Search
552 articles for “Optics”
-
Design of Plasmonic Based Splitters for WDM Applications
Abstract: AbstractPlasmonics has special property of metallic nanostructures to allow manipulation and routing of light at nanoscale. In this paper, 1×2 and 1×4 splitters are designed using metal-insulator-metal (MIM) plasmonic waveguides. These proposed splitter designs could be used to conquer various filtering devices for high assimilation in surface plasmon polaritons based metallic surfaces. The results are verified using finite difference time domain (FDTD).Keywords: Plasmonics waveguides, surface plasmons, finite difference time domain …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 1, 2016 · pp. 14–19 Read article
-
Analysis of LC Oscillation Presence and Its Impacts in 765 kv Line Connected With Non-Switchable Shunt Reactor
Abstract: AbstractThe transmission lines are one of the most important parts of the power system. The number of line faults in transmission line is more compared with the total number of faults in the whole power system. Distance protection is commonly used in long transmission lines. It works on the basis of increase or decreases in predetermined value of circuit admittance, impedance, or reactance. Shunt reactors are connected in high voltage …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 1, 2016 · pp. 20–24 Read article
-
Effect of Surface Wettability on the Surface-Driven Capillary Flow in SU-8 Microchannels
Abstract: AbstractSU-8 microfluidic devices have been fabricated by the maskless lithography. Passive capillary flow is suitable to manipulate liquid in the lab-on-a-chip systems. The surface-driven capillary flow of dyed water in each microfluidic device has been recorded and analysed. The measured static water contact angles are 72.6°and 81.2° on the hydrogenated amorphous carbon (a-C:H) deposited flat surface and Si-a:C:H deposited flat surface respectively. Either, a-C:H or Si-a:C:H has been deposited on …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 2, 2016 · pp. 24–29 Read article
-
Comparative Study on Red Tacton with Other Technologies
Abstract: AbstractRed tacton is a communication between the object and the human. This technology is easy to use services and it activates the communication. This paper describes about the networking through touching in the human body for the transmission of the data. This networking technology was developed by Robin Gaur Jind, he described that the body of the human with safe and speed. The red tacton is a chip which is …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 2, 2016 · pp. 30–34 Read article
-
Analysis of Modulation Response of a 450 nm True Blue Semiconductor Laser by Varying Differential Gain
Abstract: AbstractIn this work the analysis of modulation response of a 450 nm InGaN based multi-quantum well (MQW) true blue semiconductor laser have been presented. The internal designing of 450 nm blue laser has been done before. but the desired wavelength of 450 nm was obtained by adjusting the exact concentration of In0.211Ga0.789N/Al0.07Ga0.93N in this work. The effects on modulation response by varying the differential gain have been observed. Also, the …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 1, 2015 · pp. 1–8 Read article
-
On Tuning Mechanisms In Existing Recent Patents on Tunable Photonic Crystals
Abstract: AbstractThis manuscript studies the photonic band gap tuning mechanisms in recent patents on tunable photonic crystals and suggest ideas to enhance the tuning control capability of photonic band gaps in these patents.Keywords: Photonic crystals, external stimulus, tunable spectraCite this Article:Anirudh Banerjee. On Tuning Mechanisms In Existing Recent Patents on Tunable Photonic Crystals. Trends in Opto-electro & Optical Communication. 2015; 5(1): 19–21p.
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 1, 2015 · pp. 19–21 Read article
-
A Survey on Congestion Control in Wireless Network Using Different Protocols
Abstract: AbstractThis paper presents a complete summary of work on congestion control in wireless network within the layers of the wireless network protocol. This paper is about the wireless network and the congestion in wireless network, describe the routing protocols such as proactive and reactive protocols (DSDV, DSR and AODV). Explain queue management and types of queue management such as Active Queue Management (AQM) and Passive Queue Management (PQM) and their …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 2, 2015 · pp. 6–11 Read article
-
An Efficient Approach for Detection of Wormhole Attack in MANET
Abstract: AbstractMobile Adhoc Network (MANET) consists of a huge amount of the mobile nodes with wireless communications and computation capabilities. Due to their diverse applications, Adhoc networks are appealing for use in many domains. These networks operate in the license free frequency band and do not require any investment in infrastructure, making them attractive for military and selected commercial applications. Security is a central concern in the MANET. The MANET is …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 2, 2015 · pp. 12–22 Read article
-
Throughput Analysis of Proactive and Reactive MANET Routing Protocols Over FTP and CBR
Abstract: communicating with nodes while not the utilization of network infrastructure or any centralized administration. Manet is taken into account a group of a wireless mobile node. there's variety of manet routing protocol or are developed however these all the protocols don't seem to be capable of manufacture economical routing of packet in sizable amount of node because as a result of their own limitations. Ad hoc routing technology has been …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 2, 2015 · pp. 23–26 Read article
-
Performance Optimizing of a Simulated Model of a Fabry-Perot based Tunable Laser Operating at 1550 nm
Abstract: AbstractThe paper presents data for an optimized Fabry-Perot tunable laser, with a wavelength tuning range of 56.3 nm, with a high output power of 17.4307 dBm. Incentive for this research has been due to the cause that Fabry–Perot semiconductor laser diodes have been fine contenders as transmitters to be used in WDM optical networks. The proposed system is capable of modulating a maximum bit rate of 26.58 Gb/s, with an …
Published in Trends in Opto-electro & Optical Communication · Vol. 4, Issue 3, 2014 · pp. 23–31 Read article
