Search
891 articles for “structural analysis”
-
Wind and Earthquake Mitigation: The Impact of Dampers on Tall Structures
Abstract: This paper provides an in-depth examination of the effects of both earthquake and wind loading on high-rise buildings situated across various terrain categories and seismic zones. The research underscores the critical importance of accounting for lateral loads in the design of reinforced concrete structures, as this consideration is essential for maintaining structural stability and ensuring the safety of occupants. The study focuses on identifying the critical design loads for multistory …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 75–83 Read article
-
Recent Innovations and Trends in Renewable Energy for Offshore Structures
Abstract: The global transition to renewable energy is gaining significant momentum, driven by rapid technological advancements and the urgent need to mitigate climate change. Offshore renewable energy, in particular, is emerging as a critical component in achieving energy security and sustainability. This review provides a comprehensive analysis of recent trends and advancements in offshore renewable energy technologies, including offshore wind, solar, hydrogen, biofuels, and wave energy. Offshore wind energy has witnessed …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Design and Development of an Automated Robotic Algorithm for Blasting, Painting, and Barnacle Cleaning of Offshore Structures
Abstract: Marine surface maintenance tasks such as barnacle removal, abrasive blasting, and protective painting are traditionally carried out using manual methods that are labor-intensive, hazardous, and prone to variability in quality. These challenges are particularly significant for offshore structures, where harsh environmental conditions and restricted accessibility increase operational risks and maintenance costs. This paper presents the design and evaluation of an autonomous robotic system for automated surface preparation and coating of …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 1–12 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Performance Analysis of Dual Junction Solar Cell Devices utilizing Subcells of In0.51Ga0.49P and GaAs to Study Key Solar Cell Parameters via TCAD based Simulation
Abstract: In the present work, a multi-junction solar cell was designed to obtain better performance over single-junction solar cells. The proposed structure is composed of different layers of diverse semiconductor materials stacked on each other. Here, an In0.51Ga0.49P/GaAs double-junction solar cell was outlined as having a distinctive composite material (GaAs) as the tunneling junction. To optimize the solar cell's effectiveness, In0.47Ga0.15Al0.37P was used in the window layer and the back-surface field …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 829–837 Read article
-
Blockchain-Enabled Secure Data Sharing in Mobile IoT Networks
Abstract: The rapid proliferation of mobile Internet of Things (IoT) devices has resulted in an exponential increase in data generation, storage, and sharing, which poses significant challenges related to security, privacy, integrity, and trustworthiness. Traditional centralized architectures for IoT data exchange are inherently vulnerable to single points of failure, unauthorized access, data tampering, and limitations in scalability. Blockchain technology, with its decentralized ledger structure, cryptographic integrity, and consensus mechanisms, provides a …
Published in International Journal of Mobile Computing Technology · Vol. 4, Issue 1, 2026 · pp. 38–44 Read article
-
Dynamic Mechanical Analysis of Carbon Fiber Reinforced Polymer Composites
Abstract: This study investigates the thermal decomposition and mechanical properties of Fiber-Reinforced Polymer Composites (FRPCs) using Dynamic Mechanical Analysis (DMA). The research focuses on improving the recycling and recovery process of Carbon Fiber-Reinforced Polymers (CFRPs), addressing environmental concerns regarding their disposal. By analyzing the effects of different heating rates (5°C and 10°C per minute) and atmospheric conditions (nitrogen, oxygen, and a combination of both), the study identifies optimal parameters for maximizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 386–393 Read article
-
Evaluating the behavior of Concrete after addition of stone dust to steel fiber reinforced concrete
Abstract: In contemporary construction practices, the utilization of concrete has become indispensable for various civil engineering projects worldwide. Concrete, augmented with both natural and artificial fibers, plays a crucial role in bearing compressive loads and efficiently transferring structural loads to the reinforcement and foundation. The current research delves into exploring the transformative effects of different mix designs, incorporating varying percentages of steel fibers, on the behavior of concrete. The study encompasses …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 12–19 Read article
