Search
308 articles for “Joints”
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
STRUCTURAL BEHAVIOR OF FLEXIBLE AND SEMI-RIGID BEAM-COLUMN JOINT CONNECTIONS BY FEM
Abstract: This study investigates the structural behavior of flexible and semi-rigid beam-column joint connections in cold-formed steel (CFS) structures, focusing on the use of Finite Element Modeling (FEM) to simulate their performance under various loading conditions. Traditional analysis methods often oversimplify beam-column connections, treating them as either perfectly rigid or fully flexible, which does not accurately capture real-world joint behavior. In reality, many beam-column joints exhibit semi-rigid characteristics, where the stiffness …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Prediction of Bead Geometry Parameters using Response Surface Methodology and Finite Element Analysis of Gas Metal Arc Welded Joints of Aluminum Alloy
Abstract: Gas Metal Arc welding process aims to produce welded joint with the excellent mechanical properties with minimum distortion and desired weld bead parameters. In welding, input process parameters decides the quality of weld joint. Manufacturer are facing problem of controlling the process input parameters to obtain a good welded joint with the bead geometry. Prediction of weld bead geometry play very important role in determining the quality of weld. This …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 23–35 Read article
-
Comparison of PQR and WPQ for Jacket Long Seam Joint of Pressure Vessel as per ASME Section IX
Abstract: Small and medium size stocked components intended for boiler and pressure vessel are often manufactured and welded with reference to ASME section III and IX. This paper mainly focuses on rules for welding qualification, monitoring welding activities during manufacturing and the extent of supervision by independent inspection body required by the quality system. In this work comparison required for welder procedure qualification as well as welder qualification accordance with procedure …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 1–5 Read article
-
Two-dimensional Finite Element Analysis of Bolted Flanged Joints
Abstract: A 2D axisymmetric finite element analysis of flanges has been carried out using ANSYS 7.1 version. The analysis consider gasket as a rigid material for contact analysis and the others where the gasket has been considered as a gasket element. The non-linear behaviour with two unloading curves was used to predict the non-linear behaviour. This paper attempts to study and compare the contact pressure, gap, gasket stress and gasket total …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 60–65 Read article
-
Combined Effect of Welding Speed and Tool Pin Profiles on Tensile properties of FSWAA6061-T6 Joint
Abstract: Friction stir welding is a solid state welding process for joining two similar and dissimilar materials, in which non-consumable tool with rotary motion along with transverse motion with intimate contact to weld coupon generates sound joint. In this study, tool rotation speed, tool travel speed and tool pin profile are taken to know their effect on mechanical properties of AA6061-T6. The main objective for this research is to evaluate the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 24–31 Read article
-
Recent Progress in Addressing Temporomandibular Joint Ankylosis
Abstract: TMJ ankylosis refers to the fusion of the mandibular condyle with the skull's base. Managing this condition is a formidable task due to technical complexities and a high recurrence rate.[1] Addressing temporomandibular ankylosis is a complex endeavor often resulting in reankylosis, relapse, risky complications, and necessitating multiple surgeries. This article introduces a treatment protocol for managing temporomandibular joint ankylosis, emphasizing early intervention using modern treatment approaches." Temporomandibular joint (TMJ) ankylosis …
Published in Research and Reviews : Journal of Surgery · Vol. 12, Issue 2, 2023 Read article
-
Computer Vision Algorithm for Surface Defects Identification in TIG Welded Joints
Abstract: Quality monitoring of welded joints is still quite a tedious job for many industries. The surface defects on welded joints arises from the improper selection of various input parameters which further result bad quality weld. This paper highlight the application of a computer vision algorithm called discrete Fourier transformation approach for identification of surface defects present on TIG welded joints.
Published in Research and Reviews : Journal of Computational Biology Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium
Abstract: Friction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and magnesium. These metals, renowned for their exceptional properties such as ductility, thermal conductivity, low density, and impressive weight-to-strength ratios, find wide utility across numerous industrial sectors. However, traditional fusion welding methods often struggle to effectively join aluminum and magnesium due to their disparate physical and chemical characteristics. FSW …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 134–142 Read article
-
Fracture Mechanics-based Assessment of Welded Joints in Structural Steel Components
Abstract: In many engineering applications, connection by welding are essential to the structural integrity of steel components. However, because of the intricate interplay between material qualities, welding techniques, and structural stress conditions, evaluating the dependability and safety of these welded connections continues to be a difficult challenge. A systematic framework that evaluates the behavior of cracks and faults in welded joints is provided by fracture mechanics, which also offers insights into …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 16–22 Read article
-
An Observational Study on Prevalence and Risk Factors for OA Knee Joint Among Adult Population Attending the SCSP Camps in Chennai, Tamil Nadu, India
Abstract: Background: Osteoarthritis (OA) is a prevalent degenerative condition affecting older individuals, particularly in developing nations. It is commonly linked to aging and various intricate underlying causes. The complex causes of osteoarthritis include confounding factors that significantly increase the risk of its development, many of which can be managed or prevented. Among all joints, knee osteoarthritis is particularly prevalent, especially in women. In rural India, the SC/ST population faces significant health …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 12, Issue 1, 2025 · pp. 9–17 Read article
-
Evaluation on the Mechanical Strength of TIG Welded 6061Aluminium Alloy Joints
Abstract: Aluminum alloy Al-6061 is extensively used in aerospace, automotive, and marine industries due to its excellent mechanical properties, lightweight nature, and corrosion resistance. However, welding this alloy presents challenges such as porosity, hot cracking, and strength reduction in the heat-affected zone (HAZ). Tungsten Inert Gas (TIG) welding, known for its precision and quality, is commonly employed for joining Al-6061. This study investigates the tensile strength of TIG-welded butt joints of …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 34–39 Read article
-
Characterisation of FSW Joints of Aluminium and Titanium Alloys: A Review
Abstract: AbstractThis paper presents a review on friction stir welding of different aluminum and titanium alloys. Aluminum alloys are most widely used in automotive, aerospace and ship building industries as high strength-to-weight ratio materials. Titanium alloys are also attractive in these fields due to their high specific strength and good corrosion resistance. In some special applications, the complementary characteristics of Ti and Al are required, such as increased strength, low weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 25–29 Read article
-
Review on Corrosion of Welded Joints
Abstract: Corrosion is one of the major problems generally faced by welded joints made from various welding processes. Welding resistance of welded joints can be improved with addition of anticorrosive elements in the base metal. However certain other factors like fabrication technique, welding practice, welding sequence, moisture contamination, organic or inorganic chemical species oxide film and scale, weld slag and spatter, incomplete weld penetration or fusion also contribute for corrosion of …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 23–30 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article
-
Analysis of Steel Beam Column Joint by Using Cantilever Weight by using ANSYS
Abstract: The steel beam column joint is ideally pinned, semi rigid or fully rigid. As per previous study the semi rigid connections are subjected to moment rotation relationship joint of structure and the behavior of beam column joints in steel frames can be represented by its cantilever weight behavior which is primarily shown by the moment rotation relationship. During the past decade, extensive research has been conducted on the analysis and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 23–29 Read article
-
Nonlinear Finite Element Analysis of Reinforced Concrete Exterior Beam Column Joint Subjected to Monotonic Loading
Abstract: A numerical analysis of exterior beam-column joint subjected to constant axial load on the column top and monotonic load applied at the beam tip is presented in this work. A strain-based nonlinear finite element program is developed in MATLAB R2009a. The nonlinear analysis of reinforced concrete structural member is carried out considering it as a two-phase system. The concrete in nonlinear range is considered as orthotropic material having different stress-strain …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 12–21 Read article