Search
479 articles for “Orientation”
-
Relative Efficiency of Manufacturing Companies in India Using Data Envelopment Analysis
Abstract: Manufacturing holds a key position in the Indian economy, accounting for nearly 16 percent of the real GDP in FY 12 and employing about 12 percent of the country’s labour force. Growth in the sector has been strong, outpacing overall GDP growth since the past few years. For example, while real GDP expanded at a CAGR of 8.4 percent over FY 05–12, growth in the manufacturing sector was marginally higher, …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 3, 2015 · pp. 27–33 Read article
-
Performance Analysis of Induction Motor using DTC Technique
Abstract: AbstractDirect Torque Control is a control method used for high-performance torque control in AC drive systems. The standard DTC drive includes a couple of hysteresis comparators, a flux and torque estimator and a selection table for voltage vectors. Torque and flux are governed simultaneously by implementing appropriate voltage vectors, and de-coupling control of torque and flux can be accomplished by restricting these amounts within their hysteresis bands. The DTC requires …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 2, 2019 · pp. 11–18 Read article
-
Solar Refrigeration using Peltier Module
Abstract: AbstractIn the ongoing year, vitality emergency and condition corruption because of the expanding CO2 emanation and ozone layer consumption has become the essentially worry to both created and creating nations. Sun based refrigeration utilizing Peltier module needn't bother with any sort of refrigerant and mechanical gadget like blower, prime mover and so on for its activity. Our venture uses the sun-oriented vitality for its activity. Sunlight based refrigeration utilizing Peltier …
Published in Journal of Instrumentation Technology & Innovations · Vol. 10, Issue 1, 2020 · pp. 30–34 Read article
-
Analysis of the Extent of Patients’ Rehabilitation from Knee Injuries or Surgery using Recovery Indices
Abstract: Many major knee surgeries or injuries have long rehabilitation periods, during which the patients may have abnormal gait cycles. The patient transitions to independent exercises performed at home, which are crucial to recovery. Doctors need to have a means to closely track patients exercises for proper recovery. This research utilizes statistical analysis tools, which is applied to analyze gait parameters of patients undergoing the rehabilitation process at different stages of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 3, 2017 · pp. 27–40 Read article
-
Fabrication and Performance Analysis of Automatic Dual-axis Sun Tracking System using LDR Sensors
Abstract: Solar energy is experiencing exponential growth as a viable technique of increasing renewable energy resources. Engineers need to be versed with the innovation used in this domain.Since the solar array can remain oriented to the sun, solar tracking enables considerably increased power generation. A dual-axis solar tracker can track the Sun's radiation on both horizontal andvertical axes at the same time. They work on the same concept as astronomical telescope …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 3, 2022 · pp. 37–48 Read article
-
Study Stator Voltage Control Method for Induction Motor Torque Control using MATLAB Simulation
Abstract: AbstractThis paper presents a study stator voltage control method for induction motor torque control using MATLAB simulation. This is to improve induction motor speed control. Speed sensor is used to control the speed in feedback and complete simulation of the direct torque control in closed-loop. The system is to be tested by use a MATLAB/ Simulink program. The different control methods are used to control the speed of induction motor …
Published in Journal of Microcontroller Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 18–24 Read article
-
Smart Over Speed Fuel Exhaustion Calculator Based on IOT
Abstract: AbstractThe primary objective of this paper is to calculate the fuel exhausted from a two wheeler by applying brakes during over speed. This is possible by potential usage of microcontrollers and interfacing devices and components. The secondary objective of this paper is to conserve the fuel by giving the information related to the fuel exhaustion and thereby creating awareness among the vehicle holders by showing the results and statistics of …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 17–20 Read article
-
Agile Software Methodology with Tools and Improvements
Abstract: This Paper explains about the new technologies and techniques used in the Agile Software Methodology. Previous days the technology of waterfall model have been used. Water fall model is the elderly model based on the business requirements written by business analyst. Based on the business requirements technologist developed their own requirement and developed the Product. The later, new Agile method is a repetitive process where the demand and solution and …
Published in Journal of Microcontroller Engineering and Applications · Vol. 8, Issue 3, 2021 · pp. 38–44 Read article
-
Implications from Wireless Messenger – Emerging Trend
Abstract: Wireless communication has implied to control home as well industries by accession from status abduction inform. Subjected risk has thereby secured without inclusive of any manual perform. Said economist perform has attributed thereby out of complications so as to mitigate undesirable account out past by negligence orientation. Technologies used to implement these systems include Z-Wave, Insteon, Wavenis, Bluetooth, WiFi, and ZigBee, where ZigBee technology is new standard in wireless area …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 9–13 Read article
-
A Quad-Element UWB-MIMO Triangular Monopole Antenna with Triple Band -Notch and High Isolation