-
High Modulation Performance of a Designed InGaN Based 405 nm Multi-Quantum Well Violet Laser
Abstract: AbstractIn this work, the modulation performance characteristics of a designed 405 nm InGaN based multi-quantum well (MQW) Violet Laser are optimized and presented by varying injection current and differential gain. A maximum output power of 222.53 mW and a maximum resonance frequency of 18.79 GHz of the laser are obtained for 117 mA injection current, where, the differential gain is 4x10-16cm2. The differential quantum efficiency of the laser is obtained …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 2, 2013 · pp. 7–13 Read article
-
Optimization of Indium Concentration for Obtaining Enhanced Performance of 980nm InxGa1-xAs/GaAs MQW VCSELs
Abstract: AbstractIn this work, an optimization of Indium concentration of 980 nm InxGa1-xAs/GaAs MQW VCSELs is presented with the aim of improving dynamic performance of the VCSEL. An improved modulation performance is obtained by optimizing Indium concentration of x=0.2. A high modal gain and low transparency carrier density contributes to a high optical output power for In0.2Ga0.8As/GaAs MQW VCSEL. A highest modulation bandwidth of 11.625 GHz is obtained for In0.2Ga0.8As/GaAs MQW …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 2, 2013 · pp. 14–21 Read article
-
Improved Performance Characteristics of a Designed 1050 nm Bottom Emitting MQW VCSEL using Al0.25Ga0.22In0.53As/InP Materials
Abstract: AbstractIn this work, the design and performance characteristics of a bottom emitting Al0.25Ga0.22In0.53As/InP Multi-Quantum Well (MQW) Vertical-Cavity Surface-Emitting Lasers (VCSEL) have been presented for operation at a wavelength of 1050 nm. The transparency carrier density and bandgap energy of the QW and barrier materials are computed. An improved performance of the designed VCSEL has been obtained by selecting a material with high gain and lower transparency carrier density in the …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 3, 2013 · pp. 22–30 Read article
-
Effect of ETL layer thickness on perovskite (CH3NH3PbI3) solar cell
Abstract: Abstract: Thickness of ETL (Electron transport layer) shows important role in term of stability and efficiency of perovskite solar cells. In this paper the numerical simulation and extensive modeling have been performed on perovskite solar cell using perovskite material such as methyl ammonium lead Iodide (MAPbI3, MA=CH3NH3) with the help of SCAPS tool. The electrical properties of the MAPbI3 material used as active layer, have been calculated for different parameter …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 1, 2019 · pp. 32–37 Read article
-
Modeling of Photovoltaic Module with MATLAB/Simulink
Abstract: Abstract The generation of electrical energy from sunlight is achieved with an interface called photovoltaic (PV) module. The PV module plays a vital role for extracting electrical energy from sunlight, thus its accuracy is most important parameter for consideration while developing mathematical model of PV module. For higher accuracy the single diode model with series and parallel resistors combination is used. For simulating this device in MATLAB/Simulink we need weather …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 1, 2019 · pp. 38–45 Read article
-
Review on Modern Electronics Communication System and Electromagnetic Spectrum used for Wireless Communication
Abstract: Electronic communication is a modern type of communication system. In modern Electronic communication, by using Electronic instruments or devices we can communicate with each other very easy and fast. For designing instruments or devices, numbers of Electronic circuits are used. Communication takes place by transmitting and receiving information signal by means of Chanel or medium. Information signal like voice, images, videos, different signals, different data, etc are we can communicate …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 2, 2019 · pp. 25–28 Read article
-
Comparative Evaluation of Tin Perovskite based Solar Cell
Abstract: AbstractPerovskite material utilized in manufacturing solar cells as active layer has altogether improved their effectiveness for power change. They possess conversion efficiency impressively more than the traditional technologies, for example, silicon based cells. They likewise have PCE more than the DSSC. They are accounted for to have conversion efficiency of about 20%. There has been a great increment in the estimation of PCE of these cells utilizing Perovskite as active …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 15–18 Read article
-
Einstein Quantum Entanglement and Quantum Communication
Abstract: AbstractQuantum theory suggests that “What we predict must happen in laboratory.” Quantum entanglement was introduced by Einstein, Schrodinger, Rosen and Podolsky in 1935. But the actual experimentation regarding quantum entanglement started 70 years later. Quantum entanglement paves the way for many other quantum processes such as quantum communication, teleportation, and cryptography. The concept of quantum entanglement is very complicated because it is difficult to detect, is affected by environment and …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 1–14 Read article
-
FABRICATION AND COMPRESSIVE TEST ANALYSIS OF CARBON FIBRE REINFORCED NYLON
Abstract: AbstractThe aim of the paper is to study and investigate the effect of carbon fibers (T800), epoxy resin and hardener Tri Ethylene Tetra Amine (TETA) reinforced with nylon rod. There is a wrapping of carbon fiber done on the nylon rod which increases the compressive strength. It is found that compressive strength very with respect to variation of wrapping around nylon rod. The density of final material reduces as the …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 28–32 Read article
-
A Novel Approach to Design Underground Fault Locator in Power Cable
Abstract: AbstractIt is very difficult to find the exact location of cable fault in underground cables; generally, these problems occur in metropolitan cities. A large amount of money is invested in digging the earth. This problem leads to design this project to find out the exact location of the error occurs in the underground cables from the side of the feeder and liquid crystal display show the distance in kilometer and …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 1, 2020 · pp. 31–35 Read article