Search
428 articles for “tensile”
-
AL6061/Al2O3-Ash Reinforced Composites: An Experimental and Statistical Study Using Ultrasonic Stir Casting
Abstract: This study presents an experimental investigation on the influence of fly ash particle size on the mechanical properties of aluminum alloy (Al6061) composites fabricated through Ultrasonic Assisted Stir Casting. Fly ash, a low-cost and low-density by-product of thermal power plants, has emerged as an effective reinforcement material due to its excellent fluidity, high filling capability, and ease of processing. It has been increasingly utilized in metal, polymer, and rubber composites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1123–1133 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Advancing Pavement Durability and Sustainability through Glass Fiber Reinforced Concrete Technology
Abstract: This research evaluates the application of Glass Fiber Reinforced Concrete (GFRC) for improving road pavement durability and sustainability. The primary objective was to ascertain the optimal glass fiber content that enhances pavement performance while maintaining economic feasibility. To achieve this, experimental investigations compared the mechanical properties of GFRC to traditional Portland Cement Concrete (PCC). The experiments focused on key performance metrics such as tensile, compressive, and flexural strengths, with GFRC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 760–774 Read article
-
Exploring the Impact of Process Parameters on 3D Printing: A Comprehensive Review for Enhanced Product Quality
Abstract: Rapid developments in 3D printing technology have dramatically changed a wide range of industries, from consumer products and healthcare to automotive and aerospace. 3D printing is a process of manufacturing where material is deposited layer over layer which are previously deposited to provide the design shape to the desired products. This process has eliminated the numerous machining processes which were required to manufacture the products previously. The modification of process …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 975–996 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Characterization of Bamboo-Fiber Reinforced Geopolymer Composites
Abstract: In this project, we plan to produce and assess a new, eco-friendly composite made from geopolymer (from a combination of fly ash and GGBFS), strengthened with chemically treated bamboo fibres for retrofitting earthquake-resistant buildings. Geopolymer is produced by activating a mixture of fly ash and GGBFS with sodium silicate and sodium hydroxide solutions. We have produced and analyzed bamboo fibre-reinforced geopolymer composites as potential materials for seismic retrofitting of structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1007–1025 Read article
-
Comprehensive Review of Composite Materials: Classification, Manufacturing Methods, Mechanical Behavior, Failure Modes, and Emerging Applications
Abstract: Composite materials have emerged as one of the most significant classes of engineered materials due to their ability to deliver high strength to weight ratios, enhanced durability, and tailored multifunctionality. Over the past two decades, rapid progress in polymer chemistry, advanced reinforcement architectures, additive manufacturing, and automated fabrication has expanded the applicability of composites across aerospace, automotive, biomedical, civil, and renewable energy sectors. This paper provides a comprehensive review of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 923–939 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Eco-Sustainable Walnut–Hemp Reinforced Composites for Automotive Brake Applications
Abstract: The search for natural fiber-reinforced composites that can be used instead of manmade materials has been sparked by the growing need for eco-friendly materials in car brake systems. The study looks at three types of Walnut–Hemp Reinforced Friction Composites (WFRCs): WFRC-1, which is 10% walnut and 20% hemp; WFRC-2, which is 15% walnut and 15% hemp; and WFRC-3, which is 20% walnut and 10% hemp. Aspects like tensile strength, compressive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 439–448 Read article
-
Advances in Nanocellulose-Enhanced Polymers and Composites: Structure, Performance, and Applications
Abstract: The most common biopolymer is cellulose, which can be converted into nanocellulose (NC) the sustainable nanomaterial possessing the outstanding characteristic of biodegradability, renewability, low density, high aspect ratio, and excellent mechanical performance. Such distinctive features make NC a promising filler in polymer and composite systems. Recent developments in the preparation of nanocellulose using various natural and artificial sources have facilitated scalable production processes that have less energy requirements and are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1610–1623 Read article
-
Assessment of Hygiene Degradation and Expiry Indicators in Household Bedding Products
Abstract: Household bedding products such as pillows, bedsheets, blankets, and mattresses play a crucial role in ensuring comfort, sleep quality, and overall health. However, prolonged use without timely replacement or proper maintenance can result in hygiene degradation, leading to the accumulation of dust, allergens, microorganisms, and chemical wear. This study aims to assess the factors contributing to hygiene decline and to identify reliable indicators of expiry for common bedding items. The …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 1, 2026 · pp. 33–47 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article