Search
45 articles for “Carbon-epoxy”
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Next-Generation Lightweight Nanocomposite Structures for Electric Mobility
Abstract: The rapid expansion of the electric vehicle (EV) sector has intensified the demand for battery enclosures that are lightweight, mechanically strong, thermally stable, and environmentally sustainable. This research focuses on the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed material system integrates carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in improved mechanical strength, enhanced thermal stability, and superior …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1147–1156 Read article
-
Lightweight Composite Materials for Electric Vehicles (EVs) and Public and Private Transport
Abstract: The rapid expansion of the electric vehicle (EV) industry has intensified the demand for battery enclosures that are lightweight, durable, thermally stable, and environmentally sustainable. This study investigates the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed composite system combines carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in superior mechanical strength, enhanced thermal stability, and excellent flame retardancy.A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 470–481 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Experimental Exploration of Crack and Damage Dynamics of Hybrid FRP Nano Composites
Abstract: Fiber-reinforced polymer (FRP) composites have become essential materials in modern engineering structures because of their excellent strength-to-weight ratio, corrosion resistance, and adaptability in design. Among different fracture modes, Mode I interlaminar fracture where cracks propagate under tensile opening stresses is one of the most critical forms of damage in layered composites. Since delamination occurs within the matrix-rich regions between plies, improving the matrix properties plays a key role in enhancing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 220–232 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Design and Computational Analysis of Hybrid Carbon Fiber-Enhanced Metal Matrix Composite Spur Gears
Abstract: The automobile industry has to find the alternative solution for steel grade gears to overcome the weight to high strength ratio and thermal consideration with high damping properties. This study describes the design, FEM analysis, and performance evaluation of three new hybrid composite spur gears: a monolithic carbon fiber/epoxy (80/20 weight percent) composite (A), and two hybrids with steel (B) and aluminum (C) matrices (64% CF, 21% Epoxy, 15% metal). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 158–172 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Design and Development of Lightweight Polymer Composite Manifold Using CF-ABS and GFRP for Aerodynamic Energy Recovery in Electric Vehicles
Abstract: Electric vehicles provide a number of advantages over conventional fuel vehicles due to their low to no emissions. High energy efficiency improves the driving performance of Electric vehicles. However, they have to face certain challenges such as the high purchase cost of batteries and lack of battery charging facilities. The major drawback of an Electric vehicle is to store sufficient energy to run the vehicle for a long time. This …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article