Search
838 articles for “and Mechanical Properties”
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Advancements in Material Design and Motion Control: Integrating Additive Manufacturing, Fused Deposition Modeling, and Precision Systems in Modern Applications
Abstract: The interaction between material design, mechanical properties, and advanced motion control systems is vital in a range of engineering domains, including robotics, electronics, and manufacturing. This article examines two key areas: the mechanical properties and design of cutting-edge materials, focusing on composites, polymers, ceramics, and fibers, and the integration of advanced motion control systems in hand-held electronic and photographic devices. The first section delves into the mechanical behavior of various …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 26–30 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium
Abstract: Friction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and magnesium. These metals, renowned for their exceptional properties such as ductility, thermal conductivity, low density, and impressive weight-to-strength ratios, find wide utility across numerous industrial sectors. However, traditional fusion welding methods often struggle to effectively join aluminum and magnesium due to their disparate physical and chemical characteristics. FSW …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 134–142 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article
-
Process Parameter Optimization of Magnesium Alloy Material Welded by Friction Stir Welding Using UTM and Taghuchi Approach
Abstract: Welding is a fabrication process where materials are fused together which may similar or dissimilar according to requirement. Welding is a systematic approach where dissimilar and similar materials are welded with an application of heat. Friction stir welding (FSW) is a welding method where metals are converting to a molten phase and with a desirable application of pressure leads to metal joining. FSW is a metal joining process used in …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 381–392 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Biomimetic Approaches to Damage Tolerance: Lessons from Natural Materials
Abstract: Biomimicry has emerged as a powerful and innovative strategy for designing materials with enhanced damage tolerance by drawing inspiration from biological systems found in nature. Various natural materials, such as bone, nacre (mother-of-pearl), and spider silk, display exceptional mechanical properties, including high toughness, superior strength, and inherent self-healing capabilities. These remarkable attributes arise from their complex hierarchical architectures and adaptive mechanisms, which have been refined over millions of years through …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 11–16 Read article
-
Unraveling Mixed Ionic-Electronic Conduction in Lithium-Substituted Rubidium Tetra Titanates via Dielectric Spectroscopy and EPR Analysis
Abstract: Lithium-substituted Rubidium Tetra Titanates with varying concentrations of lithium carbonate (Li₂CO₃) — specifically 0.01, 0.05, and 0.1 molar percentages — were successfully synthesized using a conventional high-temperature solid-state reaction method. The resulting compounds follow the general chemical formula Rb₂₋ₓLiₓTi₄O₉. X-ray diffraction (XRD) analysis confirmed that lithium ions were successfully incorporated into the crystal lattice without disrupting the fundamental layered structure of the host material. The crystal system remained monoclinic across …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 2, 2025 · pp. 19–29 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
A Review on Properties of Natural Fiber Reinforced Composite Materials for Automotive Application
Abstract: The use of composite polymer matrix materials is growing rapidly in automotive, marine and aerospace applications due to their light weight and recyclable properties. In the automotive industry, the use of polymer matrix for interior panels, trims, exterior panels and fender assemblies is rapidly increasing in the 21st century. It also stimulates the use of polymer compounds reinforced by natural fibers. Natural fiber polymer composites are a growing industry due …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 915–922 Read article
-
Effect of Carbonyl Iron Particle Concentration on The Printability and Stiffness of Magnetorheological Elastomer Filaments
Abstract: Magnetorheological elastomer (MRE) are increasingly valued for their field-responsive mechanical properties, making them ideal for adaptive components in automotive, aerospace, and vibration control systems. However, conventional mould-based fabrication methods limit design flexibility, produce excess material waste, and are unsuitable for complex or customized geometries caused challenges that have hindered broader industrial adoption. Although 3D printing offers a compelling alternative, research on printable MRE filaments remains limited, particularly regarding how carbonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 310–317 Read article
-
Unsaturated Polyester Resin and Rice Husk Composites
Abstract: Plastic is a very useful and important part of human beings but it is quiet harmful to environment. The increasing demand for the eco-friendly material is growing interest towards the field of Composites. The Natural composites of Styrene Diluted Unsaturated Polyester resin are made. Various natural materials are used to make different composites. This study includes Rice Husk Composite of SDUPR. There are many methods to prepare composites. Methods such …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 76–84 Read article
-
Impact of Layer Height and Infill Line Orientation On 3D Printed Components Produced Via Additive Manufacturing
Abstract: Additive Manufacturing (AM) is an extrusion-based technique used to create objects by extruding semi-molten material through a nozzle of specific dimensions. Materials like acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polycarbonate (PC), and others are commonly employed in this process to manufacture industrial components. The mechanical properties of engineering component are critical for various industrial applications. This study investigates the impact of additive manufacturing on fabrication, considering different process parameters. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 315–323 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
An Ultraviolet-Curable Nano Cerium Oxide Coating and Its Anti Ultraviolet /Blue Light Properties
Abstract: An ultraviolet (UV)-curable nano cerium oxide (CeO2) coating with enhanced blue light and UV shielding properties, prepared using an ultrasonic blending method, is presented. This study systematically investigated the optimal synthesis conditions for nano CeO2, as well as the effects of UV intensity and CeO2 concentration on the curing kinetics and blue/UV light shielding performance of the UV-curable nanocomposite. The results indicate that the synthesized nano CeO2 exhibited improved mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–324 Read article