Search
260 articles for “thermal load”
-
Quasi-Static Thermal Stress Analysis in a Thin Circular Cylinder Due To Internal Heat Generation Under Transient Temperature Conditions
Abstract: This paper is concerned with inverse quasi-static thermal stress analysis in a thin circular cylinder due to internal heat generation under transient temperature conditions. The internal heat generation is modeled as a cylindrical surface heat source located in the annular region along the axial length of the cylinder. This source is placed concentrically inside the cylinder and begins releasing heat spontaneously at a specific point in time. The thin circular …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 17–28 Read article
-
AUTOMOTIVE VALVE-TRAIN COMPONENTS DURABILITY ANALYSIS USING FINITE ELEMENT METHOD APPROACH: A REVIEW
Abstract: An internal combustion (IC) engine valves is poppet valves used to control the flow of air /fuel mixture in the engine and escape of exhaust combustible gases from the engine using intake and exhaust valves respectively. Inside an engine the combustion process majorly depends on timing of Air/Fuel mixture induction and release of gases. Both Intake and Exhaust valve also form a seal between the working space inside the cylinder …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 54–66 Read article
-
Thermal Analysis of Kirloskar VCR Engines Using Blended Biodiesels under Varying Loads
Abstract: The increasing demand for sustainable energy has prompted much research into environment-friendly substitutes for traditional fossil fuels. In this study, the thermal performance and emission characteristics of Kirloskar Variable Compression Ratio (VCR) diesel engines evaluated with varying load conditions using biodiesel-sourced oil blended with soybean oil are discussed. B0 (pure diesel) to B100 (pure biodiesel) blends were considered for the study to assess their effects on parameters, like brake thermal …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 1, 2025 · pp. 19–34 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems
Abstract: Because of their dependable operation and effectiveness, vapor compression refrigeration systems, or vapor compression refrigeration (VCRS), have become popular in commercial, industrial, and residential settings. However, under different thermal loads, classic vapor compression refrigeration (VCR) systems may perform less well in that they are usually built for steady-state conditions and run at consistent speeds. In order to improve a load-responsive VCR system’s flexibility, energy efficiency, and response to changing cooling …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 32–37 Read article
-
Numerical Simulation of a Micro Combined Heating and Power (CHP) for Residential Application
Abstract: In the current times of energy crises, there has been a need to use renewable energy resources to meet the energy demands. The available renewable energy resources are required to be used in a manner that newer technologies can overcome the older ones in terms of performance. In the present study, numerical simulation of a micro combined heating and power (CHP) for different power generation capacities has been done. The …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 24–30 Read article
-
Multi-Objective Optimization of Polymer-Based Functionally Graded Composites for Lightweight Structures
Abstract: Functionally graded composites (FGCs) improve lightweight structural performance by allowing material properties to change smoothly across a component. Polymer-based FGCs (P-FGCs), in particular, are gaining prominence in aerospace, automotive, and biomedical industries due to their excellent strength-to-weight ratio, tunability, and ease of processing. However, optimizing these materials for lightweight structural applications requires addressing conflicting design objectives, such as maximizing stiffness while minimizing weight or enhancing thermal resistance while maintaining manufacturability. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 961–973 Read article
-
Use of Refrigerating Technologies in Cold Chain Solution: A State-of-the-Art
Abstract: This paper reviews the development of cold thermal storage technology. In this work, a review has been carried out of the operating strategies, management and thermal load, cold storage types and storage media, current and alternative possible technology for food transport refrigeration and thermoelectric cooling and power generation used in the cold chain. Conservation and transport of temperature-sensitive materials and applications are discussed. This paper lists over 89 references.Keywords: Cold …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 3, Issue 2, 2012 · pp. 39–60 Read article
-
Phase – Field Modeling of Brittle and Ductile Fracture Under Complex Loading Conditions
Abstract: Phase-field modeling has emerged as a powerful computational framework for predicting fracture behavior in engineering materials, offering a unified description of crack initiation, propagation, branching, and coalescence without the need for explicit crack tracking. This study presents an in-depth examination of phase-field modeling applied to both brittle and ductile fracture under complex loading conditions, including multiaxial stress states, cyclic loading, thermal gradients, and dynamic impact. The phase-field approach regularizes the …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 13–18 Read article
-
THERMAL ANALYSIS OF SQUARE PLATE BY USING FINITE ELEMENT METHOD
