Search
418 articles for “Bond”
-
Behavior of Sandwich Composites under Edgewise and Flatwise Compression; Effect of Variation of Fibre Architecture and Core Density
Abstract: The present paper is focused on the fabrication of foam–cored sandwich composites using manual hand layup technique and testing under in-plane compression. The sandwich construction comprises of polyurethane foams of five varied densities with E-glass fibre in vinylester resin as face sheets. Four different varieties of E-glass fibre are used. As compression properties are of critical importance during the design of lightweight structures, an attempt is made to study the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 1, 2015 · pp. 18–35 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Centrifugal Casting of Nano Crystalline TiB2 Reinforcement Particulate Reinforcement in Al-Alloy Matrix
Abstract: A method of producing Nano size TiB2 particles within an aluminium matrix is the in situ reaction synthesis method, using KBF4 and K2TiF6 potassium based bearing fluxes. The advantages of this in situ reactive process are a small particle size and good particle/matrix interfacial bonding. However, this method is limited to producing low particulate volume percentage material (˂6 vol%). To overcome this limitation, centrifugal casting has been investigated. A series …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 7–13 Read article
-
Aerogel Composite from Scope–A Study
Abstract: This article is a study of nano-metric porous dimension so as to originate open scripture to allocate semi-composite organized after drying. Particulate merged add an addendum anew formation to subdivide inter atoms to bond nano-composite ingredients. Properties of matter have been identified to be lower than 100 nm. Reinforce of aerogel as blanket has been designated to bear as usual insulation upon typifying configurative scope as substrate to cover. Adjoined …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 1–12 Read article
-
Surface Modified Abaca Fibers: Physico-Mechanical, Morphological and Degradation Properties Evaluation
Abstract: Lignocellulosic fibers are used as cost-cutting fillers in plastics factories. Amid several factors, the ultimate performance of composite ingredients depends on the bond between the matrix resin and the filler, and hence on the quality of the interface. To acquire optimal performance of the end product, adequate interaction between the matrix and the lignocellulosic ingredient is preferred. This is often acquired through surface modification of the matrix or filler. Abaca …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 34–46 Read article
-
The Role of Surface Treatments on Mechanical and Interfacial Shear Strength of Pineapple Leaf Fibers
Abstract: Natural fibers are seen as having potential application as reinforcing agents in polymer composite materials due to their main advantages, which include moderate strength and stiffness, low cost, and being an environmentally beneficial, degradable, and renewable material. They are susceptible to absorbing moisture because of their innate hydrophilicity, which can weaken or plasticize the adherence of the fibers to the surrounding matrix and impact the performance of composite materials employed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 18–28 Read article
-
Recording of Surface-Driven Capillary Flow inside the Polymeric Microchannel Coated with Diamond like Carbon
Abstract: In this experimental work, author has fabricated a single polymeric microfluidic device by maskless lithography, hot embossing lithography and direct bonding technique. Author has coated the diamond like carbon inside the microchannel by plasma enhanced chemical vapor deposition system. Author has recorded the surface-driven microfluidic flow of dyed water in the fabricated device. The meniscus profile is recorded during the surface-driven microfluidic flow. This research work may be useful to …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 3, 2020 · pp. 8–11 Read article
-
Ab Initio Investigation on Half-Heusler Compounds CoVZ (Z = P, Bi, Sb, As): Understanding Structural, Electronic, Magnetic, and Elastic Behavior
Abstract: The structural, electrical, mechanical, and magnetic properties of Half-Heusler CoVZ (Z= P, Bi, Sb, and As) compounds have been studied using the ab initio method. Here, we use the full potential linearized augmented plane wave (FP-LAPW) method, which is implemented by WIEN2k. The compounds CoVZ (Z= P, Bi, Sb, and As) are near to the Fermi level as implemented in the WIEN2k algorithm, exhibiting 100% spin polarization with finite band …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 3, 2023 Read article
-
Characterisation of Plasma Sprayed CNT-Alumina Composite Coatings on Boiler Tube Steel
Abstract: In this research work, the 1.5, 2 and 4 wt.% CNTs-Al2O3 coatings were prepared and successfully deposited on T22 boiler tube steel using plasma spray process. Ni-Cr was also used as bond coat before applying CNTs-Al2O3 coatings. The coatings were subjected to metallography, XRD and SEM/EDAX analysis. The porosity of CNTs-Al2O3 mixed coatings on T22 boiler steel was found to be decreasing with increase in CNTs content. The CNTs were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 1–15 Read article
-
A Review on Sisal Fiber Reinforced Composite Materials and Effects of Various Factors on its Mechanical Properties
