Search
81 articles for “combustion”
-
Solid acidity of MoO3 synthesized by solution combustion method and acetalization of formaldehyde using it
Abstract: MoO 3 nanoparticles were synthesized via solution combustion approach. Ammonium nitrate was used as oxidant and ammonium molybdate as fuel in combustion reaction. XRD, FTIR and Raman spectroscopy results showed that MoO 3 nanoparticles were successfully synthesized by the solution combustion reaction. The SEM analysis showed that synthesized MoO 3 nanoparticles have rod-like shape with width and thickness of 50-200nm and length of 0.2-1μm, respectively. The XRD pattern and morphology …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 01–09 Read article
-
Advances in Pipe Flow Systems, Turbulence, and Combustion Processes in Fluid Mechanics
Abstract: Fluid mechanics plays a critical role in the design and optimization of engineering systems involving fluid transport, energy conversion, and thermal processes. This review presents recent advances in pipe flow systems, turbulence behavior, and combustion processes, highlighting their interdependence in modern applications. Pipe flow systems are essential in industries such as water distribution, oil and gas transport, and chemical processing, where flow characteristics are influenced by factors such as pressure, …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 1–7 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Performance, Emission, and Combustion Evaluation of Chlorella Vulgaris Biodiesel-Diesel Blends in a Compression Ignition Engine
Abstract: This study examines, without modifying the engine, the performance, emissions, and combustion properties of biodiesel blends made from Chlorella vulgaris microalgae in a four-stroke, single-cylinder, water-cooled CI engine. The blends of biodiesel and diesel, designated B10, B20, B30, and B40, were 10%, 20%, 30%, and 40%, respectively. Of these, B20 showed the best efficiency-to-emissions ratio. Although it recorded the lowest brake specific fuel consumption of 0.232 kg/kWh, indicating superior fuel …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 339–354 Read article
-
Evaluating the Performance, Emissions, and Combustion Characteristics of CRDI Diesel Engines Using Pine Oil Blends as a Sustainable Fuel Alternative
Abstract: The performance of Common Rail Direct Injectors (CRDI) diesel engines is examined in this study in relation to interacts of pine oil used as an alternative fuel. Finding sustainable fuel solutions is of paramount importance given the growing environmental concerns and the decreasing supply of fossil fuel resources. Pine oil, obtained from resin tapped from pine trunks and processed through steam distillation to separate turpentine from rosin, offers a viable …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 1, 2025 · pp. 24–33 Read article
-
Effect of Nano-Additives on the Emissions, Performance, and Combustion Characteristics of Syzygium cumini (Jamun) Biodiesel Powered DI Engine
Abstract: Renewable and cleaner diesel engine fuel has received a lot of attention recently as a result of the depletion of fossil resources. To address this issue, biodiesel can be a potential substitute for diesel fuel. The finest B20 Jamun blends were combined with three different types of nanoadditives to create Syzygium cumini (Jamun) biodiesel, which was tested in a naturally aspirated diesel engine. Global researchers are starting to develop new …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 77–82 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Combustion Characteristics of Waterlily (Nymphaea lotus Linn.) Briquettes
Abstract: The effect of binder types (bananas, yams, and cassava) and binders proportion on thermal properties of waterlily (Nymphaea lotus Linn.) briquettes were investigated. Peels from bananas, yams, and cassava were collected from agro processing cottage industry. The peels were washed, sun-dried, and ground using a disk mill and Tyler sieves to a particle sizes of 0.50 mm. The waterlily plants were collected from the river using a drag net, sun-dried, …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 12–21 Read article
-
Characterization of Thermochemical Properties and Combustion Behavior In AP/HTPB Polymer Composite Solid Propellant for Enhanced Performance
Abstract: The thermal decomposition of solid propellants containing hydroxyl-terminated polybutadiene (HTPB) binder is a complex process, driven by multiple interacting chemical and physical factors. Solid propellant combustion characteristics are profoundly influenced by the composition of the propellant, the conditions of pressure, the starting temperature, and a range of aero-thermochemical parameters. The paper explores the influence of polymeric structure in the HTPB binder on thermal decomposition characteristics of the AP/HTPB composite propellants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 502–511 Read article
-
Performance, Combustion and Emission analysis of Sunflower oil based Biodiesel using Non-Dominated Sorting Genetic Algorithm-II
