Search
600 articles for “CERT-In”
-
Graphene for Next Generation Green Electronics-A Sustainable Future
Abstract: The amount of e-waste or electronic waste is increasing worldwide due to the rapid development of the electronics industry and the profound usage of electronic products although it has enormous detrimental effects on the environment and humans. It has become an evolving problem due to a lack of knowledge and infrastructure for e-waste disposal and recovery. Researchers around the world are in search of environment-friendly, sustainable ‘green electronic’ material which …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 12, Issue 3, 2022 · pp. 35–41 Read article
-
A Study on Stabilization of Expansive Soil with Ground Granulated Blast Furnace Slag and Sodium Silicate
Abstract: Utilization of industrial waste materials in the improvement of soils is a cost efficient and environmental friendly method. Stabilization of the expansive soil is studied by using Ground Granulated Blast Furnace Slag (GGBS) and sodium silicate. This paper includes the evaluation of soil properties like compaction, unconfined compressive strength test and California Bearing Ratio (CBR) test. Detailed experimental study has been undertaken to investigate the characteristics and behavior of expansive …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 9–16 Read article
-
SYMMETRY AND ASYMMETRY MODEL FOR THERMAL CONDUCTIVITY IN POROUS MEDIA
Abstract: This paper focuses on determining thermal conductivity in porous media using symmetry and asymmetry models. Since porous media are not uniform and homogeneous in most of the cases, anisotropy must be taken into account, what derives in the application of an asymmetry model as thermal gradients are not equal in all directions. The paper demonstrates that, under certain conditions, isotropic conditions, therefore, symmetry model can be applied to non-homogeneous or …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 2, 2020 · pp. 38–51 Read article
-
Experimental Investigation of Different Type of Soils with Addition of Geofibers
Abstract: Strength is important factor for stability of structure tо meet sрeсified engineering requirements оf sоil аnd to mаke it mоre stаble. For this purpose, certain engineering рrорerties are required tо be altered/changed. Based on the literature available, In the present study, аn exрerimentаl investigation is undertаken tо investigаte the effeсt оf addition of geofibers in different proportions (0.0-2.0% by weight) with two fiber lengths of 6 mm and 12 mm …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 2, 2021 · pp. 13–20 Read article
-
Evaluate Variations of Deflections of Fixed Headed Pile from Non-Linear Load - Deflection Curve under Lateral Loading
Abstract: Lateral stability is the vital issue when the pile stands in several soft clay either sand layers. In reality, structure and soil both are show non-linear behaviors. Proper evaluation of non-linear behavior has not so essay in theory. However, slight non-linear effects are included in pile deflection from load-deflection curve of pressuremeter test in laboratory. Pressuremeter modulus is influenced deflection of fixed headed piles. Predicting the variations of non-linear load …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 45–52 Read article
-
A study to investigate the shear strength resistance of Ennore sand from conventional direct shear test.
Abstract: In this article analysis of shear strength parameters of Ennore Sand is given using the direct shear test. The shear strength parameters of cohesion and angle of shearing resistance are employed in the construction of geotechnical constructions to describe the soil's ability to sustain shear stress when subjected to a certain load. These might be measured using laboratory or field testing. When shearing a sample in a direct shear apparatus, …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 3, 2022 · pp. 19–26 Read article
-
Small-Scale Model Study on the Load-Deflection Characteristics of Single Piles under Static Lateral Load
Abstract: The capacity of a certain mathematical model to mimic a behavior occurring on a larger scale often concerns engineers. To evaluate a particular structure's safety factor, model uncertainty is an important consideration. Piles have been widely used to support axial and lateral loads for a wide range of structures, including high-rise buildings, transmission towers, power plants, offshore structures, highway and railway structures. Many transmission towers, high-rise buildings, highway and railway …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 3, 2022 · pp. 47–55 Read article
-
Environment Degradation and Disaster Management in Gilgit-Baltistan
Abstract: The mountainous region of Gilgit-Baltistan (GB) has been impacted by excessive natural and human-induced hazards like landslides, earthquakes, floods, avalanches and rock falls etc. Weak institutions coupled with climate/environmental changes are some of the factors increasing vulnerability of communities living in GB. In this paper, an attempt has been made to highlight the increased vulnerability of GB to various disasters due to phenomenon of climate/environmental change and recommended a methodology …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 1, 2015 · pp. 5–12 Read article
-
Kill Corruption and Build Construction: A Review of Corrupt Practices
Abstract: Over the years, construction projects are perpetually described as complex in both nature and management which suggest possibilities of being significantly characterized by corrupt policies and procedures resulting into monumental wastages. Prevailing challenges in the sector reveal that both the client representatives and the contractors compromised at every level of a well-defined project. Activities in certain cultural circles, which might be regarded as essential for getting the job done, and …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 3, 2015 · pp. 1–11 Read article
-
Reducing the Uncertainty of Marine Accidents Failure Rate in Harsh Environment; Using Bayesian Theory
Abstract: The interest in arctic activities is strong, but has not led to significant quantifying analysis over the fact of finding rescannable failure rate. To attract investors and promote the development of a marine industry, a clear concept of project risk is paramount; in particular, issues relating to human role in operation are critical. In the public domain, reliability of information is often scarce or inappropriate for such environment. Also, an …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 2, 2016 · pp. 30–39 Read article
