Search
148 articles for “MPa”
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Mechanical Properties Investigation of Green Waste Composite Material
Abstract: Widespread accessibility and abundance of natural fibres are driving forces behind renewed focus on eco-friendly solutions. Researchers have recently begun to focus on natural fibres as reinforcement due to their many advantages over more conventional materials. Natural fibre is an attractive ecological and biodegradable alternative to most common glass fibre, synthetic reinforcement, because of its high specific and low cost mechanical capabilities. India is home to a wealth of untapped …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 28–36 Read article
-
Effect of hybridization on mechanical Characteristics of hemp,bamboo and jute reinforced epoxy bio composites
Abstract: In the present study, hemp, jute and bamboo fibres have been reinforced with epoxy resin to develop several bio-composites (hemp/epoxy, jute/epoxy, bamboo/epoxy, hemp/jute/epoxy, hemp, bamboo, epoxy and hemp/jute/bamboo/epoxy). Their mechanical characteristics (impact strength, flexural strength, and tensile strength) have been evaluated by conducting standardized ASTM tests on the fabricated bio-composite specimens. Among these, the hybrid epoxy composite reinforced with hemp, jute, and bamboo fibers has exhibited superior tensile and impact …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 81–91 Read article
-
Effect of Compressive Strength of Core and Precast Concrete on the Behavior of Column Retrofitted by Precast Segment and FRP Wrapping - A Finite Element Study
Abstract: In the present investigation the effect of compressive strength of core and precast concrete on the behavior of columns retrofitted by attaching precast segments and followed by FRP wrapping through Finite Element Analysis. A rectangular column converted into an elliptical column by attaching precast segment is modeled using ANSYS workbench, A Finite Element Analysis software. A Finite Element Model is developed, considering various structural parameters such as grades of core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 302–310 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Biochar-Filled Soy Protein Composites: Evaluating Thermal and Mechanical Properties for Sustainable Polymer Applications
Abstract: The growing demand for environmentally sustainable and biodegradable materials has intensified interest in alternative solutions for thermal insulation. This study explores the development of composite materials using mango seed shell biochar (MSSB) and soy protein isolate (SPI) as a biodegradable matrix-filler system. Mango seed shells, an abundant agro-industrial waste, were subjected to pyrolysis at 500°C for 2 hours to produce biochar. The resulting MSSB was incorporated into SPI with glycerol …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 60–71 Read article
-
ANN Approach to Forecasting the Strength of Nano Silica Incorporated Geopolymer Composite
Abstract: Coal and steel industry by-products, such as fly ash (FA) and blast furnace slag (GGBS), have gained significant attention as precursors for geopolymer concrete (GPC) due to their high aluminosilicate content, offering a sustainable alternative to conventional cement. Nano silica (NS), recognized for its exceptional pozzolanic activity and ability to refine microstructure, has shown potential to enhance the mechanical and durability properties of GPC. This study investigates the influence of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 267–278 Read article
-
Impact of Layer Height and Infill Line Orientation On 3D Printed Components Produced Via Additive Manufacturing
Abstract: Additive Manufacturing (AM) is an extrusion-based technique used to create objects by extruding semi-molten material through a nozzle of specific dimensions. Materials like acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polycarbonate (PC), and others are commonly employed in this process to manufacture industrial components. The mechanical properties of engineering component are critical for various industrial applications. This study investigates the impact of additive manufacturing on fabrication, considering different process parameters. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 315–323 Read article
-
Physical and Mechanical Properties of GGBS Based Geopolymer Concrete with the Inclusion of Metakaolin
Abstract: The use of ecologically friendly materials in the production of concrete is a significant and pertinent development in the global movement for sustainable construction. Geopolymer concrete (GPC) has gained popularity as an alternative to conventional Portland cement (OPC)-based concrete due to its utilisation of ground granulated blast furnace slag (GGBS), fly ash, and metakaolin, among other industrial by-products. The production of geopolymer concrete addresses serious environmental problems and contributes to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 261–266 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Characterization of Bamboo-Fiber Reinforced Geopolymer Composites
Abstract: In this project, we plan to produce and assess a new, eco-friendly composite made from geopolymer (from a combination of fly ash and GGBFS), strengthened with chemically treated bamboo fibres for retrofitting earthquake-resistant buildings. Geopolymer is produced by activating a mixture of fly ash and GGBFS with sodium silicate and sodium hydroxide solutions. We have produced and analyzed bamboo fibre-reinforced geopolymer composites as potential materials for seismic retrofitting of structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1007–1025 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Effect of Thermal Conditions on Microstructure and Mechanical Properties of AA5083 Processed by Equal Channel Angular Pressing
Abstract: A commercial AA5083 with an initial grain size of 210 μm was given an ultrafine-grained structure using the equal channel angular pressing (ECAP) technique under die design as patented. The identical sample underwent two successful passes through the die at 473 K, with each passage causing the sample to rotate 90° along its own longitudinal axis. After just one pressing, the microstructure was comparatively homogeneous. It was made up of …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 49–64 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Structural Performance Evaluation of Circular Perforated Plates under Mechanical Loading
Abstract: Circular perforated plates are structurally critical components in aerospace, automotive, and marine sectors, where perforation-induced stress concentrations govern failure under mechanical loading. This study conducts a systematic finite element analysis of stress distribution, deformation, and interlaminar behavior in aluminum and glass-epoxy laminates ([−45/45/90/0]S and [−45/45/90/0]AS) under uniform transverse pressure with clamped-free boundary conditions. Four perforation configurations—no hole, central hole, single-series, and 25-hole grid—were evaluated using ANSYS Shell-181, verified against Kirchhoff–Love, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 1–20 Read article