Search
349 articles for “thermal analysis”
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Heat Absorption and Conversion Thermal Efficiency Analysis on Mass Concrete Embedded Water Pipes as Permanent Roof
Abstract: The solar thermal storage ability of Concrete roof structures was analysed by placing water pipes made of Galvanized pipes embedded inside the top plaster. The performance parameters such as the inlet and outlet water temperatures, ambient temperature and solar radiation has been recorded and indicates positively on embedding this system in to real time roof structures. Studies were carried out at Aluva, South West India (10.1004° N, 76.3570° E). The …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 22–27 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article
-
Thermo-mechanical Modeling and Analysis of Heat Exchangers for Enhanced Performance in Renewable Energy Systems
Abstract: A comprehensive review of the thermo-mechanical properties of heat exchangers used in renewable energy facilities is presented in this research study. Heat exchangers are essential components of many renewable energy resources like biomass boilers, geothermal power plants, and solar thermal systems. It is crucial to comprehend their thermo-mechanical behavior in order to maximize efficiency, guarantee dependability, and increase operational lifespan. This work explores the complex interactions between mechanical stresses and …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 1, 2024 · pp. 13–19 Read article
-
Thermal Interaction Analysis Between Flexible Magnetic Abrasive Brush and Aluminium Alloy During Single-Pole MAF
Abstract: Magnetic Abrasive Finishing (MAF) is a precision surface‐finishing approach that employs magnetic abrasive particles (MAPs) within a managed magnetic field to eliminate micro-level material and enhance surface condition. In the finishing process, the friction created between the workpiece and the flexible magnetic abrasive brush (FMAB) leads to heat accumulation, which may badly affect the surface integrity. This study focuses on investigating the temperature distribution at the FMAB–workpiece interface to decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1906–1918 Read article
-
Control of Powdery Mildew of Sheesham (Dalbergia Sissoo) in India through Radionics Computer and Nanotechnology from Kuwait
Abstract: Powdery mildew is a common fungal disease caused by different fungi on different hosts including field crops, vegetable crops, fruit trees, ornamentals, and woody trees. Sheesham (Dalbergia sissoo) is one of the most common and important timber and woody trees in the Indo-Pak subcontinent. An experiment was conducted to control the growth/spread of powdery mildew caused by the fungus (Phyllactinia dalbergiae) growing on ‘Sheesham’ (Dalbergia sissoo) tree leaves. The infected …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 106–113 Read article
-
Detailed review on adsorption refrigeration system for different adsorbent/adsorbate working pair green composite materials – An environmental aspect
Abstract: Adsorption refrigeration is one of the greatest encouraging system for the refrigeration applications due to use of low grade energy. Present study deals with detailed review of adsorption refrigeration system. This article mainly concern with adsorption refrigeration arrangement by the utilization of most appropriate operational pairs namely activated carbon/methanol, silica gel/water and zeolite/water. Detail review carried out to predict thermal analysis and performance of the system. Mechanical properties of the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 1–9 Read article
-
Prediction and Comparative Analysis of Thermal Conductivity of Jatropha Oil-based Hybrid Nanofluid by Multivariable Regression and ANN
Abstract: In the present study, a multivariable regression (MR) and artificial neural network (ANN) method was used to predict the thermal conductivity of Jatropha oil-based ZnO-Ag hybrid nanofluid. Firstly, the ZnO-Ag hybrid nanoparticles were synthesized and mixed in the jatropha oil to prepare various nanofluids at different volume concentrations (F) ranging from 0.05 to 0.20%. The stability and thermal conductivity of the prepared nanofluids were investigated. Wide ranges of temperature and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 32–39 Read article
-
Comparative analysis of thermal conductivity of the hybrid nanoparticles based sunflower and Jatropha vegetable oil
Abstract: Vegetable oil gained much more interest towards sustainable manufacturing as coolant due to its inherent properties. In this present study, the thermal conductivity of hybrid nanoparticles based sunflower and Jatropha vegetable oil are measured. ZnO-Ag Hybrid nanoparticles were mixed with sunflower and Jatropha vegetable oil in four different volume concentrations of nanofluids ranges from 0.05 to 0.20%. The thermophysical properties viz, thermal conductivity and Stability of prepared hybrid nanoparticles-based vegetable …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 164–171 Read article
-
Experimental Analysis Of Thermal Behaviour Of Phase Change Materials In Cooling Applications Of Roof Top Building Slabs
Abstract: In this research article, different phase change materials are incorporated inside the slabs to reduce the heat transfer from the roof. Experiments are conducted during summer season March 2021 to the time lag decrement factor and heat flux to that of results are compared with RCC slab to that of Green material I (CaCl26H2O) and Green Roof with Green material II (48%CaCl2+4.3%NaCl+0.4%KCl+47.3%H2O). On comparison Green Slab II is having better …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 102–114 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Composite Fluid Hydraulic Lift
Abstract: In the industrial application hydraulic lifts have a variety of applications on a massive scale. As the energy resources required for the operation are relatively high as compared to the output provided by lifts, there is an alarming rate to optimize the process. So, to bridge the gap we have come up with an innovative and exclusive fabrication of the hydraulic lift systems based on the use of Composite Fluids …
Published in Recent Trends in Fluid Mechanics Read article
-
Comparative Analysis of Polymer-Enhanced and Conventional Magnetorheological Fluids in E-Bicycle Semi-Active Suspension
Abstract: In light of the increased use of electric bicycles as a sustainable transport means, various mechanical challenges emerge which were absent in traditional bicycles, primarily concerning vibration isolation and riding comfort. Indeed, hub motors, batteries and the entire drivetrain system produce dynamic excitations which passive suspension cannot handle effectively. This paper presents a comparison of conventional magnetorheological (MR) fluid and the polymer-based MR nanocomposite fluid within the context of semi-active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
An Experimental Investigation on Surface Roughness of Laser Beam Machining of Aluminium Alloy
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Failure Analyses of 16 mm Thick SA 516 GR 70 Auto Clave
Abstract: With the acceleration of global industrialization, there is a demand for high-or low-pressure storage of liquids or gases. Because of the complicated operating conditions that will inevitably encounter a possible hazard, pressure vessel design is a critical responsibility. Previous failure studies have revealed that the presence of local loads and discontinuities increases pressure vessel fracture. As a result, a detailed examination of pressure vessel steel from the standpoint of fracture …
Published in Trends in Mechanical Engineering & Technology Read article
-
Factors Influencing the Design of Parabolic Trough Collector: A Review
Abstract: Due to limited resource availability and high conventional energy usage, research into renewable energy has increased during the past few years. Utilizing collecting systems, significant renewable energy can be produced from the available solar radiation. The majority of solar energy harvesting systems use parabolic trough concentrating collectors. The performance of parabolic trough collectors as a whole is examined in this paper. The operating characteristics, such as the type of receiver …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 1–8 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article