Search
218 articles for “heat conductivity”
-
Study and Analysis of Polymer / Composite Thermal Insulation Material and Comfort Based Building Simulation with Applicability of Evaporative Cooling
Abstract: In India, about 35% of India's electrical energy is absorbed by buildings. Of this, the significant consumption is for the cooling purpose in building. Passive cooling systems, by comparison consume considerably less energy than mechanical cooling systems. Therefore, it is very important to understand the applicability of the passive cooling system by conducting comfort-based simulation of building as well as an examination of the influence of thermal insulation composed of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 21–29 Read article
-
Studying the Effectiveness of Solar Thermal Collectors Using Nanofluid
Abstract: Energy plays a crucial role in the technological growth that humanity is now experiencing. However, new avenues for energy generation and consumption have also been made possible by this advancement in science and technology. Another major factor driving up energy needs is an increase in population density. Carbon footprints are being left on the environment by fossil fuels, which are running out more quickly. Dependence on renewable energy sources, which …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 35–41 Read article
-
Properties and Recent Progress in Oxide-Based Thermoelectric Materials
Abstract: Advanced thermoelectric materials that can be used efficiently for energy conversion have received significant research interest for the last decade because of the mounting demand for sustainable and eco-friendly energy technologies. The main advantage of thermoelectric materials is their capability to directly convert the waste heat into electrical energy which makes them highly promising for the recovery of waste heat from industrial processes, automotive systems and power generation applications. Oxide-based …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
Injection Pressure Optimization for Non-edible Biodiesel Blends in CRDI Engines: A Comparative Study
Abstract: The growing demand for clean and sustainable energy has increased interest in biodiesel produced from non-edible oil sources. These fuels are renewable, biodegradable, and do not compete with food resources. However, the effective use of biodiesel blends in modern diesel engines requires proper control of fuel injection parameters, particularly injection pressure. In common rail direct injection (CRDI) engines, injection pressure strongly influences spray formation, air–fuel mixing, combustion behaviour, and exhaust …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 2, 2025 · pp. 24–34 Read article
-
Optimizing Power Generation from Building Ventilation Systems: A Study on Exhaust Fan Efficiency
Abstract: Due to population growth, the world's energy consumption has increased dramatically in both wealthy and developing nations in recent years, and by 2042, it is predicted to have doubled or more. Since a few years ago, the use of innovative sustainable power sources to meet energy demands has been gradually increasing. We've chipped away at a different idea because of this. As an alternative energy source, renewable energy (RE) resources …
Published in International Journal of Electrical Power and Machine Systems · Vol. 1, Issue 2, 2023 · pp. 22–27 Read article
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Effect of Tareeq (Sweating) to Control the Progress of Samane Mufrat (Overweight/Obesity) – A Study
Abstract: Samane Mufrat (obesity) is a chronic and increasingly common disease characterized by excess body fat. It occurs due to decrease in hararate ghareezia (innate heat). It is more prevalent in women because of their barid mizaj (cold temperament). The shaham wa sameen (fats) are barid ratab (cold wet), so they accumulate in barid mizaj individuals. A loss of 5% to 10% of body weight of obese has been shown to …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 1, Issue 1-3, 2012 · pp. 72–76 Read article
-
Fitting Relative Permeability’s Curves Based on Laboratory Production Data for A Thermal Composite Core Flooding Experiment
Abstract: Numerical simulators are effective tools for an adequate understanding of models geological and dynamic properties under which enhanced oil recovery techniques are investigated. Core flooding experiments are usually conducted for calibrating simulated rock and fluid properties against actual test results at micro-scales, and for further scaling up processes to the reservoir scale. In this paper, laboratory experiments data were used as input for a numerical simulator to study the effect …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 41–56 Read article
-
Electro-chemical treatment of graphite oxide: preparation and Characterization of high quality Graphene material
Abstract: With the enlargement of flexibility and suitability in material industries, high-performance thermal management materials are demanded with high thermal conductivity and electrical insulation are growing. In recent years, graphene has received a numerous focus from science community due to its high thermal conductivity and electrical insulation. Fabrication of light weight graphene and its derivatives as graphene Oxide (GO) and reduced graphene oxide (rGO) via facile processing method is yet a …
Published in Journal of Polymer & Composites Read article
-
Electro-chemical treatment of graphite oxide: preparation and Characterization of high quality Graphene material
Abstract: With the enlargement of flexibility and suitability in material industries, high-performance thermal management materials are demanded with high thermal conductivity and electrical insulation are growing. In recent years, graphene has received a numerous focus from science community due to its high thermal conductivity and electrical insulation. Fabrication of light weight graphene and its derivatives as graphene Oxide (GO) and reduced graphene oxide (rGO) via facile processing method is yet a …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–36 Read article
