Search
1727 articles for “and temperature”
-
Passenger car fuel economy: Insights from big data analytics
Abstract: The increasing availability of real-world vehicle telematics through On-Board Diagnostics II (OBD-II) systems has enabled data-driven evaluation of passenger car fuel economy beyond conventional laboratory-based test cycles. While standardized certification procedures ensure repeatability, they often fail to capture the influence of real-world traffic conditions, driver behaviour, and transient vehicle operation. This study presents a structured Big Data Analytics (BDA) approach for analysing high-frequency OBD-II data collected from a gasoline passenger …
Published in Journal of Automobile Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 9–21 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Energetic and Exergetic Investigation on Vapor Compression Refrigeration System Using Ag₂O-R134a Nanofluid as Refrigerant
Abstract: This paper experimentally explored energetic and exergetic performance investigation of VCR System using Ag₂O-R134a Nanofluid as Refrigerant. The integration of silver oxide (Ag₂O) nanoparticles within polymer and composite materials offers promising avenues for enhancing the thermal and physical properties of advanced systems. The energetic and exergetic performance study of VCR were investigated with test parameters including compressor power consumption, cooling capacity, coefficient of performance (COP), discharge temperature, irreversibility in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 279–287 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
Urban Green space Site Suitability analysis of Angul City, Odisha – A Geospatial Approach
Abstract: The urban ecological system is crucial for human survival in cities. Residents receive various services directly or indirectly from the functions of ecosystems, known as ecosystem services. Heat stress in urban areas can be particularly harmful, as the negative effects of increasing urbanization lead to significant temperature changes that impact both vulnerable species and human health. While there are several methods, such as modifying roof materials and using lighter colors, …
Published in Journal of Remote Sensing & GIS · Vol. 17, Issue 1, 2026 · pp. 16–24 Read article
-
IoT-Enabled Multi-Sensor Accident Detection and Automatic Rescue Alert System
Abstract: Road accidents and vehicle instability caused by skidding, engine overheating, and improper braking behavior remain major concerns in modern transportation systems. This project presents an intelligent vehicle safety and accident detection system that integrates multiple sensors and control logic to enhance driving safety and reduce accident severity. A vibration sensor is employed to detect collision or impact events and accurately identify vehicle accidents. An accelerometer sensor is used for real-time …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 4, Issue 1, 2026 · pp. 9–19 Read article
-
Optimized Machine Learning Framework for Battery State Prediction in Smart Charging Systems
Abstract: Good estimation of battery states, including State-of-Charge (SoC), State-of-Health (SoH), and Remaining Useful Life (RUL), are important in managing energy wisely and controlling the adaptive charging. This work introduces a streamlined machine learning model based on the ability to use multi-dimensional sensor measurements in terms of voltage, current, temperature, and cycle number to forecast battery conditions with high accuracy. Decent preprocessing, such as noise elimination, feature scaling, and calculated features, …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 55–66 Read article
-
Development of a Generative AI Model for Early Detection and Prevention of Electrical Faults in Thermal Power Plants
Abstract: Electrical faults in thermal power plants can lead to severe equipment damage, production downtime, and safety hazards if not detected in advance. This study presents the development of a Generative Artificial Intelligence (GenAI) model for the early detection and prevention of electrical faults using predictive analytics. The proposed framework integrates Generative Adversarial Networks (GANs) with deep learning (CNN) and machine learning algorithms (Random Forest, Logistic Regression) to enhance data diversity, …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 45–54 Read article
-
Nanostructure-Induced Thermoelectric Enhancement in Bi₂Te₃ Nanorods Design, Analysis, and Performance Evaluation
Abstract: Thermoelectric materials capable of efficient energy conversion near room temperature are critical for waste heat recovery applications. In this work, solution-grown Bi₂Te₃ nanorods were synthesized via a trioctylphosphine-assisted thermal decomposition route, and the influence of surfactant-induced nanostructuring on their thermoelectric properties was systematically investigated. Structural analysis using X-ray diffraction and Rietveld refinement confirmed the formation of rhombohedral Bi₂Te₃ with the emergence of Bi₂Te₃–BiTe nanocomposites at higher surfactant concentrations. Electron microscopy …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 34–44 Read article
-
Analysis of Hybrid Photovoltaic Thermal (PV/T) Integrated Solar Dryer: An Experimental Validation
Abstract: In this study, a hybrid photovoltaic thermal (PV/T) integrated solar dryer has been designed, developed, and experimentally analyzed to evaluate its performance in real-world climatic conditions. The system incorporates a UV-stabilized sheet mixed-mode tent house structure, installed on the rooftop of a building located in Bhilai, Chhattisgarh, India. The dryer is equipped with a thermal collector directly connected to the drying chamber to enhance heat transfer efficiency. Experiments were conducted …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 1–6 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Compatative Catalytic Study of Oxidation of Thiourea by Chromium (VI) in Presence of Different Catalysts and Micelles
Abstract: The series of catalysts like acetate, oxalate, EDTA, the varies micelles viz, CTAB, SDS, TRITON X-100 was carried out in the kinetic study of oxidation of Thiourea by Cr(VI) as an oxidant in water medium. The effect of catalytic efficiency has been study for varies catalyst and micelles by volumetric method and UV spectroscopic methods. The product was confirmed by IR studies. UV study reveals shows that higher catalytic efficiency …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 9–21 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article