Search
893 articles for “SR”
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Extra Philadelphia in CML Due to Isodicentric 22: A Case Report
Abstract: Introduction: Chronic Myelogenous Leukemia is a malignancy that affects the hematopoietic stems cells (HSC) of the bone marrow, leading to the rapid and continual proliferation of granulocytes and precursor blast cells. This is caused due to a reciprocal translocation that occurs between chromosomes 9 and 22, leading to the formation of derivative 22 also called as Philadelphia (Ph) chromosome. The Ph chromosome then encodes a fusion oncoprotein that functions as …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 14, Issue 3, 2025 · pp. 18–22 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Modeling and Simulation of Radiative MHD Casson-Type Polymer Composite Flow over a Porous Wedge with Variable Thermal Source and Sink
Abstract: This study presents a numerical investigation of the radiative magnetohydrodynamic (MHD) flow and heat transfer characteristics of a Casson-type polymer fluid over a moving and extending porous wedge under the influence of a spatially varying heat source and sink. The Casson fluid model, representing a class of viscoplastic polymeric materials, is analyzed within the MHD framework to explore the combined effects of magnetic field intensity, rheological behavior, and porous medium …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 837–850 Read article
-
A Review of Shell Programming Applications in Blockchain and Web3 Infrastructure
Abstract: Shell programming has long been an essential tool for automation and system management, but its role in emerging technologies like Blockchain and Web3 infrastructure has become increasingly prominent. This review explores how shell scripting supports various processes within decentralized ecosystems, including node management, smart contract deployment, data synchronization, and continuous integration workflows. As blockchain networks scale in complexity, shell scripts provide efficient solutions for orchestrating automation, security audits, and distributed …
Published in Journal of Advances in Shell Programming · Vol. 12, Issue 3, 2025 Read article
-
TPLO-M: A Dual-Purpose Solution for CCL and MPL in Dogs
Abstract: Cranial Cruciate Ligament (CCL) rupture and Medial Patellar Luxation (MPL) are common orthopedic conditions affecting the canine stifle joint, particularly in small and toy breeds and larger athletic dogs. When these conditions occur together, they pose a significant surgical challenge due to the combined biomechanical abnormalities. Traditional surgical approaches, such as Tibial Plateau Leveling Osteotomy (TPLO) for CCL insufficiency and corrective procedures for MPL, do not adequately address both conditions …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 14, Issue 3, 2024 · pp. 1–10 Read article
-
Comparative Thermal Stability of Structural Acrylic and Polyurethane Adhesives under High Heating Rate Conditions
Abstract: This study examines the thermal stability and degradation characteristics of structural acrylic and polyurethane adhesives through Differential Scanning Calorimetry (DSC) at an elevated heating rate of 15 °C/min. The purpose of this study is to assess the impact of rapid thermal excitation on the volatile loss of adhesives, their curing behaviour, and thermal decomposition profiles elements that are essential in high-speed manufacturing and thermally challenging settings. The findings indicated that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 717–725 Read article
-
Kinetic Analysis of Structural Acrylic Curing by DSC: Polymerization and Phase Transition Optimization
Abstract: Differential Scanning Calorimetry (DSC) was used to analyse the thermal properties and curing behaviour of a structural acrylic adhesive at heating rates of 5, 10, and 15 °C/min. The study focused on the curing kinetics, glass transition temperature (Tg), specific rate (k), and activation energy (Ea) of the polymerization reaction. The material is tested according to ASTM 3418 standards. Results showed that increasing the heating rate shifted the endothermic curing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 726–733 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Electric Vehicle And Charging System
Abstract: The swift expansion of Electric Vehicles (EVs) has generated a demand for smart charging structure. This project outlines the design and employment of an Electric Vehicle Charging System emphasizing power delivery, improved energy control and ease of use. The system combines power electronics, microcontroller-guided monitoring, safety apparatuses and an organized charging protocol to guarantee compatibility, with EV battery types. The suggested charger functions by transforming the AC input into a …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 25–31 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Future Challenges of Photocatalytic Water Splitting: Sustainability