Abstract: Thermal analysis of isotropic square plate made up of various materials with thermal load application and different boundary conditions is analyzed in this research. Finite element formulation is carried out in the analysis and the FEM formulation is done in the analysis section of the ABAQUS. In this study, flat Square plate without cut-out which can be assumed as perfect plates which are made up steel, aluminium materials are analysed. …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 81–85 Read article
-
THERMAL ANALYSIS OF PLATE AND BEAM BY USING FINITE ELEMENT METHOD
Abstract: Thermal analysis plate and beam made up of various materials with thermal load application and different boundary conditions are analyzed in this research. Finite element formulation is carried out in the analysis and the FEM formulation is done in the analysis section of the ABAQUS. In this study, flat Square plate without cut-out which can be assumed as perfect plates which are made up steel, aluminium materials are analysed. Finally …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 3, 2018 · pp. 41–47 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Smart HVAC Systems: The Role of IoT and AI in Energy Optimization
Abstract: Heating, ventilation, and air conditioning (HVAC) systems are crucial for maintaining interior comfort and air quality in all types of buildings. However, they also rank among the highest energy users in the built environment. Traditional HVAC systems are evolving into intelligent, networked systems through the integration of Internet of Things (IoT) and artificial intelligence (AI) technologies, as energy efficiency and sustainability become increasingly important across the globe. This review article …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 38–43 Read article
-
Hardware Solution for LVRT Enhancement Techniques in DFIG - A Review
Abstract: With the advancement of wind power technology, penetration of wind power to power systems has increased significantly. Grid codes require that the wind generators should remain connected for specified time even under low voltage conditions. Stricter grid code requirements are now necessary to assure system stability and reliability due to the growing integration of wind power into contemporary power networks, which is being pushed by the quick development of wind …
Published in International Journal of Electrical Power and Machine Systems · Vol. 3, Issue 2, 2025 · pp. 59–73 Read article
-
Thermal Interaction Analysis Between Flexible Magnetic Abrasive Brush and Aluminium Alloy During Single-Pole MAF
Abstract: Magnetic Abrasive Finishing (MAF) is a precision surface‐finishing approach that employs magnetic abrasive particles (MAPs) within a managed magnetic field to eliminate micro-level material and enhance surface condition. In the finishing process, the friction created between the workpiece and the flexible magnetic abrasive brush (FMAB) leads to heat accumulation, which may badly affect the surface integrity. This study focuses on investigating the temperature distribution at the FMAB–workpiece interface to decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1906–1918 Read article
-
Thermal Response of Thick Beam Subjected to Thermo-mechanical Loads by Using HyperbolicShear Deformation Theory
Abstract: In this paper, a hyperbolic shear deformation theory (HPSDT) taking into account transverse shear deformation effect is presented for thermo-mechanical stress analysis of thick isotropic beam subjected to thermo-mechanical. The displacement field contains two variables. The hyperbolic sine and cosine function is used in the displacement field in terms of thickness Co-ordinate to represent the effect of shear deformation. The most important feature of the theory is that, the transverse …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 22–30 Read article
-
Fatigue Failure Analysis of a Railway Wheel Using FEA
Abstract: In a railway transportation system, the railway wheel is the hardest and most critical component. Technological developments in the manufacturing of railway wheels in industries have made it possible to significantly extend the fatigue life of wheels. The manufacturing industries perform three tasks: aiding in train movement, supporting the carloads and also acts brake drum in the vehicle. The serious problems in railway engineering are fatigue design of a wheel …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 22–30 Read article
-
AI-Driven Intelligent Energy Management System for Enhancing Electric Vehicle Efficiency and Range
Abstract: Electric Vehicles (EVs) are crucial in mitigating the emission of greenhouse gases and facilitating sustainable transportation. Their performance is however limited by the capacity of the battery, unpredictable weather conditions and ineffective use of energy. The paper suggests an AI-based Intelligent Energy Management System (IEMS) to increase EV efficiency and driving range. The suggested system combines machine learning (ML), model predictive control (MPC), and real-time data analytics to optimize power …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 2, 2026 Read article
-
Review of Shock-Boundary Layer Controlled Interactions Studies in High Speed Intakes
Abstract: Normal 0 false false false EN-US X-NONE X-NONE The present work review about the studies conducted by various researchers on shock-boundary layer interactions and their control in high speed intakes. The shock-boundary layer interactions have been a topic of immense interest among the researchers for past many decades due to their associated aerodynamic and aerothermodynamic phenomena. The sudden retardation at the shock impact point promotes, either the boundary layer thickening …
Published in Journal of Aerospace Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 1–14 Read article