Search
862 articles for “Container”
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
Infectious Diseases: Current Epidemiology, Pharmacotherapeutic Strategies, and Global Health Perspectives
Abstract: Infectious diseases are still a major health challenge in the world, and there is increased strain on the health systems of nations. This review examines the most important issues in the management of infectious diseases, such as the distribution and effect of infectious diseases across the world, pharmacotherapeutic approaches, and the functions of public health interventions. New threats such as antimicrobial resistance (AMR), the contribution of climate change, and the …
Published in Recent Trends in Infectious Diseases · Vol. 3, Issue 1, 2026 · pp. 10–18 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Stretchable Elastomer–Phase Change Composites for Passive Thermal Management in Wearable Electronics
Abstract: Elastomer-embedded phase change material (EPCM) composites are developed as stretchable, leakage-free, and electrically insulating thermal regulation layers for wearable electronics operating under stringent skin-safety requirements. The EPCM architecture comprises microencapsulated organic phase change materials (μPCM, 30–70 wt%) uniformly dispersed within soft elastomer matrices based on PDMS or SEBS-type thermoplastic elastomers, together with low loadings (1–8 wt%) of electrically insulating hexagonal boron nitride (h-BN) fillers to enhance lateral heat transport. Differential …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 30–41 Read article
-
Examining and Analyzing the Double Helical Spiral Mixer's Effectiveness
Abstract: Recent advancements in various mixing mechanisms are being leveraged in the food industry to enhance their success by ensuring product consistency fostering the development of new products and cutting down production costs the choice of mixing equipment is influenced by the types of phases being combined such as liquid-liquid solid-liquid or solid-solid and the physical properties of the final product including viscosity and density both traditional and innovative specialty mixing …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 15–24 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Fire Safety in Healthcare Facilities: An Indian Perspective
Abstract: Fire protection and safety measures in hospitals are of utmost importance to ensure the safety of patients, staff, and visitors. Due to the patients' limited mobility, hospitals are more susceptible to fire disasters. Short-circuits, basements being used as storehouse, inappropriate storage of flammable liquids, improper power supply load, false ceiling panel lined with thermocol, faulty electric wirings, and overheating leading to burning of wires are some of the common causes …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 8–12 Read article
-
Chemical Modifications of Polymer for Improved Anti-Microbial Action
Abstract: Infections caused by pathogenic microorganisms are a significant concern. Polymers, large molecules formed by chemically connecting monomers, have acquired significant interest due to their intrinsic properties. Polymers function as a matrix for the components that contain antibacterial agents. Developing polymers with antibacterial activity is a crucial research area that aims to alleviate the problem of microbe contamination. The antibacterial polymers typically exhibit prolonged effectiveness. Modification of polymers enhances their anti-microbial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1919–1931 Read article
-
Study of pH Behaviour of Slurry on Surface Morphology of Copper Material with Single Pole Magnetic Abrasive Finishing Process
Abstract: The chemical oxidizers—sodium hydroxide, Marshall’s acid salt, and hydrogen peroxide—were effectively employed in the wet polishing of copper using the SPMAF experimental setup. The manuscript explores preparation of slurry used for polishing copper material using single pole magnetic abrasive finishing (SPMAF) framework. The slurry contains distilled water, 1200-grit aluminum oxide abrasives, sodium hydroxide (NaOH), potassium persulfate (K₂S₂O₈), and hydrogen peroxide (H₂O₂), combined in precise amount. Specifically, 100 ml of distilled …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1887–1896 Read article
-
IoT-Enabled Monitoring of AC Condensate Water for Quality Assessment and Early Detection of HVAC System Health
Abstract: The shortage of water and expensive reactive maintenance of HVAC are major problems in the modern building management. The paper introduces an Internet of Things (IoT)-enabled air conditioning (AC) condensate to water resource (predictive maintenance) and sustainable water reuse. The nature of our approach defines the quality of the condensate water at the baseline and indicates that it contains low levels of total dissolved solids (TDS) and has almost neutral …
Published in Journal of Instrumentation Technology & Innovations · Vol. 16, Issue 1, 2026 · pp. 25–35 Read article
-
From Waste to Strength: Hybrid Binder Approach for Sustainable M25 Concrete
Abstract: The growing demand for concrete in infrastructure development has led to increased cement consumption, raising serious environmental concerns due to high energy use and carbon dioxide emissions correlated with cement manufacturing. In this context, the use of industrial residues as partial substitutions for cement has achieved deep focus as a sustainable construction strategy. The current investigations experimentally explore the strength and quality performance of concrete produced using a hybrid binder …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 24–32 Read article
-
3D Printing of Polymer-Based Functionally Graded Materials: Recent Developments and Challenges
Abstract: Additive manufacturing (AM), specifically 3D printing, has become a useful technique for fabricating functionally graded materials (FGMs) because it can facilitate the spatial distribution of materials. Polymer FGMs (P-FGMs) have gained a great deal of interest due to their lightweight, customizable, multifunctional properties. In comparison to conventional fabrication, 3D printing allows better control of composition and microstructure, which results in materials with controlled mechanical, thermal, and biological properties. This review …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 338–347 Read article
-
A Study to Assess the Knowledge Regarding Pradhan Mantri Jan Arogya Yojana (PM-JAY) Among the General Public in a Tertiary Care Teaching Hospital, Kuppam
Abstract: Background: Ayushman Bharat, the flagship scheme of the Government of India, was launched to achieve Universal Health Coverage (UHC) as per the National Health Policy 2017. It aims to address healthcare needs comprehensively by transitioning from fragmented approaches toward a holistic system. Pradhan Mantri Jan Arogya Yojana (PM-JAY) is a pivotal component of this scheme, striving to achieve UHC by providing comprehensive healthcare services to underprivileged families. Assessing public awareness …
Published in International Journal of Community Health Nursing And Practices · Vol. 4, Issue 1, 2026 · pp. 1–6 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Fabrication and Characterization of PLA-CSP Composites via FDM for Biodegradable Food Packaging
Abstract: In light of the growing need for environmentally friendly alternatives to conventional plastic packaging, this study presents the design of a food-grade, biocompatible packaging material composed of Polylactic Acid (PLA) and packed with coconut shell powder (CSP). One of the most well-known thermoplastic polymers, PLA is produced from renewable resources like sugarcane or maize starch. Its nontoxicity, biodegradability, and adherence to food safety standards and regulations provide energy. Unfortunately, PLA's …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1016–1025 Read article
-
Comprehensive Review Article on Nutraceuticals and Herbal Medicines
Abstract: Ayurveda is a roughly 5000-year-old medical system that is mainly practiced in India. It emphasizes the body, mind, and spirit in illness prevention and treatment and incorporates herbal treatments and diet. Ayurveda is one of the traditional medical systems in India. Ayurveda is based on the idea of avoiding needless pain and leading a long, healthy life. Ayurveda employs natural remedies to eradicate the disease's underlying cause by reestablishing equilibrium …
Published in International Journal of Nutritions · Vol. 3, Issue 1, 2026 · pp. 33–41 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article