Search
173 articles for “elemental composition”
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
THE THICKNESS EFFECT ON TiO 2 THIN FILMS FABRICATED BY USING SOL- GEL DIP COATING METHOD
Abstract: Titanium dioxide films were prepared by sol-gel dip-coating technique onto glass substrates at room temperature. The study focuses on the structural pattern of TiO 2 films which were dominated by the parameters such as the film thickness, pH, annealing temperature and number of dipping layers. At first the dipping speed is optimized with the refractive index of the film along with the number of dipping layers. Then the film deposited …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 1–10 Read article
-
Optimization of Lightweight Polymer Composites Using Finite Element Analysis Machine Learning and Topology Optimization Techniques for Aerospace Applications
Abstract: The advancement of aerospace engineering depends on lightweight polymer matrix composites (PMCs) because they help decrease weight while improving fuel efficiency and payload capacity together with increased structural integrity. Research developed a computer program comprising FEA with ANN and TO optimize high-performance PMCs through integrated design approaches. The combination of Python-controlled LS-DYNA simulations measured hybrid composite laminate resistance to impact while an ANN model obtained data from simulations to forecast …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 693–709 Read article
-
Study of Experimental and Finite Element analysis of Composite Mudguard for Performance Enhancement with Existing Material
Abstract: Two wheelers sale is creasing in India with drastically level So, this results into increase competition in Competition in this segment has made the two-wheeler OEM to manufacture product at low cost without comprising its performance. Vibration Analysis is modern method to evaluate the life span of components performing vibration, therefore we can manufacture component with alternative material within less time. Front mudguard is a styling component generally made with …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 33–42 Read article
-
Behaviour of Tri-Directional Advanced Composite Beam Using Finite Element Method
Abstract: The present work shows the modal analysis of tri-directional advanced composite beams using the finite element method. The mechanical parameters of the beam are supposed to vary in the direction of beam length (x), width (y), and thickness (h). In this work material parameters are assumed to vary according to the exponential rule of functionally graded material. To authenticate the accuracy of the present work, the result with a particular …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 610–620 Read article
-
Free Vibration of Curved Sandwich Beams with Laminated Composite Facings Using Finite Element Method
Abstract: The present work is focussed on the free vibration analyses of singly curved sandwich beams using three-dimensional finite element method in ABAQUS software. Three different layers are considered for soft core and stiff face sheets in ABAQUS solid modelling to accurately represent the effects of transverse shear deformation of sandwich structure. To validate the model, obtained natural frequencies from present model are first compared with the results available in the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 549–561 Read article
-
Fracture Analysis of Laminated composite plates using Extended Finite Element Method: A Review
Abstract: Laminated composite plates are used in aerospace, automotive, and marine industries. They feature great durability against fatigue, a high strength-to-weight ratio, and mechanical attributes that may be altered. However, they are prone to fracture and delamination under complex loading, requiring accurate fracture analysis for structural integrity. Traditional finite element methods (FEM) need extensive mesh refinement for modelling crack propagation which increases the computational costs. The Extended Finite Element Method (XFEM) …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 16–25 Read article
-
BUCKLING ANALYSIS OF COMPOSITE CYLINDRICAL SHELL STRUCTURE USING FINITE ELEMENT ANALYSIS
Abstract: When designing cylindrical shells one should consider not only the strength problem in service, but also the buckling problem. Cylindrical shells such as thin-walled structures are susceptible to buckling when subjected to static and dynamic stresses. The vessels are exposed to dynamic sea conditions depending on their usage. The functional failure of a pressurized composite vessel or a composite pipe in the form of leakage or weeping of the contained …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 32–36 Read article
-
Effect of Sinusoidal and Inverse sinusoidal Load on the Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and invers sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 Read article
-
Effect Of Sinusoidal and Inverse Sinusoidal Load on The Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and inverse sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 72–84 Read article
-
Design Strategies of Polymer Composite Components for Sustainable Renewable Energy Microgrids
Abstract: Increasing power demand and variable performance requirements in renewable-energy systems motivate integrating advanced polymeric and composite materials into microgrid components to improve reliability and performance. This paper presents a design and control framework for a standalone microgrid that couples power-electronic and energy-conversion subsystems with polymer-composite–based components to enhance durability, thermal management, and electromagnetic shielding. The microgrid uses a doubly fed induction generator (DFIG) for wind generation to enable independent active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 63–71 Read article
-
Finite Element Analysis (FEA) Based Design of a Brake Master Cylinder with Varied Materials
Abstract: This research article deals with the Finite Element Analysis (FEA) based design of the brake master cylinder of different materials. The brake master cylinder is considered as the most significant component in almost all passenger cars equipped with a hydraulic braking system. The brake master cylinder came under the control and safety category components and is popularly considered to be the heart of the braking system. It must be designed …
Published in Journal of Automobile Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 1–16 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Green Synthesis and Functional Evaluation of Ag–Polypyrrole/TeO2 Nanocomposites for Advanced Electronic Applications
Abstract: Ag–PPy/TeO₂ nanocomposites with TeO₂ loadings ranging from 2% to 10% were synthesized using an in-situ chemical polymerization method. Green tea extract, rich in phytochemicals, acted as both a reducing and stabilizing agent to facilitate the formation of metal oxide nanoparticles. The structural and morphological characteristics of the nanocomposites were analyzed using FTIR, PXRD, and SEM techniques. FTIR confirmed the successful integration of Ag, TeO₂, and PPy functional groups. PXRD patterns …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 64–76 Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Characterization Techniques for Thin Film Coatings Based on SiO₂, TiO₂, and ZrO₂
Abstract: Thin film coatings made from silicon dioxide (SiO₂), titanium dioxide (TiO₂) and zirconium dioxide (ZrO₂) have attracted great interest owing to their excellent optical, electrical, mechanical and chemical properties. These oxide thin films are widely used in microelectronics, solar cells, sensors, biomedical devices, photocatalysis, anti-reflective coatings and protective layers. The structural, morphological, compositional, optical and mechanical properties of these coatings are closely related to their performance and reliability. Therefore, thorough …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Hybrid Machine Learning and Finite Element Framework for Predicting Damage Behavior in Fiber-Reinforced Polymer Composites
Abstract: Fiber Reinforced Polymer (FRP) composites have broad spread use in aerospace, automotive, marine and structural applications due to its high specific strength, stiffness and corrosion resistance. The various damage mechanisms such as matrix cracking, fiber breakage, delamination and interfacial failure, however, make the forecasting of damage particularly complex. In this work, a hybrid machine learning (ML) and finite element (FE) system is proposed for predicting the damage behavior of FRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article