Search
58 articles for “Improvement of the Coefficient of Performance”
-
Cogeneration System in Concentrated Photovoltaic Panels
Abstract: This study analyses the behavior of hybrid systems composed of photovoltaic panels (PV) and phase-change materials (PCM) under solar concentration conditions, aiming to generate electric and thermal energy in water simultaneously (cogeneration). This work looks for system performance improvement while increasing the generated power and energy by the PV panel and the thermal system in unison. The study shows the increase in power and energy delivered by the prototype compared …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–14 Read article
-
Micro Steam Turbines for Hybrid Power Source Vehicles
Abstract: The paper describes a new hybrid power system for vehicles consisting in an Internal Combustion Engine (ICE) plus a micro steam turbine (MST) that supplies energy to an electric motor. The result of this hybridization is a reduction in fuel consumption and an improvement in performance efficiency. The micro steam turbine unit uses the released thermal energy from the ICE to generate water vapor flow, which is accelerated in a …
Published in Journal of Automobile Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 9–17 Read article
-
Sustainable Innovations in Vapor Compression Systems: A Review of Heat Recovery and Environmental Performance
Abstract: Vapor compression refrigeration systems are widely used in residential, commercial, and industrial sectors, contributing significantly to global energy consumption and greenhouse gas emissions. This review explores sustainable innovations in vapor compression systems, focusing on waste heat recovery techniques and their impact on environmental performance. Key advancements include the integration of heat exchangers, ejector systems, and hybrid configurations that enhance energy efficiency while reducing refrigerant load and emissions. With a focus …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 16–21 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Improved Cooling Effectiveness in Radiators and Heat Exchangers with Nanofluid-Based Technology
Abstract: This study discusses how the process of heat transfer in radiators and heat exchangers can be improved using nanofluids and analysis of computational fluid dynamics. These nanofluids comprise Al₂O₃ and ZnO dispersed in water-based ethylene glycol solutions, and graphene oxide dispersed in water-based solutions, and performance evaluation was done for the range of flow rates 180–420 l/h. And a 3D CAD model was created using the ANSYS Workbench. It was …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 31–62 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Design and Performance Evaluation of A Refrigeration System Utilizing The Peltier Cooling Effect
Abstract: A domestic refrigerator with 5star rating and having capacity 180 Liters consumes 265 units per year. In India average cost of electricity consumption per unit for domestic usage up to 100 units is Rs 5.31per Unit and beyond 300 units it is Rs.8.95 and for industrial it may go beyond Rs 10.45/kWh. This scenario demands for alternative cooling technology that can replace totally VCR (vapour compression refrigeration) system. This thesis …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 1, 2026 · pp. 34–47 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Optimization of Sustainable Electrochemical Machining Parameters for Polymer based Materials Using AHP Integrated TOPSIS Method
Abstract: The current paper describes the use of the AHP-TOPSIS method to optimize process parameters in sustainable electrochemical machining of polymer composites. Combine lightweight polymer matrices with reinforcing particles or fibers such as TiB₂, SiC, or Al₂O₃, offering high strength-to-weight ratio, corrosion resistance, and design flexibility, making them ideal for aerospace and automotive applications. Non-conductive and heterogeneous nature poses challenges during electrochemical machining, as it affects current distribution and material removal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1048–1059 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Management of Lead–Acid Battery System in Electric Vehicles
Abstract: To determine the lead-acid battery's state of charge in electric vehicles, a novel coulometric method is presented in this article. There are two major problems with the main state of charge algorithms that are currently in use: one defines the state of charge incorrectly for applications involving electric vehicles, and the other uses the accumulator's static performance sub-optimally to estimate its state under dynamic stresses. To address these two shortcomings, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 1, 2024 · pp. 18–27 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Analysis of the Output Power in Offshore Bladeless Vibrational Wind Turbines
Abstract: This work focuses on studying and analyzing the power generation in offshore bladeless vibrational wind turbines. In previous work, we developed detailed research about the vibrational wind turbine design and configuration; in this new work, we analyze the energy supply from this type of turbine to achieve a better understanding of the behavior and potential of bladeless vibrational wind turbines (BVWT) as an additional power source in offshore wind farms. …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 3, 2024 · pp. 12–23 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems
Abstract: Because of their dependable operation and effectiveness, vapor compression refrigeration systems, or vapor compression refrigeration (VCRS), have become popular in commercial, industrial, and residential settings. However, under different thermal loads, classic vapor compression refrigeration (VCR) systems may perform less well in that they are usually built for steady-state conditions and run at consistent speeds. In order to improve a load-responsive VCR system’s flexibility, energy efficiency, and response to changing cooling …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 32–37 Read article