Search
35 articles for “Nozzle”
-
Design Conceptualization and Computational Analysis of Cryogenic Engine Nozzle-ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Dual Nozzle 3D Printing of Basalt Fiber–Reinforced Polymer Composites
Abstract: Additive manufacturing or 3Dprinting involves building a three-dimensional object by layering materials based on a computer-created design. Generally, 3D printing using single nozzle process where as strength, quality, wastage, and post reinforcement are drawback of this system. To eliminate and to enhance strength, precise control of fiber reinforcement, good bonding, no need of secondary reinforcement the dual nozzle 3D printing is an emerging additive manufacturing technique. In this process the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 620–630 Read article
-
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
Abstract: In machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain as low as possible. In this study, a dual nozzle Vortex Tube Cooling System (VTCS) that supplies cool compressed CO2 gas is developed to reduce the cutting temperature in Ti-6Al-4V machining. The experiments were conducted at constant cutting and flow parameters during turning at different levels of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 284–291 Read article
-
Effect of Blunt Truncation in an Aerospike Nozzle
Abstract: Aerospike nozzles are gaining attention as a more advanced alternative to conventional bell nozzles, mainly because they can perform efficiently across a wide range of altitude conditions. Unlike traditional converging–diverging nozzles, aerospike designs naturally adjust to changes in ambient pressure, allowing the exhaust flow to expand more effectively. This results in better thrust performance under varying operating conditions, making them a strong candidate for future aerospace propulsion systems. In this …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Evaluation of UAV Spaying System for Droplet Size and Droplet Density Using Rotary Centrifugal Nozzles Boom
Abstract: India is the largest producer of mango (Mangifera indica L.) in the world, ranking first in both area and production. In the Konkan region, mango is the major fruit crop, with 1.10 lakh hectares of productive area dedicated to mango cultivation, resulting in an annual production of 2.6 lakh metric tons. Spraying is the most important operation in orchard crops. The newly developed spraying system was evaluated in the laboratory …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 3, 2024 Read article
-
Advanced Micromachining with Abrasive Jet Machining: Experimental Observations and Model Comparisons
Abstract: Abrasive Jet Machining (AJM), also known as Micro Blast Machining, is a non-traditional machining process that removes material through the erosive action of a high-velocity gas jet carrying fine abrasive particles. This process is particularly effective for machining intricate shapes in hard and brittle materials that are heat-sensitive and prone to chipping. Similar to sandblasting, AJM is widely utilized for tasks such as deburring, rough finishing, and micromachining, especially in …
Published in Journal of Instrumentation Technology & Innovations · Vol. 15, Issue 3, 2025 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Study of a Mist Enhanced Evaporative Cooler
Abstract: Comfort air conditioning through vapour-compression refrigeration is commonly used and is the energy-intensive system. That to split air conditioning system is being employed to create cooling in closed spaces which lag in fresh air supply leading to an increase in carbon dioxide concentration in the cooled space. This is of very much concern towards to maintain indoor air quality. Evaporative Cooling (or Desert Cooling) concept is also a known phenomenon …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 3, 2025 · pp. 1–13 Read article
-
Integration of Smart Sensors and Actuators for a Fully Automated 360° Fire Suppression System
Abstract: In today’s modern era fire safety continues to be a major concern. Therefore, creating a dependable fire safety system is essential. This abstract represents an innovative solution: a 360-degree rotating fire protection system. This system is designed to revolutionise fire suppression by offering comprehensive coverage of enclosed spaces and it also reduces the damage done to surroundings during fire suppression as well as reduces the risk of human life. This …
Published in Journal of Microelectronics and Solid State Devices · Vol. 11, Issue 3, 2024 · pp. 25–32 Read article
-
Comparative Experimental Investigation of Infill Pattern and Infill Density on Fused Deposition Modeling (FDM) Process Characteristics of Polylactic Acid (PLA)
Abstract: Additive manufacturing is the potential and emerging technology widely being used to produce quality products with complicated profiles and customized features. Fused Deposition Modelling (FDM) process, a type of additive manufacturing technology using filament made of thermoplastic which is melted and subsequently extruded through nozzle. The main input process parameters of FDM are wall thickness, infill density, layer height, bed temperature, layer thickness, infill pattern, nozzle temperature etc. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 335–345 Read article