Abstract: Photocatalytic water splitting has emerged as a promising technology for sustainable hydrogen production through the direct utilization of solar energy. This process mimics natural photosynthesis, using semiconductor materials to absorb light and drive the decomposition of water into hydrogen and oxygen. The method provides a sustainable and eco-friendly solution to the global energy challenge by enabling the reduction of carbon emissions. Among various solar-to-chemical energy conversion approaches, photocatalytic water splitting …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 2, 2025 · pp. 43–48 Read article
-
AI-Driven Multi-Objective Optimization of Conductive Polymer Composites for High-Performance Flexible Electronics
Abstract: The development of conductive polymer composites (CPCs) is critical for advancing flexible and wearable electronic technologies. However, the conventional trial-and-error approach to material formulation is time-consuming and often inefficient due to the high-dimensional nature of the design space. This study introduces a novel AI-driven framework that integrates machine learning (ML) with multi-objective optimization to accelerate the discovery of high-performance CPCs. A dataset of 1,000 experimentally reported formulations was compiled, capturing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 734–745 Read article
-
Modelling and Control of Grid-Connected PV–Battery Hybrid System Using Dynamic Voltage Restorer for Enhanced Power Quality
Abstract: The integration of large-scale photovoltaic (PV) systems into modern power grids introduces significant challenges in maintaining power quality, including voltage sags, swells, and harmonics. To address these issues, this study presents a comprehensive modelling and control framework for a grid-connected PV–Battery hybrid system equipped with a Dynamic Voltage Restorer (DVR). The PV array is modelled using detailed mathematical equations, while the DC–DC converter incorporates advanced Maximum Power Point Tracking (MPPT) …
Published in International Journal of Electrical Power and Machine Systems · Vol. 3, Issue 2, 2025 · pp. 43–58 Read article
-
Piezoelectricity: For Power Generation
Abstract: Undeniably, piezoelectric materials are an exciting possibility for serving as a workable energy source; the question is whether technologies at this point in their development are ready for wide-scale application. This requires considering their value in the real context of modern urban environments and ecological conditions. A critical literature review has been carried out in this paper for the identification of the most successful piezoelectric generation techniques that have been …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Role of Solid-State Materials in Development of devices for Internet of Medical Things
Abstract: The Internet of Medical Things (IoMT) represents a transformative paradigm in healthcare delivery, integrating connected medical devices, sensors, and wearable technologies to enable real-time patient monitoring and personalized treatment. Solid-state materials form the foundational infrastructure of IoMT systems, encompassing semiconductors, energy storage materials, sensing materials, and flexible electronics. This article explores the critical role of advanced solid-state materials in enabling miniaturization, energy efficiency, biocompatibility, and enhanced sensing capabilities essential for …
Published in International Journal of Solid State Innovations & Research · Vol. 3, Issue 2, 2025 · pp. 11–18 Read article
-
Impact of Partially Observable Markov Decision Process in Next Generation Satellite for Remote Sensing
Abstract: The integration of Partially Observable Markov Decision Processes (POMDPs) in next- generation satellite systems represents a transformative advancement in remote sensing technology. This article explores how POMDP frameworks address the inherent uncertainties and incomplete observability challenges in satellite operations, including dynamic task scheduling, resource allocation, and adaptive sensing strategies. By modeling satellite decision-making under uncertainty, POMDPs enable autonomous systems to optimize mission objectives while managing constraints such as limited power, …
Published in International Journal of Satellite Remote Sensing · Vol. 3, Issue 2, 2025 · pp. 20–28 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Deploying Fuzzy Logic for Self-Tuning Regulator Design for Motion Control in Modern Electrical Machines
Abstract: Modern electrical machines require sophisticated motion control systems capable of adapting to varying operating conditions, load disturbances, and parameter uncertainties. Traditional self-tuning regulators (STR) based on classical control theory often struggle with nonlinearities, time-varying dynamics, and complex operational environments characteristic of contemporary electric drives. This article presents a comprehensive framework for deploying fuzzy logic in self-tuning regulator design to address these challenges in motion control applications. Fuzzy logic controllers leverage …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 3, Issue 2, 2025 · pp. 11–21 Read article