Search
125 articles for “Aluminum”
-
An Experimental Investigation of Process Parameters for Aluminum Alloy Composites
Abstract: The objectives of this work are to develop an aluminum alloy composites and investigate machining process parameters effect on the tool wear rate for composites. The composite is enhanced using silicon carbide and graphite. The composite is made by a method called stir casting. Furthermore, it is investigated both mathematically and experimentally. This study takes trial on aluminum alloy composite to see output characteristics tool wear rate are affected by …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 185–193 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
Abstract: Aluminum are frequently used as light weight structure in various nautical design. One of them is the ship structure design where sever environment of saline water influences the damage of the structure and one among them is pitting. In this paper, an experimental verification of strength and impact of corrosion effect on Al-6063–T6 aluminum was presented. The specimens were exposed to saline water for various duration like 500 hrs, 750 …
Published in Journal of Experimental & Applied Mechanics Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Improvement of Geometric Tolerances and Mechanical Properties of Aluminum Hybrid Metal Matrix Composites
Abstract: In the field of metal matrix composite materials, there has been a generous thrust towards the development of electrical discharge machining (EDM). In this study, stir casted aluminum hybrid metal matrix composites were successfully machined using EDM by analyzing the input process parameters namely, pulse-on time, peak current, and gap voltage using L27 orthogonal array. The ideal conditions for various output responses such as material removal rate, circularity, and radial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1583–1592 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
In vivo Modulatory Effect of Clerodendrum Splendens (Glory Blossom) in Aluminum Induced Alzheimer Diseases and Lonchocarpus Sericeus in Rotenone Induced Parkinson’s Disease on Na+/K+ Atpase (Sodium Pump) in the Cerebral Tissues of Male Albino Wister Rats
Abstract: Elegant research has shown that plants are useful for both curative and preventive purpose on the humans populous. Prevalent among diseases associated with humans are neurological diseases which affect a large sector of the population especially the elderly. The most common neurological diseases are Parkinson and Alzheimer disease which affect a large sector of the brain and also cause an imbalance in brain electrolyte. Among such electrolytic mechanisms of the …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 1, Issue 2, 2023 · pp. 31–36 Read article
-
Composite Solutions for Sustainable Mobility: Aluminum Alloy, Carbon Fiber, and Graphene in Chassis Frame Design
Abstract: This study describes the design and analysis of a chassis frame made of carbon fibre, graphene, and aluminium alloy composite materials. A frame must be able to sustain vibration, shocks, and bending and torsional pressures. This piece of work uses a rectangular cross-sectional area to design a frame. After that, the simulated chassis is taken for investigation using composite materials such as aluminium alloy and carbon fibre reinforced with graphene. …
Published in International Journal of Solid State Innovations & Research · Vol. 1, Issue 2, 2023 · pp. 1–7 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Techno-economic Assessment of a Domestic Refrigerator with Aluminium-based Suction Line and Capillary Tube
Abstract: The present work reports the experimental performance evaluation of aluminum suction line-based domestic refrigerators. Furthermore, it compared domestic refrigerators with conventional copper capillary tubes and suction lines using R600a as a refrigerant. Performance parameters: energy consumption, ice-making time, and pull-down time was reduced significantly compared to conventional copper suction and capillary tube. Refrigerants having Ambient temperature for ice making test and pull down were initially set at 43°C and that …
Published in Journal of Polymer & Composites Read article
-
A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium
Abstract: Friction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and magnesium. These metals, renowned for their exceptional properties such as ductility, thermal conductivity, low density, and impressive weight-to-strength ratios, find wide utility across numerous industrial sectors. However, traditional fusion welding methods often struggle to effectively join aluminum and magnesium due to their disparate physical and chemical characteristics. FSW …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 134–142 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
Comparative Analysis of Conventional Formwork with Specialized Emerging Formwork Regarding Project Engineering Factors for High-rise Building
Abstract: Today, because of globalization, there have been a number of improvements in the construction of modern technology worldwide, as a result of the quick and reliable distribution of new and emerging technologies through societies worldwide and the cross-border information sharing. Shaping which helps to mount the concrete in the desired shape It is a critical component of the construction to support the loads placed on it, as well as supporting …
Published in Recent Trends in Civil Engineering & Technology Read article
-
Review in Friction Stud Welding of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Finite Element Analysis of Spur Gear Manufactured of Al7475-SiC Composites
Abstract: The spur gear is used in power transmission systems in industrial and automotive sectors. But sometimes, these gears have problems with their teeth due to excessive stress and wear. Some gears don't work as well, so in the present work better material is used to make them work well. Composite materials, which is known for their optimal strength-to-weight ratio and weight reduction benefits. So, these materials are considered substitutes for …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 279–284 Read article
-
Fabrication and Mechanical Characterization of Hybrid Metal Matrix Composite Castings
Abstract: This work investigates and addresses the casting of a novel hybrid composite material with tungsten carbide and aluminum-silicate particles mixed at varying weight fraction rates. Production of hybrid composite has some advantages if it is processed by near net shape techniques. The simplest method for dealing with this hybrid composite is the turbulence produced by the vortex agitating technique. The vortex mixing method is used in this study to create …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 32–38 Read article
-
Advancements In Al6061 Metal Matrix Composites: The Role of SiC, Al₂O₃, and Graphite Reinforcements in Enhancing Properties and Applications
Abstract: Al6061-based metal matrix composites (MMCs) reinforced with silicon carbide (SiC), graphite (Gr), and aluminum oxide (Al₂O₃) exhibit a unique combination of mechanical, thermal, and tribological properties, making them highly suitable for advanced engineering applications. SiC enhances hardness, wear resistance, and load-bearing capacity, while Al₂O₃ improves thermal stability and mechanical strength. Graphite provides self-lubricating properties, reduces friction, and lowers the composite's density, improving fatigue resistance. The synergy of combining these reinforcements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 90–98 Read article
-
Comparative Review of Innovations in Self-Compacting Concrete (SCC) Technologies
Abstract: Self-compacting concrete (SCC) is a revolutionary material in contemporary construction, with better workability and lower labor requirements without any sacrifice in strength or durability. The latest advances have been in terms of furthering its environmental and performance attributes by using different materials and methods. One of them is substituting ordinary Portland cement with high-volume fly ash and calcined calcium carbonate (BCC), cutting CO₂ emissions by as much as possible while …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 99–103 Read article