Search
381 articles for “flexural”
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short-Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber’s cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 68–80 Read article
-
Marine Algal Fiber-Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 90–100 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal–polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 36–47 Read article
-
Recent Advances in Polymer Analysis and Characterization Techniques for High-Performance Materials
Abstract: Polymers play a vital role in various fields, from biomedical engineering to energy storage. Developing high-performance polymers requires a deep understanding of their structure, properties, and behavior. This review paper delves into recent advancements in polymer analysis and characterization techniques. This paper is a comprehensive bibliometric analysis which investigates the research landscape of geopolymer concrete incorporating construction and demolition waste (CDW) by analyzing 389 publications from the Web of Science …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–93 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Bio-Inspired FGPCs for Biomedical and Structural Applications
Abstract: Bio-inspired functionally graded polymer composites (FGPCs) represent a new class of smart materials that use gradient material distributions to enhance mechanical and biological properties, mimicking natural systems like bones, shells, and plant stems. FGPCs exhibit smooth gradient distributions across interfaces, which improves biocompatibility and reduces the risk of failure under complex loading and environmental conditions. In this study, bio-inspired FGPCs were designed, fabricated, and validated using a combined experimental and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 456–481 Read article
-
Artificial Intelligence-Assisted Multi-Objective Optimization of Agricultural Biomass-Reinforced Polymer Composites
Abstract: Agricultural biomass can reduce the environmental burden of polymer composites, yet its heterogeneous structure creates competing effects on strength, moisture resistance, density, and process ability. This study developed an artificial intelligence-assisted framework for balanced composite formulation. Experimental data of agricultural biomass reinforced polymer composites were gathered, harmonized and validated using leakage-controlled validation. The mechanical and physical properties were predicted by artificial neural networks and conventional regression models. Explainable analysis gave …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 202–222 Read article
-
Dynamic Analysis of Honeycomb Sandwich Laminated Composite Plate using ANSYS
Abstract: A structural sandwich is a peculiar form of a laminated composite comprising of a combination of distinct materials which are bonded together to use effectively the properties of each separate component to the structural advantage of the whole assembly. Two thin, rigid and quite strong faces in the framework are partitioned by a thick, light and weaker core. The faces are attached adhesively to the core to ensure effective load …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article
-
Mechanical Properties of Aerated Concrete
Abstract: Nowadays it is very important to make the concrete economical. Aerated concrete is ordinary concrete that contains controlled amounts of air in the form of microscopic bubbles and having low density as compare to conventional concrete. These intentionally entrained air bubbles are extremely small. By using Air Entraining Agent (AEA), cement, coarse aggregate, fine aggregate and water we create aerated concrete. The experiment is perform on aerated concrete which is …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 3, 2018 · pp. 20–29 Read article
-
Innovative Applications of Aerated Concrete– A Review
Abstract: This paper deals with the review of literature regarding the Aerated Concrete. The main aim of the research was to study the application and properties used for paving structure, retaining structures, as a mortar, etc. The papers studied for the project mainly consist of the use of air entraining agent with different materials. For finding the mechanical properties, moisture content, freezing thawing effects, corrosion, etc., different experimental procedures, methods, materials …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 3, 2018 · pp. 13–19 Read article
-
Study of Nano Additives in Concrete mix Proportioning Using Nano Particle
Abstract: This research literature reviews on nanomaterials in concrete. Now, the conventional concrete Properties of nanomaterial utilization have been introduced to various attentions to increase. Ultimately, as an introduction, the nanomaterial is increasing the strength and durability of the Concrete. The nanomaterial is described as the material that includes the particle size Less than 200 nm. While the investigation of Concrete in the importance of nanomaterials, the demand is at least …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 37–48 Read article
-
Strength and Durability of Concrete Cubes and Cylinders Wrapped with FRP
Abstract: Experimental were conduct on the distressed reinforced cement concrete compressive element and on the same after they have been retrofitted for rehabitation. Presently, FRP materials are also been started use in construction field in the form of wrapping to enhance the load carrying capacity, shear and flexural strength as well as ductility. This is an experiment based project which deals with strengthening and load deformation relationship of reinforced cement concrete. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 3, 2020 · pp. 7–13 Read article
-
Use of Steel Slag in Fly Ash Based Concrete for White Topping
Abstract: The fast growth in industrialization has resulted in tons of by products or waste materials, which can be used as secondary cementitious materials such as fly ash, steel slag etc. The use of these byproducts not only helps to utilize these waste materials but also improves the properties of concrete in fresh and hydrated states. Steel slag and fly ash are the two materials used in concrete. Most concrete produced …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 63–69 Read article
-
Reuse of Scrap Tyre as Partial Replacement of ¾˝ Natural Coarse Aggregate in Concrete and its Impact on Properties of Concrete
Abstract: A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This paper tackles the problem of the waste tyre, thrown after use in vehicles. In order to dispose of or at least reduce the accumulation of rubber tyre waste, it has been suggested to reuse these waste materials to substitute a percentage …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 1, 2015 · pp. 44–48 Read article
-
Experimental Study on Fibre Reinforced High Performance Concrete with Silica Fume
Abstract: This paper presents the effect of silica fume and glass fibre in High Performance Concrete (HPC). In this study, High Performance Concrete mixes with silica fume of 0, 10, and 20% with addition of glass fibre of diameter 14 μ and 12 mm length at various percentages as 0, 0.3, and 0.6% by the volume of cement on M75 grade of concrete. The mix proportions of concrete had a constant …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 26–30 Read article
-
Influence of Recycled Coarse Aggregate on Properties of Concrete
Abstract: This study focuses on the influence of recycled coarse aggregate (RCA) on properties of concrete. Five different mixtures of RCA replacement comprising 0, 25, 50, 75 and 100% RCA were used. It was found that workability, saturated bulk density, compressive strength and flexural strength decreases with increase in RCA content in concrete. 100% manually RCA concrete passed the 17 kN/m2 compressive strength limit generally acceptable for concrete work of non-high …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 3, 2013 · pp. 45–53 Read article
-
Experimental Investigation on the Strength of Concrete with Partial Replacement of Cement using GGBS and Alccofine
Abstract: Cement is the most important ingredient of concrete. A large scale production of cement consumes large amount of energy and produce a large amount of carbon dioxide (CO2) gas which harmful to human as well as environmental and natural resources. So, to avoid the effect to use industrial waste productions as a supplementary cementitious material (SCM) in making concrete i.e. silica fumes, rice husk ash, fly ash, metakaolin, alccofine, ground …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 1, 2023 · pp. 35–43 Read article
-
Enhancing Blended Concrete Characteristics: A Comprehensive Review of GGBS and Steel Slag Effects from Performance and Sustainable Perspectives
Abstract: Avinash Kumar1, *, Sanjeev Kumar Verma2 Abstract Blended concrete, incorporating supplementary cementitious materials (SCMs), has gained significant attention in the construction industry due to its potential to improve concrete properties and promote sustainability. This review article provides an extensive examination of how two commonly utilized Supplementary Cementitious Materials (SCMs), namely Ground Granulated Blast Furnace Slag (GGBS) and Steel Slag, impact the properties of blended concrete. The review aims to provide …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 26–32 Read article