Search
522 articles for “tensile property”
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Investigation of Mechanical Characteristics of 3D Printed Composite Materials (Thermoplastic Urethane and Nylon (PA6))
Abstract: 3D printing has emerged as a game-changer, progressively replacing conventional metals and thermosetting polymers, primarily due to its capacity to create lightweight structures with impressive mechanical attributes. The technology's advantages, such as minimized material wastage, design adaptability, and the ability to craft intricate structures, have propelled its widespread adoption. Within the realm of additive manufacturing, Fused Deposition Modeling (FDM) stands out as a technique capable of producing intricate functional components. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 65–76 Read article
-
Al-MMC Foam: Synthesis and Characterisation
Abstract: Aluminium alloy composite foams are produced in the laboratory using TiH2-CaCO3 dual foaming agents. The density of the developed material varied along various cross sections. There exists a more pronounced variation in density along the direction of foaming. Compressive and tensile tests are performed on Aluminium Metal Matrix composite (Al-MMC) specimens of different relative density. The compressive stress-strain response of the material establishes their engineering utility in terms of their …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 18–27 Read article
-
AL6061/Al2O3-Ash Reinforced Composites: An Experimental and Statistical Study Using Ultrasonic Stir Casting
Abstract: This study presents an experimental investigation on the influence of fly ash particle size on the mechanical properties of aluminum alloy (Al6061) composites fabricated through Ultrasonic Assisted Stir Casting. Fly ash, a low-cost and low-density by-product of thermal power plants, has emerged as an effective reinforcement material due to its excellent fluidity, high filling capability, and ease of processing. It has been increasingly utilized in metal, polymer, and rubber composites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1123–1133 Read article
-
INFLUENCE OF PULSED TIG WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY JOINT: A REVIEW
Abstract: The increase use of aluminium alloy in the previous decades in automobile industry have recommended the research towards learning its behaviour in dissimilar condition with application. Pulsed tungsten inert gas (TIG) welding in aluminium alloy is one of the generally utilized method towards manufacturing the car parts. The present work relates to the enhancement of mechanical properties of Aluminium amalgam welds through beat tungsten latent gas (TIG) welding process. Input …
Published in Journal of Industrial Safety Engineering · Vol. 5, Issue 3, 2018 · pp. 13–18 Read article
-
Evaluation of Mechanical Properties of Carbon Reinforced Composite for Different Process Parameters Using FDM
Abstract: Fused Deposition Modeling (FDM) stands as an advanced rapid prototyping technique, widely appreciated for its efficiency in constructing functional components within a reasonable timeframe. In this experimental exploration, a comparative analysis of mechanical properties was conducted on components manufactured through the FDM technique, specifically with a 20% concentration of SCF-PLA. The study considered process variables like layer thickness, infill pattern, and infill density. Employing diverse process parameters, a standard sample …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 218–228 Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Empowering Concrete: Enhancing Strength and Durability with Coal Bottom Ash
Abstract: The utilization of coal bottom ash, an industrial waste byproduct, as a sustainable alternative to river sand in concrete production has gained increasing attention due to environmental concerns and the need for resource optimization. This study examines how incorporating coal bottom ash into concrete mixtures, either partially or entirely replacing river sands, affects different properties. These properties include the workability of fresh concrete, as well as its compressive strength, splitting …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Exploring the Dynamic Mechanical Analysis and Biocompatibility of Compression-Molded PMMA for Biomaterial Applications
Abstract: Metals such as titanium, cobalt, and magnesium are commonly used as biomaterials. However, their use can lead to tissue reactions due to the formation of foreign bodies which may cause blood cancer. Researchers have addressed this issue by substituting biomaterials with polymethyl methacrylate materials (PMMA). The PMMA material being studied is produced using the compression molding technique. This article examines the mechanical properties and biotoxicity of PMMA. These materials have …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 482–499 Read article
-
Effect of Hardfacing on Mechanical Properties
Abstract: A metal working process in which a harder alloying elements are deposited to a softer material the process is called hardfacing or hard surfacing. The life of that part which is hardfaced increases with this process. The present investigation discusses the effects of FeCr, FeV, FeMo, FeMn, C and Ni addition applied on mild steel having carbon content 0.27 using the submerged arc welding process.The effect of these alloying elements …
Published in Journal of Experimental & Applied Mechanics · Vol. 13, Issue 3, 2022 · pp. 18–27 Read article
-
Studies in Effect of Alumina Nanoparticles on the Properties of Unplasticized Polyvinylchloride (PVC)
Abstract: AbstractUnplasticized polyvinylchloride (PVC)/nano-alumina composites were prepared using high- speed mixer, two-roll mills and compression molding. In the composite, the concentration of nano-alumina was varied from 0 to 7 phr (parts per hundred). The prepared composites were characterized for mechanical, thermal, electrical, crystallinity and morphological properties. Optimal improvement in properties was obtained at 5 phr concentration of nano-alumina in the PVC matrix. Tensile strength, tensile modulus, flexural strength, flexural modulus and …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 27–34 Read article
-
Experimental Investigation on Mechanical Properties of Concrete Replacing of Steel Slag as Coarse Aggregate
Abstract: The basic objective of this study was to identify alternative source of good quality aggregate which is depleting very fast due to the fast pace of construction activities. This paper describes the optimum level of replacement of Energy Optimized Furnace (EOF) steel slag by weight of coarse aggregate for a mix proportion of M20 grade concrete to find out the optimum ratio of steel slag. Civil Engineers have been challenged …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 44–49 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
Fracture behavior of 2124Al- 10vol% SiCp composite tensile specimens for different heat treatment conditions
Abstract: This article presents experimental details on 2124Al-10vol% SiCp composite tensile specimens, which were made by squeeze casting process. Cast metal composites are generally very brittle and have poor mechanical properties. To strengthen the matrix and improve ductility, the specimens were heat-treated by solutionizing and aging. Experiments were carried out at 3 different solutionizing temperatures, solutionizing time, aging temperature and aging time to examine the influence of heat treatment process parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 279–291 Read article
-
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel
Abstract: Cr-Mo-V based low alloy steels are widely used in thermal power plants because of their ability to withstand elevated temperature and high pressure under continuous operation. With ferrite-pearlite and/or ferrite-bainite microstructures, these steels find their applications in boiler tubes, pressure vessels and steam turbines. Being cost effective is one of the important factors, which draws attention of many industrialists towards low alloyed steels over highly alloyed steels with austenitic matrix. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 7–14 Read article
-
Effects of Halloysite Nano particle Reinforcement of Epoxy Composite Using a Diglycidyl ether of bisphenol-A Prepared by Ultrasonication Casting
Abstract: This study explores a simple and operative approach for developing stronger epoxy-based composite materials by incorporating halloysite nanotubes (HNTs). The composites were made-up through hydraulic compression casting, combining ultrasonic mixing with applied pressure to produce consolidated composite sheets. HNTs were added to the epoxy resin at concentrations ranging from 1 to 5 wt.% at approximately 60°C, and the subsequent composites were examined to understand their internal structure, nanotube dispersion, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
TO STUDY PROPERTIES OF CONCRETE BY USING MANGANESE ORE AGGREGATE
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article