All articles
53 articles
-
Carbon-Coated Te-Doped Bi₂Se₃ as a Topological Quantum Anode Material for Sodium-Ion Batteries
Abstract: Sodium-ion batteries (SIBs) are increasingly investigated as cost-effective alternatives to lithium-ion systems for large-scale energy storage; however, the development of stable and conductive anode materials remains a major challenge. In this work, tellurium-doped bismuth selenide (Te-doped Bi₂Se₃) was synthesized and further modified with Super P conductive carbon to improve its sodium-storage behavior. The phase formation and structural retention of the active material were examined using X-ray diffraction, while elemental mapping …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 55–61 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Experimental and Simulation Study on Reduction Kinetics of Magnetite Ore by using Hydrogen
Abstract: In the present work, magnetite ore fines pellets were prepared for a study of reduction kinetics using hydrogen gas. In the present work, various parameters are investigated to assess their influence on reduction kinetics with respect to hydrogen utilisation. The different input variables influence the process, yielding the reduction fraction. The effect of temperature on reduction kinetics with hydrogen flow rate was explored for the optimum value of these parameters. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Sustainable Manufacturing: The Role of Additive Technologies in Waste Reduction
Abstract: Additive manufacturing (AM) is transforming modern manufacturing by significantly reducing material waste while enabling highly efficient production processes. Unlike conventional subtractive manufacturing methods—such as cutting, drilling, and milling—which remove excess material and generate large volumes of scrap, AM constructs objects layer by layer, depositing material only where required. This precise material placement minimizes waste generation and supports resource-efficient production, making AM a critical technology for sustainable industrial development. Beyond waste …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 62–70 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Analysis of Machine Learning in Metal Processing: A Novel Prospect
Abstract: Metal is processed by a wide range of procedures, from forming and casting to machining and riveting. Metal processing is a crucial part of modern manufacturing. The application of machine learning (ML) is driving a significant change in the sector, which has historically depended on empirical knowledge and trial-and-error techniques. Increased production, improved product quality, and resource optimization are expected outcomes of this action. This study aims to explore the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 40–51 Read article
-
Monitoring The Hydrocarbon Utilizing Bacteria in Crude Oil Remediation Using Bio-Stimulant of Mint Leaf (Mentha Piperita)
Abstract: Conceptual monitoring of hydrocarbon utilization bacteria on crude oil remediation using bio-stimulant of mint leaf (Mentha piperita) was investigated. The bio-stimulant nutrient was determined by considering the available nitrogen, phosphorus, potassium, and hydrocarbon utilizing bacteria presence in both room and sun-dried samples of the remediant used. The mint leaf (Mentha piperita) was processed to obtain the powder form (nano particle size) of the bio-stimulant and the microbes isolated and identified …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 34–39 Read article
-
Surfactant-Mediated Synthesis and Stabilization of Colloidal Nanoparticles in Aqueous Media: A Preliminary Study on Controlling Parameters
Abstract: Surfactants dissolved in water possess a distinctive tendency to accumulate at surfaces or interfaces, a process that involves the migration of surfactant molecules from the bulk liquid phase to the interfacial region. This adsorption tendency of surfactants is being exploited in stabilization of the Nanoparticles (NPs) synthesized through colloidal chemistry routes. In present research, preliminary studies on controlling parameters involving various surfactants has been carried out to standardized the chemical …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 25–35 Read article
-
Comparative Analysis of Natural and Synthetic Fibre-Reinforced Composites: Mechanical Properties, Processing, and Sustainability Considerations
Abstract: The development of fibre-reinforced composites has significantly advanced engineering applications due to their excellent strength-to-weight ratio, corrosion resistance, and versatility. Synthetic fibres such as glass and carbon provide superior mechanical performance, but their production is energy-intensive and environmentally harmful. Natural fibres, including jute, flax, banana, and hemp, offer biodegradability, lower cost, and sustainability benefits, though they often fall short in strength and durability. Hybrid composites frequently demonstrate improved performance by …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 77–95 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Carbon-Based Supercapacitors Evolutionizing EVs
Abstract: The relentless pursuit of efficiency in transportation, particularly in electric and hybrid vehicles, hinges on sophisticated energy management systems. Regenerative braking, a technology that offers a significant opportunity for improving fuel economy and extending battery life. However, the effectiveness of regenerative braking is often hampered by limitations in energy storage systems. Traditional batteries, while excellent for sustained energy delivery, struggle with the rapid charge and discharge rates required by aggressive …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 66–76 Read article
-
Innovative Design and Implementation of PCD-Based Drawing Dies and Tungsten Carbide Molds for Automotive Fastener Manufacturing
Abstract: This study presents an integrated engineering investigation into the design, optimization, and implementation of advanced tungsten carbide and polycrystalline diamond (PCD) tooling technologies within the cold forging and wire drawing processes at Koobesh Kavir Semnan Company, one of Iran’s leading automotive fastener manufacturers. By combining powder metallurgy principles, material flow simulation, and experimental validation, this research introduces a technological advancement that improves productivity, tool longevity, and cost-efficiency in industrial production. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 16–26 Read article
-
Design and Implementation of 256-bit Vedic Multiplier on Reconfigurable Platform
Abstract: Multiplication is a fundamental arithmetic operation in digital signal processing and embedded systems. Traditional multiplier architectures often suffer from increased latency and resource utilization when scaled to higher bit widths. Vedic Mathematics, an ancient Indian technique, offers a novel and efficient alternative. This paper presents the design and implementation of a 256-bit Vedic multiplier using the Urdhva Tiryakbhyam Sutra on a reconfigurable hardware platform, specifically FPGA. The proposed architecture decomposes …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 56–65 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Short Review: The Expanding Role of Shape Memory Alloys in Technology and Medicine
Abstract: Shape Memory Alloys (SMAs) are a unique class of smart materials that can recover their original shape when exposed to specific stimuli, such as temperature or magnetic fields. This exceptional property, attributed to the martensitic phase transformation, has garnered significant interest in various industries. SMAs exhibit remarkable characteristics such as pseudoelasticity, high corrosion resistance, excellent biocompatibility, and superior fatigue strength, making them ideal for applications in biomedical, aerospace, automotive, and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 35–44 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Heat Transfer Analysis Between Two Aluminium Parallel Plates With Natural Convection
Abstract: As a type of energy, heat can be transferred from heated systems using the natural convection heat transfer method, which has several uses in different industries. Natural convection method of heat conveyance is suitable in many cases due to absent of any external sources like fan. The transfer of this kind of energy can be listed as electrical and electronics equipment, nuclear reactors, domestic convection, dry cooling towers, thermo siphons, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 26–34 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article