Search
32 articles for “Steel-fiber-reinforced composites”
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Effect of Polymer Modified Fibers on Strength of Concrete
Abstract: AbstractThe results of an experimental investigation to study the effects of hooked steel fibers with varying dosage and polymer latex with fixed dosage in concrete are studied. In this experimental study, varying volume fraction of hooked steel fibers from 0% to 7% by weight of cement at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight of cement were used. All specimens …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 15–24 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article
-
Behavior of SFRC composite pile resting on sloping ground of cohesive and non-cohesive strata
Abstract: Reinforced concrete piles are increasingly being utilized in situations where there is a need to transfer loads in deep strata, particularly for infrastructure projects built on sloping grounds. The present study comprises a finite element analysis (FEA) to investigate the lateral load-bearing capacity of steel fiber reinforced concrete (SFRC) pile, embedded in sloping grounds with sandy and clayey soils. The lateral load capacity of the steel fiber reinforced concrete pile …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 19–31 Read article
-
AI-Driven Topology Optimization of Woven Fiber-Reinforced Composite Chassis Structures for Electric Vehicles Under Crash Loading
Abstract: The structural design of an electric vehicle (EV) chassis represents a unique engineering challenge to achieve minimal weight while meeting occupants' safety requirements during high-energy crash conditions without compromise to the battery housing's integrity or the geometrical constraints of the electric powertrain package. In this paper, a single framework is proposed to integrate physics-based artificial intelligence (AI) surrogate models using PINNs, CNN-accelerated topology optimization, and FEA to design woven fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 72–89 Read article
-
Experimental Investigation of High Strength Geopolymer Concrete
Abstract: This paper presents the experimental studies concerning high strength in geopolymer concrete. So far many researches were carried out in geopolymer concrete and also it enhances the strength and durability of OPC concrete. Several compositions of geopolymer concrete mixes were executed by varying the percentage of fly ash and GGBS. By finding the optimum percentage of fly ash and GGBS from the experimental results, the mechanical properties of geopolymer concrete …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 29–31 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Role of Polymer and Composite Materials in Enhancing Durability and Comfort of Urban Park Furniture for Senior Citizens
Abstract: Parks in urban areas are crucial in facilitating physical activities, socialization, and or mental health to the elderly citizens. Nonetheless, the traditional materials in outdoor park furniture may suffer in the form of low durability, weathering, ergonomics and maintenance, among other aspects and restrict long term applications of such furniture by the elderly population. The research question examined in the proposed study is: How can polymer-based and composite materials improve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 297–311 Read article
-
Effect of Reinforcement on Bearing Capacity of Sand
Abstract: The reinforced earth concept, which is now being evaluated with increased significant encompasses formation of a composite of a soil with tension resistance reinforcing elements such as metallic and nonmetallic strips, bars, rods fibers or nets in the soil. The objective of using the reinforcement is to supress the normal tensile strains in the soil mass through frictional interaction. Flexible nature of reinforced earth mass enables it to withstand large …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 3, 2014 · pp. 8–12 Read article
-
Finite Element Analysis and Validation of Axial Capacity of RC Columns Made of Steel Fiber Reinforced Concrete (SFRC)
Abstract: Steel Fiber Reinforced Concrete (SFRC) possesses many excellent dynamic performances such as; high resistance to explosion and penetration. It has little effect on pre-cracking behavior in uniaxial compression, but substantially enhances its post cracking response. This response leads to a greatly improved ductility and toughness. Steel fibers in SFRC are capable of preventing crack propagation as well as brittle failure of columns under uniaxial compression. To this end, four reinforced …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
Design and Development of Lightweight Polymer Composite Manifold Using CF-ABS and GFRP for Aerodynamic Energy Recovery in Electric Vehicles
Abstract: Electric vehicles provide a number of advantages over conventional fuel vehicles due to their low to no emissions. High energy efficiency improves the driving performance of Electric vehicles. However, they have to face certain challenges such as the high purchase cost of batteries and lack of battery charging facilities. The major drawback of an Electric vehicle is to store sufficient energy to run the vehicle for a long time. This …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1186–1206 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article