Search
491 articles for “surface properties”
-
Performance Enhancement of Microstrip Patch Antenna Using Metasurface
Abstract: Performance enhancement of microstrip patch antenna using metasurface provides a thorough analysis of how a metasurface integration technique might improve the performance of a microstrip patch antenna. The 4×4 array of square components metasurface measuring 51.6 × 51.6 × 3.1016 mm is merged with the microstrip patch antenna, which has dimensions A=13.5 mm, B=12 mm, and C=1.2 mm. The radiation box dimensions (100 mm × 100 mm × 55 mm), …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 20–27 Read article
-
Thermodynamic Analysis and Slow Pyrolysis Product Characterization are Used to Assess Rice Straw for Bio-char Production
Abstract: This work explores the viability of using slow pyrolysis to produce bio-char using rice straw as a feedstock. The objective is to characterize the resulting bio char and analyse the thermodynamic processes involved in its formation. Rice straw, an abundant agricultural residue, was subjected to slow pyrolysis under controlled conditions. The produced bio char was characterized using various analytical techniques, including scanning electron microscopy, elemental analysis, and surface area measurements. …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 13, Issue 2, 2024 · pp. 26–29 Read article
-
An Experimental Investigation on the Determination of Critical Micelle Concentration (CMC) Of Various Surfactants Using the Surface Tension Method
Abstract: This study primarily focuses on the experimental investigation for determining the critical micelle concentration (CMC) of various surfactants that are commonly employed to enhance the stability of nanoparticles in base fluids. In this context, three surfactants belonging to the anionic category—Sodium Dodecyl Sulfate (SDS), Sodium Lauryl Sulfate (SLS), and the bio-surfactant Rhamnolipid—were selected, along with one non-ionic polymer, Polyvinylpyrrolidone (PVP), which is used as a surfactant. The CMC of each …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 145–153 Read article
-
An Overview on Microwave Remote Sensing for Earth Observation
Abstract: To understand the Earth from space, one must look beyond the visible eye. While optical satellites rely on the Sun’s reflection much like the human eye they are frequently blinded by the curtain of cloud cover, smoke, or the dark veil of night. To bypass these limitations, we turn to Microwave Satellite Sensing. By utilizing electromagnetic waves with wavelengths ranging from 1 millimeter to 1 meter, we can see through …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 15, Issue 1, 2026 · pp. 21–25 Read article
-
Phytochemical, Pharmacological and Unani Traditional Uses of Mazoo (Quercus infectoria): A Review
Abstract: Quercus infectoria (Family: Fagaceae) generally recognized as gall oak, is a trifling shrub originate in Greece, Asia Minor and Iran is predictably assumed to have enormous therapeutic status. There are two varieties of mazoo; one is solid type with no hole on its surface and another is light weighted hold cavity inside and hole on its surface but solid type is medicinally better. Pharmacologically, various animal and human studies have …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 9, Issue 1, 2020 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Impact of Shape, Size and Crystal Structure on Vacancy Related Properties of Gold Nanoparticles
Abstract: It is necessary to consider defects to explain the electron movement, thermal transport and mechanical properties of materials. In the present study, a simple quantitative model for cohesive energy of nanoparticles is extended to determine the size, shape and crystal structure effect on vacancy formation energy, vacancy entropy, and vibrational frequency in free surface Au nanoparticles. Vacancy entropy variation with size has been studied for spherical, regular octahedral, regular hexahedral …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 223–229 Read article
-
Investigation of Mechanical Properties of Friction Stir Welded AA6063 Joints
Abstract: Friction Stir Welding is often referred as the joining technology of next generation because of its multiple advantages over the existing conventional processes. It is a solid state joining process which is free from the requirement of filler wire, consumable material, harmful gaseous emissions and also provides smooth surface with better surface finish. Moreover since no third additive material is involved hence, the microstructure of the welded joint also bears …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 2, 2017 · pp. 1–4 Read article
-
Enhancing Surface Roughness of Polylactic Acid (PLA) 3D-Printed Parts Using CO₂ Laser Scanning: An Experimental Study on Parameter Optimization
Abstract: Fused deposition modeling (FDM) of polylactic acid (PLA) often suffers from poor surface finish due to the inherent layer-by-layer deposition process, limiting its use in high-precision applications. This study investigates CO₂ laser scanning as an efficient post-processing technique to reduce the surface roughness (Ra) of PLA parts while maintaining structural integrity. Specimens (100 × 80 × 5 mm) were fabricated with varying infill densities (35%, 70%, and 100%) to assess …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 503–511 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Studies on Nanostructured Nickel Thin Film Coatings Deposited using Pulsed DC Magnetron Sputtering Process
Abstract: The purpose of this research work is to investigate the mechanical properties of nickel thin film. The nickel thin films were coated on glass substrate using pulse PDC power supply magnetron sputtering process in argon atmosphere. The effect of substrate temperature, effect of duty cycle and mechanical properties of nickel thinfilms has been presented in this paper. Coating deposited with substrate temperature at 250°C, had lower surface roughness (Ra<3 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 1, 2015 · pp. 8–14 Read article
