All articles
1751 articles
-
A Critical Review on Semi-solid and Solid Lubricants for Industrial Applications
Abstract: Friction materials are very important for the safe moving of automobiles and the safety of people. As the pad slides against its match, the moving energy is turned into heat by the friction. As the vehicle's speed is lost as heat in the pads and rotors, the friction at the contact slows it down. Lubricants are compounds that are applied to moving parts to reduce friction and wear. Used primarily …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 105–114 Read article
-
Taguchi Design for Optimization of Reinforcement at Toe area of Carbon Fiber Foot Plate
Abstract: This paper uses the Taguchi method to design experiments to determine the effect of various factors, such as fiber orientation, fiber type, and number of layers, on the reinforcement at the toe area. The experiments are Taguchi method, which allows for identifying the optimal combination of factors that minimize the carried out using a combination of computer simulations and physical tests. The results are analyzed using the variability in the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 115–121 Read article
-
Design and Development of Ankle Foot Orthosis for Foot Amputated Person by Using Carbon Fibre
Abstract: Ankle and foot orthotics play a pivotal role in the rehabilitation of individuals who have suffered a stroke, aiding in the restoration of their gait and overall mobility. However, optimizing the effectiveness of these orthoses requires a personalized approach that takes into account each patient's unique biomechanical characteristics. This study delves into the innovative use of carbon fiber combined with cost-effective 3-D printing technology to craft custom foot plate orthoses …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 115–121 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
An Evaluation of Versatile CNC Machines for Tabletop Applications
Abstract: The tabletop CNC provides a comprehensive analysis of computer numerical control (CNC) machines tailored for tabletop use. In today's rapidly evolving manufacturing landscape, compact and adaptable CNC systems have gained prominence due to their potential to revolutionize small-scale production and prototyping. This research examines a range of versatile CNC machines, assessing their capabilities, precision, ease of use, and suitability for various tabletop applications. By exploring key factors such as size, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 88–104 Read article
-
Effect of Fillet Radius on Bending Stress in Helical Gear using FEA
Abstract: A well-optimized change in root fillet radius could greatly benefit helical gear operation by providing a smoother transmission with less impact and noise. The fillet area of the gear root is an area of extensive bending stress concentration. An increase in fillet radius for helical gears is considered to minimise the bending stress at the gear tooth's base. This paper develops appropriate models of various gear tooth profiles of the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 129–136 Read article
-
Prediction and Comparative Analysis of Thermal Conductivity of Jatropha Oil-based Hybrid Nanofluid by Multivariable Regression and ANN
Abstract: In the present study, a multivariable regression (MR) and artificial neural network (ANN) method was used to predict the thermal conductivity of Jatropha oil-based ZnO-Ag hybrid nanofluid. Firstly, the ZnO-Ag hybrid nanoparticles were synthesized and mixed in the jatropha oil to prepare various nanofluids at different volume concentrations (F) ranging from 0.05 to 0.20%. The stability and thermal conductivity of the prepared nanofluids were investigated. Wide ranges of temperature and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 32–39 Read article
-
Topology Optimization of Press Tools for Additive Manufacturing: Reducing Manufacturing Time
Abstract: This research paper presents a topology optimization study of a press tool consisting of a punch and a die, with the aim of optimizing the press tool topology to reduce material usage, and manufacturing time while maintaining necessary strength. The tools will be manufactured using additive manufacturing technology with Polylactic Acid (PLA) material. The Additive Manufacturing method can be used to make prototypes of press tools in the development stages. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 40–56 Read article
-
Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations
Abstract: In this study, the finite element method is used to quantitatively explore transient free convection in porous cavities in order to understand the flow characteristics and heat conduction processes in the square cavities. In comparison to an uniform temperature gradient, the left wall is swiftly heated and the right wall is allowed to cool to a specific temperature. The horizontal walls are insulated on both sides. Dimensionless representations of the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 1–10 Read article
-
Review of Post-consumer Plastics and Pyrolysis Technology
