Search
418 articles for “Bond”
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Sustainable Polymer Composites Reinforced with Natural Fibers: Processing, Properties, and Applications
Abstract: The environmental footprint of synthetic plastics has led to extensive studies of sustainable polymer composites reinforced with natural fibers like jute, sisal, hemp, flax, and coir. These biocomposites offer a greener solution to the conventional petroleum-based materials, which blends biodegradability and competitive mechanical characteristics. The present paper focuses on the processing methods, mechanical and thermal characteristics, and the possible application of natural fiber-reinforced polymer composites (NFRPCs). A survey of 50 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1663–1670 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article