Search
620 articles for “CST MWS’14”
Nothing matched all of your words, so these match any of them.
-
Effect of Seat dimensions on operator discomfort while operating Forklifts
Abstract: AbstractThe objective of the study is to investigate the body discomfort sensed by the forklift operators in their operation with respect to seat dimensions and determine the discomfort level at various working shift intervals such as the start of the shift, morning break, before lunch, after lunch, afternoon break and end of the shift with the help of Corlett and Bishop’s method of body mapping. A total of 47 operators …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 3, 2017 · pp. 24–36 Read article
-
Quality and Metallic Pollution Level in Surface Waters of an Urban Industrialized City: A Case Study of Chittagong City, Bangladesh
Abstract: Disposal of urban and industrial waste is one of the major problems and responsible for both soil and water pollution in Chittagong city, Bangladesh. Total 22 surface water samples were collected from different locations of Chittagong city to assess quality and metallic pollution level. The concentrations of Fe, Mn, Cu, Cr and Pb in water samples ranged from trace- 10.37, trace- 1.91, 0.824–0.999, 0.11–1.32 and 1.69–2.56 µg ml-1, respectively while …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 2, 2017 · pp. 9–18 Read article
-
Metallic Pollution Level in Soils of Mymensingh Town, Bangladesh: An Impact of Urbanization and Industrialization
Abstract: Untreated urban and industrial wastes disposal in Mymensingh town are the major problem and responsible for soil and water pollution. Total 24 soil samples were collected from different locations of Mymensingh town to assess metallic pollution level as well as to study some other physicochemical properties of soils. The mean total concentrations of Cu, Zn, Pb, Cd and Fe in soil samples were 68.69, 193.06, 62.47, trace and 18481.82 µg …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 3, 2016 · pp. 17–25 Read article
-
Assessment of Fire Safety Measures in Multi-functional High-rise Structures for Enhanced Fire Protection
Abstract: The complex nature of multiple-use high-rise buildings poses significant challenges for ensuring fire protection, given their functional diversity, intricate design, and substantial economic value. This study aims to assess the effectiveness of the physical fire protection systems installed in fourteen randomly chosen commercial high-rise buildings located in Indore. The primary focus is on optimizing these systems within the framework of industrial safety engineering principles. Various methods were employed, including physical …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 3, 2023 · pp. 25–34 Read article
-
Design of Pressure Vessel as Per ASME Standard and its Thickness Optimization
Abstract: The main aim of that paper is design of pressure vessel as a storage tank. Design and calculation considering as per ASME (American Society of Mechanical Engineering) standard code. Internal design pressure of vessel 3.6 MPa that pressure more than 100 psi pressure so all calculation considering ASME section VIII, division 2. Vessel internal radii 650 mm and calculated thickness 22 mm. analysis of vessel operating pressure 2 MPa at …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 1, 2019 · pp. 23–30 Read article
-
Security System for School Children using Arduino
Abstract: Abstract: This paper presents a system to monitor the transport facility of school children. In the present time due to the increase in cases of kidnapping and road accidents, there is always a concern for the parents regarding the travel safety of the school children. This system is proposed to improve safety measures and prevents such cases. This system is used to enhance monitor pick up/ drop off of school …
Published in Journal of Microcontroller Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 12–16 Read article
-
Design and Implementation of Modular 3D LED Cube
Abstract: Abstract3D LED cube is a real 3D display that is built from many individual LEDs arranged in X, Y and Z axis. Because many LEDs are used these displays have complicated structure, electronic board and software. Different dimension (resolution) of this display are proposed and implemented, but these systems are non-modular, and we can’t develop their dimensions simply and quickly. In this paper, we propose three novel electronic modules for …
Published in Journal of Microcontroller Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 14–28 Read article
-
Bendable Microstrip Antenna with Partial Ground for Textile Related Applications
Abstract: AbstractIn this article, the bendable microstrip antenna with the partial ground plane is proposed. The anticipated antenna is made of jeans substrate and applicable in the frequency range 1.90 GHz to 6.81 GHz with a bandwidth of 112.74 %. There is comparison reference antenna and anticipated antenna. The proposed bendable wearable antenna is used in the textile related application.Keywords: Bendable Microstrip Antenna, CST software, Jeans Substrate Cite this ArticleDeepa Rani, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 17–21 Read article
-
Triangle Cut Circle Shape Bending Antenna for Wide Band Application
Abstract: In this article, an antenna has been simulated for the frequency range of 2.00 GHz to 13.00 GHz, i.e., wideband applications under simulation Software CST using bending material. This bending material is having very less dielectric constant of 1.7. For bending the antenna, Jeans material is used. The return loss of bending antenna is -26 dB at 3.837 GHz resonant frequency. Also, the loss tangent of the antenna is 0.025. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 14–17 Read article
-
Circular Antenna with Square Slot at 2.1 GHz for RF Energy Harvesting Applications