Abstract: In both industrial and residential products, synthetic polymers are widely used. Since synthetic polymers are made from fossil fuels, they cannot decompose. disposal of plastic solid waste (PSW) has threatened the ecosystem seriously. In this article, we examine the various post-consumer PSW thermo-chemical recycling techniques. A method that has shown promise for converting PSW into valuable hydrocarbon compounds is pyrolysis. PSW has been broken down through thermal decomposition, however, value-added …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 57–62 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article
-
Liquid-Cooled Battery Thermal Management System: A Numerical Investigation of Effect of Coolant Path and Flow Rate Optimization
Abstract: Battery thermal management system (BTMS) is crucial for ensuring the safety and performance of battery packs in electric vehicles. Liquid cooling is one of the most effective methods for BTMS, but the choice of coolant, fluid path and its flow rate can affect the heat transfer efficiency and the pressure drop. In this paper, a numerical simulation of a liquid-cooled BTMS using three designs with water as a coolant has …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 11–18 Read article
-
Numerical Analysis and Comparison of Various Cross Sections of Heat Pipes in Heat Exchanger
Abstract: The present work describes about numerical analysis of heat pipe with different cross sections such as L-shape, U-shape, wave and spring configurations. The effect of various configurations of heat pipe plate exchanger are examined by considering temperatures, velocities, pressure depressions. The numerical values of Reynolds number, Nusselt number, heat transfer were calculated at different velocities. The outcome of numerical analysis found that it influences fluid flow and pressure depression. Hence, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 74–81 Read article
-
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy
Abstract: Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to examine the effects on the corrosion resistance of low alloy CrMoV steel. In order to eliminate residual stresses and boost wear resistance in steels and other metal alloys, cryogenic heat treatment (CHT) employs cryogenic temperatures (i.e., below - 190°C) to treat work parts. Cryogenic treatment is …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 63–73 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Dispersion Analysis of TE Modes in 1D Magnetized Ferrite Photonic Crystals for Tunable and Switchable Band Gap Filtering Device Applications under Transverse Magnetization Configuration
Abstract: The article comprehensively explores the dispersion characteristics exhibited by TE modes within one-dimensional magnetized ferrite photonic crystals, particularly under the influence of transverse magnetization. We employed the rigorous transfer matrix method, a powerful tool for theoretical investigation, calculation, and behavior analysis of such intricate systems. Our research delves into the structural parameters that govern the behavior of these ferrite photonic crystals, explicitly focusing on the incident parallel wave vector (β) …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 60–68 Read article
-
Kaniadakis Holographic Dark Energy by Using Hybrid Scale Factor
Abstract: We carry out the work on Kaniadakis holographic dark energy KHDE with hybrid expansion law by taking the scale factor containing both exponent and exponential form. Therby revealing the present state of accelerating and expanding universe in the flat Friedmann-Robertson-Walber universe. The deceleration parameter q portrays whether he universe is decelerating or accererating. q greater than zero suggests the universe is slowing down or getting decelerated and q less than …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 30–38 Read article
-
Breakup Fusion of 18O with 144Sm
Abstract: Excitation function measurements have been done for the evaporation residues populating in the system 18O+144Sm. For this purpose, the stacked foil activation technique has been used subsequently accompanied by offline γ-ray spectrometry. The analysis of the experimental cross section of three evaporation residues 158Tm(p3n), 157Tm(p4n), and 155Ho(ap2n) has been done in the light of theoretical code PACE-4. Current findings demonstrate that the experimental cross sections of evaporation residues formed via …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 53–59 Read article
-
Evaluation of Patient-Specific Quality Assurance for RapidArc Treatment Delivery Using Dose Volume Histogram
Abstract: This study aims to evaluate the application of dose volume histogram (DVH) metrics within the patient-specific quality assurance (PSQA) protocol in various sites for RapidArc treatment delivery. Forty patients were included in this study, of which twenty each Head and Neck (H&N) and Pelvis Rapid Arc plans were evaluated. Octavius 4D 1500 detector array with vented parallel plate ion chambers was used for this study, which reconstruct the pre-treatment measured …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 14–22 Read article