All articles
1751 articles
-
pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings
Abstract: Metallic corrosion under adverse marine and industrial conditions imposes gigantic financial burdens and risks worldwide. Conventional waterproofing waterborne epoxy has passive barrier protection, but is also inherently microporous, lacking intrinsic repair ability against mechanical damage and thus rapidly decays. This is a critical gap that this work tries to bridge by designing a new pH-responsive hybrid polymer nanocomposite by using polyethyleneimine-tannic acid-cerium functionalized boron nitrate nanosheets with chitosan-capped mesoporous silica …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 201–213 Read article
-
Natural Frequency Analysis of Polymer Composites
Abstract: Polymer composite materials are increasingly utilized in vibration-sensitive engineering applications due to their high strength-to-weight ratio, design flexibility, and tailorable dynamic properties. Among these properties, natural frequency plays a crucial role in determining structural stability, resonance avoidance, and dynamic performance. This review presents a comprehensive synthesis of recent research on the natural frequency characteristics of polymer composite structures, with emphasis on material properties, structural configurations, boundary conditions, damage effects, environmental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 541–553 Read article
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
Machine Learning Optimization for VARTM Carbon Polymer Laminates
Abstract: Vacuum-assisted resin transfer moulding (VARTM) is a key low-cost, out-of-autoclave process for manufacturing large-scale carbon-fibre reinforced polymer (CFRP) laminates crucial to aerospace wings, wind-turbine blades, marine hulls, and automotive structures. Unpredictable resin flow often leads to voids, dry spots, and race-tracking defects, resulting in 27.9% scrap rates and lengthy, costly trial-and-error design cycles. Although surrogate models provide rapid impregnation predictions for simple flat-plate geometries, vision-based monitoring is limited to idealized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–245 Read article
-
Structure Property Correlation of Polymer Dielectrics Using Electrical Response Data
Abstract: Polymer dielectrics are foundational to insulation, capacitors, embedded passives, and flexible electronics, where performance is governed by the frequency-dependent electrical response rather than a single dielectric constant. This study presents a spectroscopy-aware structure–property correlation framework that transforms dielectric response data into physically interpretable spectral fingerprints and learns mappings from polymer descriptors to these fingerprints for prediction and interpretation. Broadband spectra are standardized on a log-frequency grid and parameterized using relaxation-informed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 315–324 Read article
-
Integrated DIPlib and OpenCV Framework for Precise Geometric Characterisation of Woven Fibre-Reinforced Polymer Composites
Abstract: The mechanical properties of woven fibre-reinforced polymer (FRP) composites stem entirely from the geometrical regularity inherent in their reinforcement structure. Changes in the size of the unit cell, fibre tow separation, weave angle, and fibre tow spacing will have an immediate effect on the stiffness and shear modulus of the material. In this paper, a combined machine vision system that incorporates both the OpenCV and DIPlib libraries is proposed for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 158–171 Read article
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Mathematical Modelling and Experimental Analysis of a 3D Printed PLA UAV Propeller using NACA 4412 Airfoil
Abstract: The usage of unmanned aerial vehicles (UAVs) has grown significantly because they are cost-effective and easy to availability for many applications. However, researchers have focused on the designing for various UAV propeller/rotors geometries, including their aerodynamic performance and structural examination. An elegant, designed propeller can enhance the UAV's endurance limit and its reliability. This research focuses on designing of UAV propeller and its fabrication using Polylactic acid (PLA) material using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 825–832 Read article
-
Noise and Vibration Reduction Using Sustainable Polymer Nanocomposite Materials: A Review
Abstract: Noise pollution and structural vibration represent critical challenges in modern engineering systems, affecting human health, operational efficiency, and equipment durability. This review examines the application of sustainable polymer nanocomposite materials for simultaneous noise and vibration reduction across diverse engineering domains. The fundamental relationship between structural vibration and noise generation is established, followed by a comprehensive analysis of sound absorption and damping mechanisms in nanoparticle-reinforced polymer systems. Multi-walled carbon nanotubes (MWCNTs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 785–798 Read article
-
Development of Neuromorphic Polymer Composites Using IoT Sensing and Brain-Inspired Learning Algorithms
Abstract: This research aims to develop neuromorphic polymer composites by combining conductive sensing materials, IoT-based sensing data collection and brain-inspired learning models for adaptive response. Hybrid conductive polymer composites were developed by adding carbon nanofibers and graphene Nano platelets to a thermoplastic polymer. IoT sensors (strain, temperature) were employed to collect real-time sensing data that was combined with environmental data. A material-aware neuromorphic learning algorithm was created with event-driven spike coding …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 755–784 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Computational Modeling of Polymer Semiconductors for Electronic Applications
Abstract: Polymer semiconductors have become important materials in modern electronic applications because they combine semiconducting behavior with mechanical flexibility, low-cost processing, and tunable molecular structure. Their growing use in organic field-effect transistors, organic photovoltaics, organic light-emitting diodes, and flexible sensing devices has increased the need for accurate computational approaches that can predict material properties and device performance before experimental fabrication. This paper reviews the major computational modeling techniques used for polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 132–146 Read article
-
IoT-Enabled Self-Monitoring Polymer Composites for Solar Facade Systems with Cloud-Based Thermal Analytics
Abstract: The increasing demand for intelligent and energy-efficient building systems has hastened the production of smart solar facade systems. This paper presents an IoT-based self-monitoring polymer composite system, which includes thermal analytics running on the cloud to provide real-time assessments of the performance of the facade. The artificial composite panel has sensing capability built in which the material is able to measure both surface and internal thermal behavior simultaneously in dynamic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 657–681 Read article
-
Recycling and Reinforcement of Retired EV Battery Materials in Polymer Composites for Sustainable Engineering Applications
Abstract: The rapid proliferation of electric vehicles (EVs) has led to a substantial increase in lithium-ion battery waste, necessitating sustainable strategies for material recovery and reuse. This review explores the valorization of retired Electrical Vehicle batteries within polymer and composite systems, highlighting second-life applications as a promising pathway toward circular material utilization. Batteries retaining 70–80% of their original capacity remain suitable for extended use; however, beyond conventional energy storage, their constituent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 362–371 Read article
-
Polymer Encapsulants for Photovoltaic Modules: Electrical Insulation Performance and Long-Term Durability under Accelerated UV Exposure
Abstract: Influence on the reliability and service life of PV modules is a major issue, which is influenced by the encapsulant degradation in long-term exposure to the sun's ultraviolet (UV) radiation. A systematic accelerated UV aging study of Ethylene Vinyl Acetate (EVA), Polyolefin Elastomer (POE), and Polyvinyl Butyral (PVB) films under IEC 61215-2:2021 specified test chamber conditions of Q-UV is conducted. The material properties were tested at various exposure intervals including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 384–408 Read article
-
A Low-Cost Multi-Sensor IoT System for Real-Time Segregation of Polymer Waste
Abstract: Segregation of solid waste is a critical aspect of waste management, especially in settings where technical and financial constraints limit the adoption of sophisticated technologies. The proposed low cost, sensor-driven smart waste sorting system combines a variety of sensing technologies with an integrated decision-making system. The system employs an inductive sensor, moisture sensor and capacitive sensor to measure the physical properties of waste items, allowing segregation into metal, wet and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–`107 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article