Search
118 articles for “Patch antenna”
-
Study of Effect of Various Dielectrics on the Performance of Electromagnetic Bandgap Based Microstrip Patch Antenna Structure
Abstract: Here the effect of various dielectrics on the performance of microstrip patch antenna with underlying electromagnetic bandgap structure is investigated. This unique antenna structure suppresses the surface waves and reflects plane waves with no phase change and thus acts as a perfect magnetic conductor (PMC). Dielectric losses are reduced due to the presence of EBG structure and bandwidth enhancement is observed when compared to the non-EBG structure. The effect of …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 13–18 Read article
-
Bandwidth and Return Loss Enhancement in Patch Antenna by Meta Material using at 2.62 GHz
Abstract: In this work, a rectangular micro strip patch antenna (RMPA) loaded with “Symmetric square Shapes Four Segments with circular rings structure” metamaterial structure is designed at a height 3.2 mm from ground plane by using CST-MWS software. The resonance frequency of the designed antenna is 2.62 GHz. The 10 dB impedance bandwidth of proposed antenna is increased up to 78.3 MHz. The return loss of the proposed antenna reduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 33–37 Read article
-
Compact Circularly Polarized Patch Antenna with U-Slot and Defected Ground
Abstract: A compact single-feed circularly polarized (CP) patch antenna at L-band is designed. The antenna contains a U-slot and is designed with DGS technique to reduce the size of antenna. With the presence of the U-slot, the antenna fabricated on a high-dielectric-constant (10.2) substrate achieves a reasonable axial-ratio bandwidth. The operating frequency is 1.521 GHz. The measured gain is 2.5 dBi, and bandwidth is 86.8 MHz.
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 16–20 Read article
-
Performance Analysis of Proximity Coupled Microstrip Patch Antenna with DGS and EBG
Abstract: The objective of this paper is to analyze the effect of Defected Ground Structure (DGS) in a Proximity Coupled Microstrip Patch Antenna (PCMA) and the effectiveness of using this structure in a PCMA with an Electromagnetic Bandgap Structure (EBG). The EBG structure used is a metallo-dielectric structure having a printed metallization with connected via ground plane. This manoeuvering of EBG enabled PCMA with a dumbbell shaped DGS results in a …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 1–8 Read article
-
Performance Analysis of Rectangular Patch Antenna with EBG using Quarter Wave Feed Line and Coaxial Feed Line Methods for C-Band Radar Based Applications
Abstract: Microstrip antenna has various attractive features like light weight, low cost, easy fabrication, etc. Microstrip antenna can be fed in a variety of ways. This paper is focused on the enhancement of gain of the rectangular patch antenna with electromagnetic band gap structures at 7.5 GHZ for two different feeds and compares their results. The two types of feeds are coaxial line feed and quarter wave feed. Antenna design has …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 19–25 Read article
-
Plus Slotted Circular Patch Antenna for WiMax/WLAN Applications
Abstract: A wideband compact circular patch microstrip antenna is presented for various wireless systems such as WLAN and WiMax applications. The proposed antenna has been fabricated and the return loss bandwidth is measured. The simulated and measured antenna such as return loss, bandwidth and gain are presented. The Experimental result shows that the proposed antenna presents a bandwidth of 78.81% with the maximum gain of 6.2 dBi.
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 38–43 Read article
-
Co-planar Waveguide Circular Ring Microstrip Patch Antenna for WLAN Applications
Abstract: AbstractA printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane has been proposed. Four rectangles of dimensions 4.8mm x3mm are arranged in such a manner to achieve both the WLAN frequency band. The bandwidths of 341MHz and 414MHz are achieved having a resonant frequency of 2.37GHz and 5.45GHz respectively. This antenna is printed on the glass epoxy (FR4 lossy) of dielectric substrate …
Published in Journal of Communication Engineering & Systems · Vol. 6, Issue 3, 2016 · pp. 1–6 Read article
-
Frozen Waves: Double T-Shape Patch Antenna Sensor for Precise Ice and Snow Measurement
Abstract: To design a Micro strip patch antenna with double T shaped slots at operating frequency 2.4GHz was developed for ice detection and measurement application. Detection was performed by monitoring the resonance frequency and amplitude of the transmission coefficient between the antenna sensor and a broadband receiver. The patch antenna sensor is also capable of distinguishing between ice and water, respectively when compared to the bare sensor. The antenna was also …
Published in Journal of Control & Instrumentation · Vol. 14, Issue 3, 2023 · pp. 15–20 Read article
-
Millimeter Wave Slotted Microstrip Patch Antenna for Next Generation 5G Communication
Abstract: Abstract: In this paper, a printed microstrip patch antenna is analyzed for lower band 5G technology. The proposed printed Microstrip patch antenna has a compressed structure having dimension 20 × 20 × 1.6 mm3 with the conducting ground plane and this antenna is well suited for the use in handheld next generation 5G devices. Modified antenna resonated at lower band of 5G communication technology. In this research work geometry of …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 25–30 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Effect of Partial Ground Plane on the Microstrip Patch Antenna Performance for Wireless Sensor Networks