Abstract: In this paper, a single band circular antenna loaded with square slots having an application in RF energy harvesting is introduced. Proposed antenna containing of a circular antenna along with square slot loaded inside in the patch. For an antenna design, Computer Simulation Technique (CST) solver simulator was used. The antenna is being fabricated and its characteristics were measured. The band is covering most of the wireless applications. The simulated …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 22–24 Read article
-
Compact Dual Band Rat Race Coupler Using T-shaped Transmission Line and Fractal Geometry
Abstract: In this paper, a compact dual band rat race coupler is proposed at two different frequency bands. The dual band property is accomplished by transforming the length and impedance of conventional quarter wave transmission line into dual band T-shaped sections. To achieve the compactness, the dual band rat race coupler was transformed into fractal structure using Sierpinski curve analogy. Simple design equations are used for basic design geometries. Then the …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 2, 2017 · pp. 6–12 Read article
-
Design and Analysis of Multi Band Patch with Enhanced Bandwidth
Abstract: In this article, a novel lower edge defected multi-band patch with modified ground structure (or Defected Ground Structure-DGS) with enhanced bandwidth has been presented. The bandwidth can be enhanced by defecting the partial ground and by arc truncation of lower edges of the patch. The antenna was converted into multi-band by defecting the lower corners. The antenna is resonating at multiple bands i.e. 3.7 GHz, 7.87 (~7.9) GHz, 12.19 (~12.2) …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Design of Microstrip Stepped Impedance Low Pass Filter for S-Band Application Using Insertion Loss Method
Abstract: Day by day the requirement of microstrip filter is increasing because of their size, low cost and narrow bandwidth .this paper elaborates the design of stepped impedance LPF by using insertion loss method using Richard’s transformation and Kuroda’s identities. Filter works at 2.65 GHz; the used material is FR4 lossy with dielectric constant 4.3 with a substrate thickness of 1.6 mm for n=3. The designing is done with the help …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 1–5 Read article
-
Triple Band PIFA Antenna Using The DGS Method
Abstract: In this paper, a new design of a triple band Planner Inverted –F Antenna (PIFA) with DGS, for mobile and wireless communication systems is presented. The PIFA antenna consists of ground plate, patch antenna, feeding port and shorting plate connected to the ground plate. The designed antenna has been simulated with the help of the CST (computer Simulation Technology) software microwave studio 2010. The simulated results calculated for the resonant …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 2, 2014 · pp. 9–16 Read article
-
Investigation of Square Monopole Antenna with Slotted Patch
Abstract: A novel antenna with slotted patch for L-Band applications is presented in this paper. The proposed antenna consists of a square patch with rectangular slot. By slotting of the patch the antenna shows enhancement of gain in allocated band. A rectangular slot in the patch and partial ground plane is used in this antenna to enhance return loss and bandwidth. The simulated results have shown that the designed antenna receives …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 21–25 Read article
-
A Dipole Circular Patch Antenna for Operation in the X-Band
Abstract: This microwave engineering research paper proposes, designs, calculates, and simulates a novel dipole circular patch antenna for theoretical wideband operations in the X-band (the 8 GHz to 12 GHz frequency range). This proposed microstrip patch antenna was realized using FR-4 as a dielectric (a thickness of 1.5 mm) with copper being used in both the ground plate and the two transmitting circular elements (the so-called patches with a thickness of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 1–8 Read article
-
Design and Analysis of A Terahertz Microstrip Antenna
Abstract: Terahertz radiation is in the electromagnetic spectrum. Terahertz radiation is used for a variety of purposes since it is non-ionizing and may move in a straight line. It has some similarities with microwaves, in that terahertz radiation can penetrate non-conducting materials, but it shows less depth of penetration than microwaves. Compared to millimeter waves the capacity of Terahertz waves is large enough and possesses high data transmission rates. Terahertz radiation …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Effect of Magnetic Field on Casting Parameters
Abstract: AbstractThe casting process is one of the oldest manufacturing methods involving squeezing / jolting the green sand used as moulding material, and further was developed with use of binders such as clay/organic resins. The constants search for newer moulding material lead to the magnetic mould involving steel shots and application of magnetic field. The preliminary trials on one of the process parameters i. e. Magnetic field was carried out and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 30–35 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Centrifugal Casting of Nano Crystalline TiB2 Reinforcement Particulate Reinforcement in Al-Alloy Matrix
Abstract: A method of producing Nano size TiB2 particles within an aluminium matrix is the in situ reaction synthesis method, using KBF4 and K2TiF6 potassium based bearing fluxes. The advantages of this in situ reactive process are a small particle size and good particle/matrix interfacial bonding. However, this method is limited to producing low particulate volume percentage material (˂6 vol%). To overcome this limitation, centrifugal casting has been investigated. A series …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 7–13 Read article