-
Social Media Usage Among Youth in Punjab: Platform Preferences, Usage Habits, and Academic Impact
Abstract: Background: The role of social media in daily life and communication activities continues to grow, especially among young people. Given the shift towards more social interaction and engagement online, it is important to look at the preferences of the platforms, their habits of usage, and how they relate with academic engagement. This research study analyzes the social media utilization patterns of youth residing in Punjab, India with the aim of …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 2, 2025 · pp. 21–30 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An Evaluation of the Impact of a Structured Teaching Program on Staff Nurses' Knowledge of Low Back Pain Prevention in Intensive Care Units at Selected Hospitals in Bangalore
Abstract: The study aimed to assess the knowledge of ICU nurses concerning the prevention of low back pain (LBP), determine the effectiveness of a structured teaching program (STP) in improving their knowledge, and examine the relationship between pre-test knowledge levels and various demographic factors. A pre-experimental research design was utilized, featuring a one-group pre-test and post-test method. The study employed non-probability convenience sampling to recruit 60 ICU nurses for participation. Data …
Published in International Journal of Orthopedic Nursing and Practices · Vol. 2, Issue 2, 2024 · pp. 1–13 Read article
-
A Surgical Exploration of the Mechanism and Regulation of the Respiratory System: A Conceptual Analysis
Abstract: The respiratory system plays a vital role in facilitating the movement of air in and out of the body, comprising a complex network of anatomical pathways. It is conventionally divided into two primary sections: the upper respiratory tract and the lower respiratory tract. Within the upper respiratory tract lie structures extending from the nasal passages down to the vocal cords, crucial for phonation. These vocal cords, composed of mucous membrane …
Published in Research and Reviews : Journal of Surgery · Vol. 13, Issue 1, 2024 · pp. 56–63 Read article
-
Vibration Analysis of Woven Hybrid Carbon-Kevlar Composite Laminates
Abstract: Composite materials have revolutionized the field of engineering and design, providing the ability to combine two or more materials with different properties to create new materials with enhanced characteristics. The intricate process of weaving together carbon fiber and Kevlar fiber to create a 3D composite fabric is not only fascinating but also results in a beautiful, intricate pattern. Hand weaving is an art that requires precision and skill, and when …
Published in Journal of Polymer & Composites Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Divorced Women Attitudes Towards Remarriage: A Qualitative Approach
Abstract: The current study aimed to investigate the attitudes of divorced women regarding remarriage and to comprehend the diverse factors that shape their viewpoints. The research population comprised divorced women, and a purposive sampling method was employed to select participants. Data were collected from ten divorced women through semi-structured interviews, allowing for in-depth exploration of personal experiences and viewpoints. A qualitative research design was adopted to capture the complexity of individual …
Published in International Journal of Behavioral Sciences · Vol. 3, Issue 1, 2026 · pp. 1–14 Read article
-
Optimizing Airline Efficiency Using Big Data and Predictive Analytics
Abstract: Recent technological advancements have resulted in the generation of vast volumes of data across industries, including the airline sector, supporting operational control and service quality. Big Data Analytics (BDA) enables organizations to analyze large and complex datasets to derive actionable insights that support informed decision – making and superior operational performance. This review paper systematically analyzes twenty relevant research studies to explore the application of Big Data Analytics (BDA) within …
Published in Journal of Advanced Database Management & Systems · Vol. 13, Issue 1, 2026 Read article
-
Information Access and Usage Trends among Students of Rajasthan Technical University, Kota
Abstract: The rapid growth of information and communication technologies has significantly influenced the ways in which university students locate, access, and use academic information. The present study examines the information access patterns of students enrolled at Rajasthan Technical University (RTU), Kota, with a focus on the use of electronic resources, print-based collections, and available digital library services. The study aimed to identify the primary information sources favored by students, evaluate the …
Published in Journal of Advancements in Library Sciences · Vol. 13, Issue 2, 2026 · pp. 27–38 Read article