Abstract: Wireless sensor networks have a number of tiny nodes. Each node has the ability to communicate with its neighbors. The communication range depends on the type of antenna used. This paper analyzes the performance of microstrip patch antenna which suppresses the surface waves from the edges of the ground-plane of the substrate. The microstrip patch antenna is designed using a substrate of dielectric constant εr = 2.2 and loss tangent …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 3, 2013 · pp. 5–9 Read article
-
Split Ring Resonator Based Dual Frequency Microstrip Patch Antenna For Wireless Applications
Abstract: The objective of the work is to design a compact dual frequency microstrip antenna (MSA) at GSM 1800 MHz and ISM (2.4 GHz). The proposed MSA incorporates a rectangular patch with an inverted U slot printed on the top of RT duroid 5880 substrate with thickness of 0.8mm and dielectric constant of 2.2. The dimensions of the patch are optimized as 45x 54 mm2. It is fed by coaxial feeding. …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 1–14 Read article
-
Patch Antenna by using Tunable Metamaterial for Dual Band Application
Abstract: AbstractIn this paper, a novel compact microstrip antenna, designed on FR4 substrate, is proposed. Here, a compact Square patch antenna is designed in such a way that a layer of metal between the patch load and the radiating patch moreover, the ground which makes the antenna operate at a lower frequency and antenna at 2.418 GHz with the directivity and gain is 6.58 6dB and 2.935dB. The Tunable metamaterial is …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 20–24 Read article
-
Design and Analysis of I-Slotted Rectangular Microstrip Patch Antenna for Wireless Application
Abstract: AbstractThis paper presents a novel design of an I-slotted patch antenna with compact nature and the study of various antenna parameters. The antenna is fed by the inset-feeding technique. The proposed patch antenna is designed and simulated on IE3D simulation software (Zeland program manager 9.0). The main aim of the proposed work is to design a large-bandwidth antenna with compact size. The proposed microstrip antenna has a wide bandwidth covering …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 3, 2013 · pp. 36–40 Read article
-
Rectangular Patch Antenna with Dual and Triple-band using Complementary Split ring Resonator (CSRR)
Abstract: This paper presents the idea of a Complementary Split Ring Resonator (CSRR)-based multiband microstrip patch antenna. By etching the CSRR in the ground plane of the conventional rectangular patch antenna, several bands are obtained, thereby miniaturizing the conventional antenna. This article examined and contrasted the results of the microstrip antenna with two, four and six CSRR inclusions. Because of the quasi-static resonance properties of the complementary split square resonators, the …
Published in Trends in Electrical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–6 Read article
-
Design of Rectangular Microstrip Patch Antenna for WBAN Application
Abstract: AbstractThis paper presents a microstrip patch antenna with frequency of 2.47 GHz with substrate of FR4 Epoxy with relative permittivity of 4.4. Due to very low cost and excellent mechanical properties it is ideal for wide range of electronic component applications. Here we have cut four rectangular corners on the patch. We have first cut one corner then we found the return loss as -15.6db and gain as 5.679.To improve …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 25–33 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
The Design and Analysis of a High Bandwidth Patch Antenna Loaded with Double-L shaped Parasitic and Super-Strate Components
Abstract: A patch antenna having parasitic components in the shape of a double-L. It is shown how to make a directional slot antenna using a parasitic patch and a windowed superstrate. The recommended antenna may readily obtain high-gain properties due to its composition. The suggested antenna's impedance bandwidth has been measured. Internet of Things (IoT) apps to make their data more accessible, wireless communication technology integration is required. This work proposes …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 1–13 Read article
-
Analysis of N-Slot Loaded Patch Antenna for Tripple Band Operation
Abstract: ABSTRACT In this paper, the analysis of N-slot loaded microstrip antenna having single and double dielectric layer with coaxial feeding is presented using circuit model analysis. The antenna gives triple resonance and the separation between these resonances depends on the dimension of the slot. This antenna gives wide bandwidth for all three resonant frequencies for single dielectric and gives four bandwidths for double dielectric layer. It is observed that the …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 3, 2012 · pp. 11–19 Read article
-
A CPW Fed Inverted E-Shape Microstrip Patch Antenna for Multi Band Applications
Abstract: In this paper a CPW fed multi band monopole antenna with inverted E-shape micro strip patch is presented for radar/satellite applications. Ansys soft HFSS simulator is used to simulate the antenna in this paper. The proposed antenna consists of inverted E shape patch including finite ground CPW feeding. The antenna is fabricated on 1.5 mm FR4 substrate which has dielectric constant of 4.4 and loss tangent of 0.02. The operating …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 26–35 Read article