutshell Oil is produced from the waste that is collected from cashew nut industry. Tire oil is the liquid fuel that is produced from waste tires. Many tests were going on to study the fire point of both CNSO and Tire oil blends. Kinematic viscosity is high in case …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 7–12 Read article
-
Biodiesel Blends in Diesel by Improvement of Cold-Flow Properties of Karanja and Jatropha Biodiesel
Abstract: In this paper performance analysis of blends, Method for improving the cold-flow properties of jatropha and Karanja based biodiesel are described. Biodiesel fuels made from saturated fatty acids will have a greater cloud point and pour point than those obtained from unsaturated fatty acids. Thegoal of this study is to look at the cold flow parameters of 100% biodiesel and biodiesel mixes in diesel engines. The cold flow characteristics of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 12, Issue 3, 2021 · pp. 1–12 Read article
-
The Rheological Effect of SiO2 Nanoparticles Additives for NBR/CR Blends
Abstract: The rheological alteration of NBR/CR after adding various nano-quantities of silicon oxide (0–50) wt.% was studied. The rheological properties that were tested are viscosity, scorch time, cure time and max torque. Oscillating disk rheometer was used for measuring the above properties. The experimental results have shown that the silicon oxide additives have a good effect on viscosity and max torque during vulcanization, but at the same time the scorch and …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
Fuel Economy and Mass Emissions of Ethanol Blended Gasoline over the Modified Indian Driving Cycle
Abstract: AbstractEthanol, a renewable alternative fuel can be used in gasoline vehicles as blend with gasoline without any major engine modification. Use of ethanol is increasing trend in India due to its increase in availability, energy security and emission reduction potential. Currently, 10% ethanol blended gasoline is available in India and ethanol percentage share in gasoline is increasing one. A large number of studies on ethanol-gasoline blends on stationery or automotive …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 3, 2018 · pp. 8–13 Read article
-
Studies on Mechanical, Thermal Properties, Characterization and UV-Accelerated Weathering of HIPS-PLA Blends using Glycerol as Compatibilizer
Abstract: AbstractHIPS (High Impact Polystyrene) was blended with PLA (poly lactic acid) in three formulations as 80:20, 65:35 and 50:50% (wt%) using a twin screw extruder and by using glycerol (4%) as compatibilizer. Test specimens were prepared by using an injection moulding machine and the mechanical, thermal and electrical properties were determined. The tensile strength first decreases and then increases with increasing percentage of PLA, but lower than that of both …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 1–11 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Effect of ZrO2 nanoparticles on Electrical conductivity of PVA/PVP polymer blend doped with ammonium iodide
Abstract: This work reports the properties of solid polymer electrolyte films obtained via incorporating varying amounts of ZrO2 nanoparticles into the PVA/PVP polymer blend with ammonium iodide salt. Material synthesis was done by the solution casting technique. Frequency dependent impedance and conductivity parameters of polymer electrolyte films were investigated at different temperatures (303K-353K) using impedance spectroscopy. The results of ionic conductivity of prepared polymer blend samples at various temperatures were studied …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 85–94 Read article
-
Mechanical Properties of Hybrid Elastomer Blends
Abstract: Novolac nano additives (0–40) wt.% were added to NBR/CR hybrid blends and study the influence on mechanical properties of rubber. Mechanical properties included: hardness, resilience, and Compressibility. The results obtained from IRHD test, hardness test and compression test shown that the novolac nano additives has a positive effect on the hardness of hybrid rubber, where the hybrid rubber hardness increases with increasing the amount of novolac nano additive. In the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 13–17 Read article
-
Performance Analysis and Investigation of Emission and Economical Analysis of Diesel Engine by Using Palm Oil Blend with Diesel Fuel: A Review
Abstract: Palm oil (PO) is one of the vegetable oils that have potential for use as fuels for diesel engines. PO is renewable and is safe and easy to handle. The main objective of this research work was to optimize the performance and emission of four stroke, single cylinder, indirect injection, water cooled diesel engine operating on palm oil and diesel blend. One non edible vegetable oil like palm oil is …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 18–28 Read article