Search
353 articles for “tensile mechanical strength”
-
Study of the Rheological, Physical-Mechanical Properties of Disposed Polypropylene and Polyvinyl Chloride Binary Mixtures
Abstract: In this study, various compositions were prepared by modifying the decommissioned polypropylene (PP)-based polymer waste with polyvinyl chloride (PVC) in different proportions for the purpose of modification, and the flow index and physical and mechanical properties of their alloys were studied. As a result of the research, the following results were obtained. PP/PVC binary compositions were prepared and samples were obtained based on 6 different proportions by changing the amount …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 Read article
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Investigation and Concerns on the Mechanics Behind Grain Refinement During ECAP Operation with Applications to Polymers
Abstract: Materials science and engineering have studied Equal Channel Angular Pressing (ECAP) grain refining. This abstract discusses important findings and concerns about grain refining mechanics during ECAP.A adaptable severe plastic deformation method; ECAP refines grain patterns in many metallic materials. Many researches have attempted to understand this phenomenon's complex mechanisms. Microhardness and microstructure (morphology) of AL alloy increase with the increase in pass numbers. It is observed that the mechanical property …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 1–11 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Evaluating the Effect of Carbon Fillers on the Mechanical Properties of Jute and Epoxy Composite Wind Turbine Blades
Abstract: Natural fibers are a sustainable substitute for synthetic materials because of many benefits, which include light weight, biodegradability, renewability, and affordability. An approach to sustainable blade design that shows promise is its use into wind turbine blades. The study focuses on jute/epoxy composite's tensile strength, impact strength, water absorption, void fraction and degradation with carbon fillers and apply in making small wind turbine blades. To fabricate the composites, two jute …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–203 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Characterization of Bamboo-Fiber Reinforced Geopolymer Composites
Abstract: In this project, we plan to produce and assess a new, eco-friendly composite made from geopolymer (from a combination of fly ash and GGBFS), strengthened with chemically treated bamboo fibres for retrofitting earthquake-resistant buildings. Geopolymer is produced by activating a mixture of fly ash and GGBFS with sodium silicate and sodium hydroxide solutions. We have produced and analyzed bamboo fibre-reinforced geopolymer composites as potential materials for seismic retrofitting of structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1007–1025 Read article
-
Explainable Machine Learning for Process Parameter Optimization in Gradient 3D-Printed Polymer Composites
Abstract: The explainable machine learning-based structure may be employed to achieve a favorable process parameter of the graduate 3D-printed polymer composite structures to improve the mechanical and thermal properties without compromising the transparency of the decisions made during the fabrication process. Gradient composite specimens were made by systematically varied process parameters like nozzle temperature, raster orientation, deposition speed, gradient transition rate and fused filament fabrication. A predictive model of tensile strength …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 847–866 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Fused Deposition Modelling-based 3D Printing: A Systematic Literature Review Employing VOS Viewer
Abstract: Fused Deposition Modelling, also known as FDM, has emerged as a major technology in the field of 3D printing. It provides adaptability and cost-effectiveness in the process of materializing intricate designs. This paper intends to conduct a complete bibliometric analysis (BA) of 3D printing based on fused deposition modelling (FDM) in order to comprehend the trend and research field. After extracting data from the Scopus database using the titles, abstracts, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 197–202 Read article