-
Geometrical, Numerical and Materialistic Parameters used for Studying and Reducing Tube-Side Flow Inconsistency in Tube and Shell Heat Exchangers: An Overview
Abstract: A Shell and Tube Heat Exchanger (STHE) exchanges heat between two fluids flowing at different temperatures. More than 60% of the market is occupied by STHE’s out of all the different kinds of heat exchangers. Maldistribution is the uneven fluid flow distribution in the tubes of the STHE. The aim of this study is to provide a detailed review on the various methods used by researchers for reducing the maldistribution …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 603–621 Read article
-
Chemical Reactor Design and Analysis: A Review
Abstract: Chemical reactors play a critical role in industries such as oil and gas, chemical processing, and power generation, where they operate under extreme pressure and handle highly toxic, compressible fluids. The growing need for alternative energy sources has led to an increased demand for vessels capable of withstanding high pressure and temperature, especially in the chemical and petroleum industries. Recent innovations in chemical reactor technology have concentrated on creating new …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 49–59 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Additive Manufacturing of Rocket Propulsion System: A Review
Abstract: In recent years plenty of research is going on to produce effective manufacturing techniques which can produce complex unique designs with reduced cost and lead time for aerospace applications. In this aspect, Additive manufacturing is getting a wide range of popularity in the aerospace manufacturing domain due to its vast applications and advantages. In terms of geometric flexibility and processing time, additive manufacturing outperforms conventional manufacturing processes. Additive manufacturing has …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Failure Analyses of 16 mm Thick SA 516 GR 70 Auto Clave
Abstract: With the acceleration of global industrialization, there is a demand for high-or low-pressure storage of liquids or gases. Because of the complicated operating conditions that will inevitably encounter a possible hazard, pressure vessel design is a critical responsibility. Previous failure studies have revealed that the presence of local loads and discontinuities increases pressure vessel fracture. As a result, a detailed examination of pressure vessel steel from the standpoint of fracture …
Published in Trends in Mechanical Engineering & Technology Read article
-
Parametric Study of Fused Deposition Modelling Process During Fabrication of Acrylonitrile Butadiene Styrene (ABS) Based Injection Molding Die
Abstract: The purpose of this study is to dictate an optimum process parameter during the fabrication of additively manufactured acrylonitrile butadiene styrene (ABS) based injection mold using fused deposition modelling methodology based additive manufacturing process and to assess the quality of the infection mold by analyzing the surface roughness of the injection mold, and the time taken in the manufacturing of the mold. The ABS PRO+ filament is used in manufacturing …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 Read article
-
Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array
Abstract: Abstract Wire Arc Additive Manufacturing (WAAM) has gained significant attention in recent years as a promising technique for producing complex metallic components. This study focuses on the processing of Cu90Ni10 alloy using WAAM and employs an L9 orthogonal array to optimize the mechanical properties of the resulting components. Cu90Ni10 alloy is known for its excellent corrosion resistance and electrical conductivity, making it a critical material in various industries, including aerospace …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 292–301 Read article
-
Optimal Abrasive Jet Machining Parameters for Glass Fiber Reinforced Plastics
Abstract: Abrasive jet machining (AJM) is a best choice for processing of glass fiber reinforced plastics (GFRP). Inherent to the nonlinear behavior of performance characteristics during repeated experiments are inevitable variations, attributed to measurement errors and unknown influencing input variables. This study employs the Taguchi method with an orthogonal array to systematically identify optimal input variables through a limited number of experiments. The paper introduces a direct and reliable Taguchi-based multi-objective …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 247–255 Read article
-
TOPSIS-Driven Optimization of FFF Process Parameters for Mechanical Strength Enhancement
Abstract: In this study, the application of the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method for optimizing Fused Filament Fabrication (FFF) process parameters to enhance the tensile and flexural strength of Polylactic Acid (PLA) material-based 3D printed components is explored. This investigation delves into the intricate relationship between key parameters, such as layer height, print speed, infill density, print temperature, and nozzle diameter, and their impact …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 246–255 Read article