Abstract: Biodiesel is used as alternate fuel of I. C. Engines for so many years. It is obtained from various edible and non-edible oils including waste cooking oils through trans-esterification process in the presence of catalyst. The suitable amount of biodiesel mix with commercial diesel can be used to run the compression ignition engines. The optimum combination of engine input parameters is the challenging task as required by the design engineer …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 1, 2023 · pp. 1–6 Read article
-
Enhancing Combustion Efficiency and Emission Reduction in Single Cylinder CI Engines: A Study on Waste Dairy Scum Methyl Ester Biodiesel Blends with Aluminium Oxide Nanoparticles
Abstract: In response to the urgent need for sustainable energy solutions and environmental considerations, this study explored the utilization of waste dairy scum methyl ester biodiesel blended with diesel and enhanced with Al2O3 nanoparticles as an additive. The biodiesel was prepared by blending waste dairy scum methyl ester with diesel and incorporating 100 ppm Al2O3 nanoparticles. Experimental tests were conducted on a single-cylinder diesel engine, comparing neat diesel, B30 biodiesel blends …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 15–28 Read article
-
Injection Pressure Optimization for Non-edible Biodiesel Blends in CRDI Engines: A Comparative Study
Abstract: The growing demand for clean and sustainable energy has increased interest in biodiesel produced from non-edible oil sources. These fuels are renewable, biodegradable, and do not compete with food resources. However, the effective use of biodiesel blends in modern diesel engines requires proper control of fuel injection parameters, particularly injection pressure. In common rail direct injection (CRDI) engines, injection pressure strongly influences spray formation, air–fuel mixing, combustion behaviour, and exhaust …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 2, 2025 · pp. 24–34 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Simulation of Flow Vorticity and Instability Analysis in a Solid Rocket Motor
Abstract: Combustion instability is a major problem in most solid rocket motor (SRM) during its operation. More form of instability is generated due to several factors like coupling of combustion acoustic waves with flow dynamics, grain configuration, combustion chamber design, combustible mixture, etc. This type of flow turbulence is sustained in such system for long durations and leads to failure of the mission. In this paper, an effort has been made …
Published in Journal of Experimental & Applied Mechanics Read article
-
Carbon Capture Technologies: Innovations, Challenges, and Environmental Implication
Abstract: This review work provides a comprehensive overview of carbon capture and storage (CCS) technologies, their status, and future directions. It examines various capture methods, including pre-combustion, post-combustion, oxyfuel combustion, and direct air capture, as well as emerging and hybrid technologies such as metal-organic frameworks, ionic liquids, and microencapsulation. The study discusses the limits of current technologies and attempts to point out innovations needed to ameliorate these challenges. It also explores …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 15, Issue 1, 2025 · pp. 7–18 Read article
-
Micro Steam Turbines for Hybrid Power Source Vehicles
Abstract: The paper describes a new hybrid power system for vehicles consisting in an Internal Combustion Engine (ICE) plus a micro steam turbine (MST) that supplies energy to an electric motor. The result of this hybridization is a reduction in fuel consumption and an improvement in performance efficiency. The micro steam turbine unit uses the released thermal energy from the ICE to generate water vapor flow, which is accelerated in a …
Published in Journal of Automobile Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 9–17 Read article
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Recognition of Engine Parameters for Mahua Biodiesel by Analyzing the Performance Using OFAT Approach
Abstract: The review work deals with the prediction of significant engine input parameters by the use of one factor at a time approach. The technique is a trial of experiments by varying only one engine input parameter and others remain at constant values. The various engine input parameters are found from the literature review. In the current work, six engine input parameters are predicted from the past research. These are blending …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 1, Issue 1, 2023 · pp. 1–10 Read article
-
Therochemical Conversion of Biomass: An Overview
Abstract: A viable way to utilize biomass resources for energy production is through thermochemical conversion processes. This study presents a thorough analysis of the principles, workings, benefits, and drawbacks of thermochemical conversion processes, such as pyrolysis, gasification, and combustion. We examine the various uses of thermochemical conversion in waste management, biofuel synthesis, and energy production. We also go over recent developments, technological breakthroughs, and potential future paths for biomass thermochemistry research. …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 31–42 Read article