Search
517 articles for “scanning”
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Comparative Thermal Stability of Structural Acrylic and Polyurethane Adhesives under High Heating Rate Conditions
Abstract: This study examines the thermal stability and degradation characteristics of structural acrylic and polyurethane adhesives through Differential Scanning Calorimetry (DSC) at an elevated heating rate of 15 °C/min. The purpose of this study is to assess the impact of rapid thermal excitation on the volatile loss of adhesives, their curing behaviour, and thermal decomposition profiles elements that are essential in high-speed manufacturing and thermally challenging settings. The findings indicated that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 717–725 Read article
-
Kinetic Analysis of Structural Acrylic Curing by DSC: Polymerization and Phase Transition Optimization
Abstract: Differential Scanning Calorimetry (DSC) was used to analyse the thermal properties and curing behaviour of a structural acrylic adhesive at heating rates of 5, 10, and 15 °C/min. The study focused on the curing kinetics, glass transition temperature (Tg), specific rate (k), and activation energy (Ea) of the polymerization reaction. The material is tested according to ASTM 3418 standards. Results showed that increasing the heating rate shifted the endothermic curing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 726–733 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
AI-Driven DevSecOps Automation: An Intelligent Framework for Continuous Cloud Security and Regulatory Compliance
Abstract: Cloud-native systems, microservices, and infrastructure-as-code (IaC)–oriented CI/CD pipelines have accelerated the pace of software delivery, yet they have also introduced new layers of operational complexity and widened the overall security exposure of modern applications. Traditional DevSecOps workflows still depend heavily on isolated scanners, manual reviews, and static governance processes that are not well-suited for the elasticity and constant change characteristic of multi-cloud environments. To address these limitations, this paper introduces …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 13, Issue 1, 2025 · pp. 01–15 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Intelligent Brain Tumor Diagnosis with AI-Based Classification* * Harnessing Deep and Machine Learning for Tumor Identification
Abstract: Brain tumors have become a leading cause of cancer- related deaths, posing significant health risks to many patients. This urgent medical challenge calls for rapid, automated, and reliable techniques to detect brain tumors accurately. Timely and precise tumor identification is crucial for devising effective medical plans that have the potential to save lives and improve patient outcomes. By leveraging advanced image processing methods, healthcare professionals can enhance their diagnostic capabilities …
Published in International Journal of Cell Biology and Cellular Functions · Vol. 4, Issue 1, 2026 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 23–36 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Vision Sense Rover
Abstract: This paper presents the design and implementation of an autonomous obstacle-avoiding robotic system utilizing an Arduino Uno microcontroller, an ultrasonic distance measurement module, a servo-based scanning mechanism, an L298N motor driver module, and an ESP32-CAM for real-time visual monitoring. The proposed system is developed to operate without human intervention, using sensor- driven decision making for navigation. The ultrasonic sensor continuously measures the distance to adjacent obstacles, while the servo motor …
Published in Journal of Microcontroller Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 38–43 Read article
-
Triple-Threat Analysis: Measuring Mythril, Slither and Oyente Against Real-World Smart Contract Vulnerabilities
Abstract: Smart contracts have become fundamental building blocks of blockchain ecosystems, yet their immutable nature makes security vulnerabilities particularly devastating. This pa- per presents a comprehensive evaluation of three prominent static analysis tools—Mythril, Slither, and Oyente—for detecting vulnerabilities in Ethereum smart contracts. Through systematic experimentation with real-world contract categories (voting sys- tems, land registries, and crowdfunding platforms), we quantify the effectiveness of each tool across eight critical vulnerability types, including reentrancy, …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 13, Issue 1, 2025 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
A Dual-Model Deep Learning Framework for Early Alzheimer’s Detection Using Clinical Data and Neuroimaging with Architectural Performance Analysis
Abstract: Alzheimer’s disease (AD) poses a significant global health challenge due to its increasing prevalence and the absence of definitive cures. Early diagnosis is crucial for effective intervention and management. This study presents a dual-model deep learning framework for the early detection and classification of AD using both structured clinical data and neuroimaging datasets. Model 1 utilizes a greedy layer-wise autoencoder approach applied to structured data, achieving optimal binary classification accuracy …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 16, Issue 1, 2026 · pp. 1–12 Read article
-
Performance Evaluation of Green Walnut Husk Waste Extract for Inhibiting Aluminium 8088 Corrosion in Acidic Solution
Abstract: The cumulative call for environmental and supportable corrosion inhibitors has obsessed curiosity in exploiting plant-based agronomic surplus resources. Presented research work discovers the corrosion inhibition probable of green walnut husk extract(GWH)—a normal and plentiful agro-waste—on Aluminium 8088 alloy in an acidic medium. Aluminium 8088, however identified for its corrosion resistance, is vulnerable to squalor in highly acidic settings, affectation trials in several industrial claims. GWH extract act as an ecologically …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 45–59 Read article