Search
237 articles for “Tensile Test”
-
Development of strontium ferrite/polyamide 12 and neodymium iron boron/polyamide 12 composites using additive manufacturing
Abstract: Polymer matrix composite materials with magnetic properties obtained by the addition of micron-size particles of neodymium iron boron (NdFeB) and strontium ferrite for fused filament fabrication (FFF) are becoming attractive because of their potential applications in the health and automotive industries. Additionally, the design flexibility and low cost of additive manufacturing processes encourage the scientific community to create the materials and understand the properties of the parts obtained with such …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 2, 2025 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Evaluating the Structural Performance of Concrete with Partial Replacement of Fine Aggregate by Plastic Waste
Abstract: This work evaluates the performance of concrete incorporating plastic waste as a partial replacement for fine aggregate, at replacement levels of 0%, 5%, 10%, 15%, and 20%. Various tests were conducted on fresh and hardened concrete to assess workability, strength, and durability. The slump cone and compaction factor tests were used to measure workability, yielding a slump range between 25–30 mm and a compaction factor of 0.98, indicating medium workability. …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 69–75 Read article
-
Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications
Abstract: Additive Manufacturing (AM) is an advanced fabrication process capable of producing complex and intricate components to meet diverse industrial and customer demands. For small-scale producers and researchers, FDM is the most straightforward, affordable, and easily accessible of the several AM processes. The majority of conventional polymer feedstocks used in FDM lack sufficient mechanical strength and thermal stability, which limits their use in load-bearing or structural components. This effort aims to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 743–751 Read article
-
Influence of Rice Husk Ash and Granite Powder on Strength Properties of Concrete
Abstract: Concrete is the mostly utilised material in the field of Civil Engineering. As its consumption is huge in amount and so the scarcity of the raw materials has become a major issue. The important components of concrete are binding material along with the aggregates. Alternative materials are chosen for the replacement of cement to achieve sustainable concrete. Along with cement replacing materials, reusable wastes are also adopted to utilise in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 133–138 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
POLYMER AND COMPOSITE-BASED GEOSYNTHETIC REINFORCEMENTS FOR SEISMIC STABILITY OF SOIL RETAINING STRUCTURES: MATERIALS, MECHANICS, AND PERFORMANCE REVIEW
Abstract: Geosynthetic materials based on polymer and composites have become important items for the structural performance and seismic resilience of the reinforced soil retaining systems. Mechanically stabilized earth walls in recent geotechnical engineering practice are increasingly based on enhanced polymeric reinforcements for enhanced tensile strength, durability, flexibility, and energy dissipation under dynamic loading. High-density polyethylene, polypropylene, polyester, and fiber-reinforced polymer composites are usually used. The present review focus on the recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
The Convergence of AI and Composites - A Review Anchored in Patent Trends
Abstract: The integration of artificial intelligence (AI) and machine learning (ML) techniques is revolutionizing the design, analysis, and optimization of polymer (PC/FRP), metal (MC), and ceramic matrix composites (CC). Techniques such as artificial neural networks (ANN), deep learning (DL), genetic algorithms (GA), and physics-informed machine learning (PIML) are employed to enhance property estimation, process optimization, and predictive modeling. These AI-driven frameworks enable virtual testing, application-specific material design, and real-time decision-making, while …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 182–198 Read article
-
Investigation of Process Specifications on Friction Stir Welded Aluminium 5083 and 6082 Alloys
Abstract: Aluminium 5083 alloys were mainly used for naval based applications because of better corrosion resistance feature. Similarly aluminium 6082 alloy being a structurally significant material found its applications in construction sector. Fusion welding of these two heterogeneous alloys is bit hard, since it evolves many defects. Present Investigation deals with two cases of distinct alloys through FSW process. Case 1 represents 31 experimental trails performed by 5 various tool pin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Experimental Analysis and Design Proposal of Banana Fiber Reinforced Polymer Composites and Computer Analysis
Abstract: This study presents a comprehensive experimental investigation and design model development using banana fiber reinforced polymer (BFRP) composites. The primary aim is to evaluate the mechanical and physical performance of the composite, with particular emphasis on tensile strength, flexural strength, and water absorption characteristics. These properties are critical for applications in industries such as transportation and construction, where durability, lightweight materials, and cost-effectiveness are essential. Banana fibers, being natural, renewable, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 901–907 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article