Abstract: A quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation is proposed in this paper. The presented antenna consists of four triangular -shaped antenna elements, which are arranged in orthogonal orientation. This antenna is printed on low-cost FR-4 substrate with dielectric constant of 4.4 and its overall size is 50 × 50 × 1.6 mm3. Its operating frequency band is 2.97~11GHz. High isolation of 22dB between four …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 30–37 Read article
-
Design and Implementation of UWB-MIMO Triangular Antenna with Notch Technology
Abstract: The paper proposes a quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation. The antenna comprises four triangular-shaped elements arranged orthogonally, printed on a low-cost FR-4 substrate with a dielectric constant of 4.4. Its dimensions are 50 × 50 × 1.6 mm³, and it operates within the frequency band of 2.97 to 11 GHz. To achieve high isolation of 22 dB between the four radiatingelements, a square …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 8–15 Read article
-
An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions
Abstract: AbstractIn the present study, the experiments were performed to investigate the effect of heat treatment parameters viz. soaking time and temperature on the tensile properties and hardness of Aluminium alloy (AA) 6082-T6 sheet. The sheet was heat treated and cut the standard tensile specimen ASTM E8M-04tofind out the tensile properties and hardness value at different temperature with respect to different soaking time. Air circulation oven type electric furnace was used …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 36–41 Read article
-
Free Vibration Analysis of Moderate Thickness in Orthotropic Laminated Composite Plate Using FE Method
Abstract: This study presents the free vibration analysis of a composite laminated plate with respect to various parameters. Effect of orientation on a plate, effect of boundary conditions, effect of thickness to width ratio, effect of changing the number of ply on a plate and the effect of young’s modulus ratio are presented in this study. Classical boundary conditions are used to perform all the studies. Free vibration analysis of plate …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 1–8 Read article
-
Principles and Use of Analytical Transmission Electron Microscope
Abstract: At the beginning of the review the analytical Transmission Electron Microscope is introduced. Equipment, imaging, diffraction and use of analytical TEM are described. Electron path under magnetic lens is delineated, emphasizing the lens aberrations, diffraction, astigmatism and gun brightness. Selected area electron diffraction patterns of Al-Cu and Inconel super alloy are used to index crystallographic planes and to derive zone direction while basic sources of diffraction contrast are depicted using …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 27–49 Read article
-
Performance analysis of single axis solar tracking system with IoT Monitoring system
Abstract: The goal of this project is to create a single-axis solar tracking system that will work with an IoT monitoring system to maintain solar panel alignment with the Sun for maximum solar energy gathering. Single-axis solar tracking is a method of optimizing the energy output of a solar panel by adjusting its position along a single axis throughout the day in order to maximize their exposure to sunlight. Since many …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 22–28 Read article
-
A Review on Sisal Fiber Reinforced Composite Materials and Effects of Various Factors on its Mechanical Properties
Abstract: AbstractIn the modern world of science and technology, there is current rising trend towards the augmentation of mechanical properties of composites by introducing different materials in many flexible ways to overcome the newly resurgent demands, especially in engineering practices. Many natural fibers like jute, sisal, bamboo, bagasse, hemp and banana find their application as a reinforcing component in composite materials due to their light weight, low cost, low density, biodegradability, …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 25–28 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article
-
Processing and Dielectric Properties of Bio-fiber Reinforced Polymer Composite Using Brown Grass Flower Broom
Abstract: AbstractA novel low-cost polymer composite using brown grass flower broom reinforcement is prepared. From the physico-mechanical characterization, it is found that the prepared composite is lightweight and of high strength. Investigation of dielectric behavior of this polymer composite proves its efficiency as a high-value marketable product. As the composite is made using bio-materials from local resources, its cost is less as compared to other polymer composites available today. Keywords: polymer …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 28–32 Read article
-
Microstructural Characteristics and Mechanical Properties of the Green Composites Reinforced Bamboo Optimized the Treated Parameters
Abstract: Concrete and steel are traditional building materials with high strength and stress. They are usedeffectively in civil construction, structures of bridges and others. According to the current trend, theconstruction materials have more attention for low density and high durability which produced fromnatural materials; moreover, they are able to be recycled and reused. In this study, the green compositeswere fabricated based on the highly performance epoxy combined with bamboo to get …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 28–38 Read article
-
Static and Dynamic Analysis for Optimum PZT Positioning and Optimum Voltage in a Delaminated Smart Composite Beam
Abstract: This paper conducts a comprehensive static and dynamic analysis of a delaminated composite beam with and without a piezoelectric layer making use of the principle of minimum potential energy. A new finite element model for composite laminate with delamination defect using cohesive zone method is developed using ANSYS APDL. A lead zirconate titanate (PZT) patch is embedded over the delaminated model following the results obtained from static analysis. The work …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 13–27 Read article