Abstract: AbstractIn the modern world of science and technology, there is current rising trend towards the augmentation of mechanical properties of composites by introducing different materials in many flexible ways to overcome the newly resurgent demands, especially in engineering practices. Many natural fibers like jute, sisal, bamboo, bagasse, hemp and banana find their application as a reinforcing component in composite materials due to their light weight, low cost, low density, biodegradability, …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 25–28 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Investigation of Jute Mat with Waste Fish Net by Varying Matrices in Hybrid Composites
Abstract: AbstractIn this study the low cost material of multi filament waste fish net and jute fibres were incorporated as the main reinforcing materials with epoxy resin and polyester resin as the matrix in order to increase the strength of the hybrid composites. The samples were fabricated using hand layup technique. The nylon fibre of waste fish net possesses high impact strength, elasticity property and highly resistant to abrasion of chemicals …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 27–34 Read article
-
Tung Oil Based Polyurethanes: A Short Review
Abstract: Polyurethane (PU) formulated from natural polyols obtained from Tung oil (TO) have improved hydroxylation of the double bonds in the fatty acid chains of the unsaturated oil followed by the alcoholysis of the hydroxylated oil. The comparative chemical analysis between unmodified and modified TO suggested that the hydroxyl content increased significantly after the hydroxylation and alcoholysis reactions. Incorporated wood flour (WF), microcrystalline cellulose (MCC) or rice husk ash (RHA) as …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 43–47 Read article
-
Synthesis and Characterization of Ether Containing Tetraglycidyl Epoxy Reinforced with Amine Functionalized Graphene Oxide (F-Go) and It’s Nanocomposites
Abstract: AbstractTGDDE matrix material along with functionalized graphene oxide (F-GO) as reinforcement was used to develop a unique skeletally modified tetra functional epoxy nanocomposites. Amine functionalization of graphene oxide nanoparticles (F-GO) on its surface was achieved by grafting 3-aminopropyltriethoxysilane (APTES) as coupling agent. The FT-IR spectrum revealed that the silane coupling agent was covalently bonded to the surface of graphene oxide nanoparticles, offering better dispersibility and compatibility with TGDDE epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 39–51 Read article
-
Investigation of Dielectric Properties of a Novel Hybrid Polymer Composite using Industrial and Bio-waste
Abstract: AbstractFly ash is an industrial waste which creates environmental problems. Coir dust is a byproduct of coir fiber production. Novel low-cost hybrid polymer composite using coir dust and fly ash particle reinforcement is prepared. Investigation of dielectric behavior of this hybrid polymer composite proves its efficacy as a high-value marketable product. Individual compacts of coir dust, fly ash, coir dust and fly ash are also prepared for comparison with the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 22–27 Read article
-
Experimental Studies to Record the Lithographically Fabricated Microstructures by Surface Profilometry and Scanning Electron Microscopy for Microfluidic Laboratory-on-a-Chip Systems
Abstract: In this research paper, the poly(methyl methacrylate) (PMMA) microfluidic laboratory-on-a-chip system is fabricated in the cleanroom laboratory by maskless lithography, hot embossing lithography and direct bonding technique. The microstructures of the lab-on-a-chip system are measured by surface stylus profilometer. Also, the images of microstructures of lab-on-a-chip system are captured by using scanning electron microscopy (SEM). This fabricated lab-on-a-chip system is useful in bioengineering applications.
Published in Journal of Polymer & Composites · Vol. 4, Issue 1, 2016 · pp. 27–36 Read article
-
Experimental Studies on the Passive Capillary Flow of Non-aqueous Working Liquids in PMMA Microfluidic Devices of Rectangular Cross-Sections
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and channel aspect ratio on the surface-driven capillary flow of non-aqueous working liquids are studied in the fabricated PMMA microfluidic devices. The working liquids are ethylene glycol, isopropyl alcohol (IPA) and ethanol. These experimental studies will be useful to manipulate different non-aqueous working liquids inside …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 29–33 Read article
-
Characteristics of Novel Geopolymer Composites Synthesized from Red Mud and Diatomaceous Earth in Autoclave Conditions without Using Alkaline Activators
Abstract: The geopolymer-based materials have been studied and developed since the last decades of the 20th century and applied in many fields of life. The production of geopolymer also has many different levels of technology from low to high technology which depends on quality and the applied fields of products. The geopolymer composites are also considered as friendly environmentally products related to low energy consumption production technology; reuse industrial wastes as …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 81–91 Read article
-
Effects of Plasticizers on Structures of Chemical Functional Groups, Morphologies, Water Vapor Permeability, and Thermal Properties of HPMC/BW Biopolymer Films
Abstract: Food preservation is one of the fields that many researchers are interested in, especially in the epidemic period like COVID-19 today. The better food or agricultural products are preserved for a long time, the more it ensures social stability for state management related to food security for people. This paper introduces one kind of biopolymer films with investigation on effect of plasticizers to its characteristics. In order to produce biopolymers, …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 10–20 Read article