Search
1068 articles for “reinforce”
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
A Review on Advances in Polymer Composites and Nanocomposites: Design, Applications, and Life Cycle Assessment
Abstract: Materials based on polymer composites and nanocomposites have won the main status in several regions of industry by mare possessing excellent properties and broad range of application. This review focuses on the advancements in the design of fiber-reinforced polymers, structural composites, multifunctional composites, and biomimetic and eco-friendly composites. Emerging developments in biomedical composites, polymer foams, and smart composites are explored, highlighting their applications in medical, aerospace, automotive, and structural engineering. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 244–251 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
ML-Based Predictive Modeling of Mechanical Properties in 3D-Printed Polymer Composites for IoT Applications
Abstract: This study aims to develop an interpretable and high-accuracy machine learning framework for predicting the mechanical properties of 3D-printed fiber-reinforced polymer composites, with a focus on structure–property correlations relevant to polymer processing and functional performance. Composite specimens based on PLA and ABS matrices were fabricated using FDM with varying weight fractions (5–20 wt%) of carbon and glass fibers. Standardized mechanical testing (ASTM D638, D256, D790) was performed to evaluate tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 61–78 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Advances in Polymer-Based Orthodontic Materials for Enhanced Treatment Efficiency
Abstract: Polymers, particularly shape-memory polymers, fiber-reinforced composites, and elastomeric materials, provide enhanced mechanical properties such as flexibility, durability, and controlled force application, leading to improved treatment outcomes. These materials offer superior biocompatibility, reducing irritation and discomfort for patients while ensuring efficient and predictable tooth movement. It is important to note one of the key advancements in orthodontics is the use of shape-memory polymers, which can respond to temperature or external stimuli, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1016–1024 Read article
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Adaptive Machine Learning Framework for Navigation Control of Autonomous Drones
Abstract: The rise of autonomous drones has expanded UAV applications across sectors like surveillance, delivery, agriculture, and rescue operations. However, traditional navigation systems face limitations in adapting to dynamic environments. This study proposes an AI-driven adaptive navigation framework that leverages real-time sensor data, reinforcement learning, and adaptive control strategies to enhance drone autonomy, scalability, and security. The system processes mission inputs, environmental data (from LiDAR, cameras, GPS, and weather sensors), and …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 3, 2025 · pp. 1–7 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article