-
Design and Working of Solar Sprayer Pump for Agriculture
Abstract: The energy crisis fuel, resources depletion and, pollution these three are the major challenges in front of today’s world. The green energy generation from the existence resources is the new thought and which become possible by using non-conventional energy sources and one the option out of solar, wind and bio mass is Solar energy which can be easily converted in electricity using a new concept. Solar sprayer is a perfect …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 2, 2020 · pp. 1–4 Read article
-
Risk, hazards and safety assessment wood industry using job safety analysis
Abstract: This study carried out on a job safety assessment of wood industry. Using the detailed analytical-descriptive survey involving woodworkers, assessment was carried out based on the literature review. In wood industry, the work which performed are manual lifting, forceful gripping, and the hazard like wood dust and hazardous chemicals in all these process, the hazard is reported commonly. The other job like finishing, planning/scraping, hammering arealso done. The Job Safety …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 3, 2020 · pp. 8–12 Read article
-
Labor Productivity in Construction Worksite: Impacting Factors and Measures for Improvement
Abstract: The study aims to identify the influencing factors affecting labor productivity, measure its impact level and ranking of these factors using Relative Important Index. Also, certain measures are suggested for enhancing labor productivity at worksite. Five categories and twenty-eight factors affecting labor productivity were identified through literature survey. Questionnaire survey was also conducted to assess the factors influencing labor productivity at worksite and the same was evaluated through five point …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 1, 2021 · pp. 1–9 Read article
-
Evaluation and Analysis of Fire load in Storage Facility of Manufacturing Industry
Abstract: In recent years, industrial and residential fire is drawing more and more concerns. According to official government data, there have been numerous fire accidents in the industrial sector, leading to both casualties and significant property damage. Of particular concern are certain buildings in the pharmaceutical industry where large quantities of highly flammable and toxic substances are stored in confined spaces. This paper aims to examine the amount of flammable and …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 2, 2023 · pp. 1–7 Read article
-
Enhancing Process Safety Management in the Wellestablished Steel Industry: A Holistic Approach to Thorough Hazard Identification, Rigorous Risk Assessment, and Safety Improvement
Abstract: In order for any industry to achieve success, it is crucial to identify hazards, assess associated risks, and mitigate them to an acceptable level. Due to the inherent nature of operations and the complexity of systems, procedures, and methods, industrial activities inherently involve certain levels of hazards. Hazard analysis plays a pivotal role in identifying potential undesirable events that can lead to hazards, analyzing the mechanisms by which these events …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 2, 2023 · pp. 26–32 Read article
-
Assessment of Fire Safety Measures in Multi-functional High-rise Structures for Enhanced Fire Protection
Abstract: The complex nature of multiple-use high-rise buildings poses significant challenges for ensuring fire protection, given their functional diversity, intricate design, and substantial economic value. This study aims to assess the effectiveness of the physical fire protection systems installed in fourteen randomly chosen commercial high-rise buildings located in Indore. The primary focus is on optimizing these systems within the framework of industrial safety engineering principles. Various methods were employed, including physical …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 3, 2023 · pp. 25–34 Read article
-
Nanostructured Cr-WS2 Solid Lubricant Coating for Space Applications
Abstract: Abstract Tungsten disulphide (WS2) is one of the widely used intrinsic low friction materials, which is commonly used in the form of coating. WS2 offers very low coefficient of friction only in non humid conditions. Presence of humidity destroys this property and restricts its utility. Modifying the structure of WS2 by adding certain metals helps in overcoming this limitation and in addition improves the mechanical properties. Further, deposition technique and …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 12–18 Read article
-
IOT Based Smart Car Parking System Using Arduino
Abstract: The objective of this paper is to offer the basic components such as a microcontroller to a simple automatic parking allocation system that may solve the difficulties of parking allocation. It monitors and reports the availability of a single parking place using an IOT module on-site. Parking vehicles efficiently and easily using slots control is described in this paper, which proposes an IOT- based coordinated architecture for doing so. It …
Published in Journal of Instrumentation Technology & Innovations · Vol. 11, Issue 2, 2021 · pp. 7–18 Read article
-
Smart Grid Energy Saving Technique Using Machine Learning
Abstract: The energy authorities provided the computation at reasonable rates for straightforward congestion management. By giving the specific information needed for energy use that is aimed towards client demands, the microgrid enables significant energy cost reductions & better power cash reserves. Processing data and producing predictions for a developing electrical system would be difficult, nevertheless, given the analysis that has been done and the population's characteristics. A Deep Learning (DL) Electricity …
Published in Journal of Instrumentation Technology & Innovations · Vol. 12, Issue 3, 2022 · pp. 1–10 Read article
-
Arduino Based Temperature Control with PID Controller as Overheat Protector
Abstract: This paper describes a proportional, integral, derivative (PID) temperature controller for overheat protection that is Arduino-based. To regulate and prevent the temperature from rising above a certain threshold, it includes an Arduino UNO board, LM35 temperature sensor, relay, and cooling fan. The system collects temperature readings from the LM35 and delivers them to the Arduino UNO, which processes the data and regulates the output to the relay using a PID …
Published in Journal of Instrumentation Technology & Innovations · Vol. 13, Issue 1, 2023 · pp. 23–28 Read article