-
Evaluation of Critical Crack Position on the Curved Surface under Mechanical Load: FEA Approach
Abstract: Abstract: Influence of initial crack position on the stress distribution around the crack tip is always taken into account for the failure analysis of metallic structures. Evaluation of Stress Intensity Factor for cracks of various orientations was carried out using Finite Element Analysis technique. These Stress Intensity Factors were used to calculate energy release rate for the various orientations. Next, thus obtained energy values have been compared with energy values …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Estimation of Mechanical Properties of Kevlar/Basalt Intrawoven Composite Laminates Containing Nanoparticles
Abstract: Purpose: The research describes estimation of various Mechanical properties like compression, tensile, shear and impact strength of Kevlar/Basalt (KB) Intrawoven 1×1 composite laminates, each comprising 1%, 3% and 5% of Al2O3 (Aluminium oxide) nanoparticles. Design/methodology/approach: These are woven with the help of manual handloom weaving machine, compression moulding technique was adopted for the fabrication of hybrid composite laminates. Attempts have been made to analyse the mechanical properties of Kevlar/Basalt intrawoven …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–12 Read article
-
Study of Physical and Chemical Properties of Heavy Waxy Crude Oil from Cambay Basin Using Rheometer and Cross-Polar Microscope
Abstract: Production of heavy crude is quite difficult as the pressure drops from reservoir to production facility are quite large. This often leads to the precipitation and deposition of common organic solids (paraffin). These solids may deposit on surfaces, collect in low-energy regions or increase the effective viscosity of the flowing fluid. The net effect is an increase in pressure drop for a given rate through reduction in flowing area or …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 12–18 Read article
-
Metal corrosion prevention control with uses of sol-gel coatings
Abstract: The potential for sol-gel generated films to replace methods for pre-treating metal surfaces with chromate is very high. Metallic and organic paint can be painted on with good adherence thanks to inorganic sol-gel generated coatings. Their significant crack-forming propensity prevents them from offering appropriate corrosion protection. A thicker, more flexible, functionalized film is produced with improved compatibility to various organic top coatings when an organic component is added to an …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 22–26 Read article
-
Novel Catalytic Strategies for Reducing Residual Stresses and Improving Surface Quality in Machined Ceramic Materials
Abstract: To prepare for material cutting and utilize utility-specific edges, it’s crucial to understand the inherent brittleness of ceramics. This brittleness limits the forming methods available and hinders achieving dimensional accuracy and precision through conventional machining techniques. The fabrication of composite materials is becoming increasingly significant, particularly in technical fields like the automotive industry, where they are used to manufacture engine connecting rods, propeller shafts, brake discs, and more. The machining …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 2, 2024 · pp. 01–07 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article
-
Qualitative and Quantitative Effects of Non-Thermal Atmospheric Pressure Plasma and ErCr: YSGG Laser Activation on Surface Remineralization and Fluoride Release of Three Different Fluoride Varnishes
Abstract: Dental caries remains a prevalent oral health concern worldwide, prompting ongoing research into innovative approaches for caries prevention and management. This experimental investigation endeavors to conduct a comparative assessment of the bioactivity, fluoride release kinetics, shear bond strength, and compressive strength of glass ionomer cement (GIC) augmented with three distinct types of inorganic bioactive nanoparticles. Bioactive nanoparticles have garnered interest in dental materials for their potential to enhance material properties …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 292–303 Read article
-
Comparative Study of Structural, Optical, Morphological, and Magnetic Properties of BifeO3 Nanoparticles Synthesized Via Green and Chemical Methods
Abstract: BiFeO3 nanoparticles were synthesized via a green route using Strychnos nux-vomica leaf extract and a conventional chemical sol–gel method to study the effect of synthesis routes on their properties. XRD analysis confirmed phase-pure rhombohedral BiFeO3 for both samples. FTIR analysis was carried out to confirm the formation of the perovskite structure and to detect surface functional groups. FESEM analysis indicated a significant effect of phytochemicals in controlling particle growth and …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 1–8 Read article
-
Polymer Chemistry-Guided Development of Biomimetic Composite Scaffolds
Abstract: Polymer chemistry plays a fundamental role in advancing biomaterials for anatomical tissue engineering, particularly in the design of composite scaffolds that replicate the intrinsic characteristics of native tissues. The regeneration of damaged tissues, especially within anatomically complex structures such as bone, cartilage, and skin, necessitates biomaterials that closely emulate the hierarchical architecture and biological functions of native extracellular matrices (ECMs). The capacity to replicate both mechanical and biochemical cues of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 7–13 Read article