Search
1962 articles for “Al-6061-TiB2, metal matrix composite, stir casting, microstructure” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Kenaf Reinforced Polyamide Composite Materials: A Systematic Review
Abstract: Sustainable development has become the global target to prevent exploitation and degradation of our environment in the pursuit for industrial growth. Almost all sectors including engineering, dental, medical, aerospace, etc use synthetic polymers in daily basis. The growing need for sustainable natural alternatives has encouraged research on natural fibres reinforced polymers like kenaf reinforced polyamide composites. Comprehensive evaluation of existing studies is crucial to understand the scope in this field …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 158–169 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
Electrochemical Evaluation of Corrosion Behavior in Industrial Alloys Under Acidic and Marine Conditions
Abstract: Corrosion represents a spontaneous physicochemical transformation in which metals revert to their more stable thermodynamic state, typically oxides, hydroxides, or sulfides, as a result of interaction with environmental elements. Rather than being a simple surface reaction, corrosion is a complex electrochemical phenomenon that significantly influences the durability, reliability, and performance of metallic structures across industrial, marine, and domestic sectors. The consequences extend beyond material degradation, contributing to substantial economic losses, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 24–36 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
The Effect of Dried Green Alga Chlorella sorokiniana MH923013 on Corrosion Protection of Stainless Steel in Saline Media
Abstract: Metals interact with their surroundings to undergo corrosion, which is also defined as surface damage or metal decline in an aggressive setting. The objective of the current study was to assess the ability of the green alga Chlorella sorokiniana MH923013 to prevent corrosion of stainless steel in saline medium. Atomic force macroscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) were used to analyse a dry mass of green algae. Electrochemical …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 24–32 Read article
-
Mechanical Properties Investigation of Green Waste Composite Material
Abstract: Widespread accessibility and abundance of natural fibres are driving forces behind renewed focus on eco-friendly solutions. Researchers have recently begun to focus on natural fibres as reinforcement due to their many advantages over more conventional materials. Natural fibre is an attractive ecological and biodegradable alternative to most common glass fibre, synthetic reinforcement, because of its high specific and low cost mechanical capabilities. India is home to a wealth of untapped …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 28–36 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Analyzing the Sheet Metal Extrusion Process Using Finite Element Analysis
Abstract: A wide range of sheet metal forming techniques has been developed to make it easier to produce intricate 3D objects. However, the knowledge still isn't sufficient. The sheet metal extrusion method was examined in this research as one of the common sheet-bulk metal manufacturing technologies. Consideration of the flow-stress curve's impact across a broad range of plastic strain and ductile damage played a pivotal role in constructing a realistic finite …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 13–25 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
The Effect of Alcoholic, Aqueous and Crude Extracts of Lemon citrus Seeds on Staphylococcus and Klebsiella Bacteria
Abstract: Five isolates of staphylococcus bacteria identified by phytic were obtained and activated on solid saline mannitol medium, where the colonies appeared in a golden color. Three extracts of dry lemon seeds were prepared (raw, 1% aqueous extract, 1% alcoholic extract). It was celebrated that the aqueous quotation was added operative on bacterial progress than the alcoholic and rudimentary sources. Three isolates of Klebsiella bacteria identified by VITEK were also obtained, …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 14, Issue 3, 2024 · pp. 32–36 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Enhancing Road Safety: A System for Vehicular Accident Detection, Prevention, and Rescue Alerts
Abstract: The Vehicular Accident Detection, Prevention, and Rescue Alert System is a comprehensive solution aimed at bolstering road safety by integrating multiple advanced technologies. It merges drowsiness detection, alcohol level monitoring, and instant emergency alerts to mitigate accidents and expedite rescue efforts. Modern computer vision and machine learning techniques are used by the Drowsiness Detection Alarm to track driver conduct and spot drowsiness indicators. Upon detecting drowsiness, an immediate alarm is …
Published in International Journal of Solid State Innovations & Research · Vol. 2, Issue 2, 2024 · pp. 7–11 Read article
-
Composite Gel-Fibers and Solid-State-Processed Tapes Based on Disentangled Ultra-High Molecular Weight Polyethylene and Electrically Conductive Carbon Black: a Comparative Study
Abstract: In this study, oriented nanocomposite gel-spun fibers and solid-state-processed tapes were manufactured and analyzed. The fibers and tapes were produced using a specific type of nascent disentangled ultra-high molecular weight polyethylene (UHMWPE) reactor powder. As the filler, commercially available electrically conductive carbon black (CB) was used. The ultra-high filler content values up to 75 wt.% were achieved for the UHMWPE/CB gel-spun fibers, while the degree of filling was limited (up …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 151–165 Read article
-
Na-Air Battery: The Battery of the Future—A Review
Abstract: Metal-ion batteries came into the limelight with the invention of Zn-ion battery as early as 1878, but its commercial viability came into picture in 1990 and lithium-ion cell in 1977. Since then, a number of metals have been experimented upon and similar rechargeable secondary storage batteries like Al-ion, Na-ion, Sn-ion, Mg-ion, K-ion have been developed. In this type of battery, electrochemical dynamics involves the movement of only one kind of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 3, 2024 · pp. 1–19 Read article
-
A Survey of Several Machine Learning (ML) Algorithms for Security Solution in Internet of Things (IoT) Networks
Abstract: The Internet of Things (IoT) refers to the integration of physical objects with the Internet, allowing for connectivity and monitoring. This idea has garnered immense attention from researchers and users alike, driven by the widespread accessibility of the Internet. It spans a wide range of devices, including smart versions of conventional appliances, innovative tools tailored for Internet-enabled ecosystems, and sensors that leverage connectivity to revolutionize industries such as manufacturing, healthcare, …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 12, Issue 1, 2025 · pp. 1–11 Read article