-
Enhancing Mechanical and Thermal Performance of M30 Concrete with Carbon Fibre Reinforcement
Abstract: This study examines the influence of carbon fibre incorporation on the mechanical properties of M30-grade concrete. A series of experimental investigations were conducted to assess the effects of varying carbon fibre content on compressive, split tensile, and flexural strengths. The results indicate a significant enhancement in mechanical performance with the inclusion of carbon fibres, with the optimum fibre dosage identified as 0.75%. At this content, the concrete achieved a peak …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 252–260 Read article
-
Short Review on Lubrication Coatings and Reduction in Friction
Abstract: Specialized Epoxy coatings with a low coefficient of friction can be applied to metal, glass, and plastic substrates. They produce long-lasting, slick surfaces that prevent wear and abrasion. These friction compounds are corrosion-resistant, chemically inert, and simple to maintain. Products are made to cut down on repair costs and increase element life. The coating is just a protective layer that is put to an object's surface, also known as the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 28–32 Read article
-
New Integral Processes Enrichment of Moroccan Oil Shale using Mineral and Hydrometallurgical Methods
Abstract: In this work, we increase the calorific value of Moroccan oil shale, which is the main element in the combustion of fossil fuels. In particular, we consider the shale of Timahdit, enriching it by hydrometallurgical and mineral processing methods in order to use it to generate thermal and electrical energy. Although different studies have been conducted for the development of Moroccan oil shale, but they have not dealt with the …
Published in Journal of Petroleum Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 28–36 Read article
-
Development of a Self-Cleaning Mechanism for Solar Panels to Enhance Efficiency
Abstract: On Earth, solar energy is the most plentiful source of energy. As it happens, the heat generated by the fusion of helium on the outermost part of the Sun additionally happens to be renewable. This energy is becoming popular because of natural advantages. In digital circuit design, AI can aid in logic synthesis and analog circuit design, AI can help in sizing transistors. The tools used to transform daylight into …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 1, 2024 · pp. 1–10 Read article
-
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
Abstract: In machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain as low as possible. In this study, a dual nozzle Vortex Tube Cooling System (VTCS) that supplies cool compressed CO2 gas is developed to reduce the cutting temperature in Ti-6Al-4V machining. The experiments were conducted at constant cutting and flow parameters during turning at different levels of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 284–291 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process
Abstract: Aluminium-copper dissimilar joints are applicable to electrical industry. 2 mm thick aluminium alloys (A1100) sheet is joined to 1 mm thick copper (Cu-DHP) sheet using tungsten inert gas welding (TIG) process. The effect of process parameters like heat input, torch orientation, arc weaving on mechanical properties of the joint are studied. In this combination the molten pool generated by melting of aluminium edge will wet the coppersurface to form a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 15–20 Read article
-
Performance and Exergy Loss Analysis for a Single Slope Solar Still Using PMMA
Abstract: A solar still constructed using polymethyl methacrylate (PMMA) represents an improved approach to solar desalination, in which conventional materials such as metal or concrete are substituted or reinforced with PMMA- based composites PMMA sheets are often used as the transparent glazing cover of the solar still instead of glass. It allows maximum solar radiation to pass into the basin, heating the saline/brackish water effectively. A tubular solar still made from …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 799–807 Read article
-
INVESTIGATION OF THERMAL CONDUCTIVITY OF SILVER NANOPARTICLES IN BASEFULID OF WATER ETHYLENE GLYCOL
Abstract: Nanotechnology is interface technologies that span many different science and applications area.When engineering, science and technology are conducted at the nanoscale is called asnanotechnology. It is about 1 to 100 nm (nano-meter) where nano denotes the scale range of onebillionth of meter. Nanotechnology refers the properties of atoms and molecules measuring 0.1 to1000 nm. Nanofluids are nothing but suspension of nanometer sized particles in the base of fluid.The base fluid …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 13–19 Read article
-
Assess the Knowledge Regarding Usage of Plastic Leading to Cancer Risk and Their Preventive Measures Among House Wives in Selected Area Vaniyamkulam
Abstract: This study explores the level of awareness among housewives in Vaniyamkulam about the potential cancer risks associated with the use of plastic materials in households, along with their knowledge of preventive measures. The proliferation of plastic usage in daily life has raised significant health concerns, particularly its potential to release carcinogenic compounds such as bisphenol A and dioxins, which can leach into food and beverages. Given the critical role housewives …
Published in International Journal of Oncological Nursing and Practices · Vol. 2, Issue 1, 2024 · pp. 12–17 Read article