All articles
1751 articles
-
MHD-Assisted Flow Regulation of Viscoelastic Polymer Fluids for Industrial Cooling and Composite Fabrication with Isotherml Plates
Abstract: This study investigates the magnetohydrodynamic (MHD) regulation of viscoelastic polymer fluid flow over a permeable plate, emphasizing its relevance to industrial cooling and composite fabrication. An incompressible, electrically conducting viscoelastic fluid is analyzed under a transverse magnetic field with Hall and ion-slip effects to capture electromagnetic alterations in polymer transport. The governing non-dimensional equations for momentum, temperature, and concentration are solved analytically using the perturbation method. The results show that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 851–866 Read article
-
Polymer Nanocomposites As Emerging Platforms in Pharmaceutical Nanotechnology
Abstract: Nanotechnology allows the handling of materials in the 1–100 nm range, where distinct physicochemical phenomena, including quantum effects and higher surface-to-volume ratio, enable disruptive uses in pharmaceuticals and biomedicine. Significant challenges in solubility, stability and targeted biodistribution of therapeutics can be overcome by incorporating nanostructured polymers and polymer-based composites into drug delivery systems. PLGA nanoparticle and other nanocarriers, such as PLGA micelles, dendrimers, and hydrogels, have revealed promising effects on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 268–278 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Magnetic Metal–Polymer Composites with Ferromagnetic Particle Networks for EMI Shielding in Flexible Electronics
Abstract: The rapid expansion of flexible and wearable electronic systems has intensified the demand for lightweight, mechanically compliant materials capable of effective electromagnetic interference (EMI) shielding. In this study, magnetic metal–polymer composites with magnetically aligned ferromagnetic particle networks were developed and systematically investigated for EMI shielding in flexible electronics. Thermoplastic polyurethane (TPU) was employed as an elastomeric polymer matrix due to its excellent flexibility, dielectric characteristics, and compatibility with particulate fillers. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 25–39 Read article
-
Digital Twin-Driven Optimization of Dynamic Covalent Polymer Networks under Real-Time IoT Monitoring
Abstract: The dynamic covalent polymer networks (DCPNs) has the highest allurement because of the reversibility of all of the chemicals and repetitive. The process of convalescence is delayed, the sense of source betrayal and acting relations is too strong. This transport to our material situation is an ever-refrigerated digital twin in this painting which was developed through repetition produced by constant synchronism sensors of the IoT that is constantly refined by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 137–157 Read article
-
ML-Enhanced Self-Healing Fiber-Reinforced Polymer Composites with Embedded IoT Sensors for Damage Prediction
Abstract: Fiber-reinforced polymer (FRP) composites are widely used in aerospace and structural systems; nevertheless, the potential for microcracking and fatigue-induced performance degradation remains an obstacle with respect to improved service life. Traditional self-healing methods, while performing well on a chemical level, often lack real-time diagnostic awareness and adaptive control. To circumvent this, we developed a machine-learning augmented self-healing FRP composite, in which a DCPD–Grubbs catalytic matrix was combined with IoT sensor …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 188–208 Read article
-
Experimental Analysis of Glass Fiber Composite on Low Velocity Impacts
Abstract: This research specifically deals with determining the retained tensile strength after loading Glass Fiber Reinforced Polymer (GFRP) composites following low-velocity impact. The purpose is to determine the degree to which these impacts affect the structural performance and mechanical integrity of GFRP materials. Experimental tests were conducted on glass fiber composite specimens in order to observe variation in tensile strength upon impact. The results indicated significant tensile strength reduction in impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 789–796 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article
-
The Impact of Nanotechnology in Transforming Neuro-oncology - A Comprehensive Review
Abstract: The treatment of central nervous system (CNS) tumours, including aggressive malignancies like glioblastoma, faces significant challenges. The blood–brain barrier (BBB) blocks nearly 98% of small-molecule drugs from achieving therapeutic levels in the brain, and the heterogeneity of these tumours frequently contributes to treatment resistance and poor outcomes. Traditional approaches, including chemotherapy and radiotherapy, are hindered by systemic toxicity and inadequate drug penetration. Nanotechnology provides a promising alternative, as nanoparticles (NPs) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 627–637 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Comparative Study on Oro Dispersible Tablets of Candesartan Cilexetil Formulated with Natural and Synthetic Disintegrants
Abstract: Candesartan cilexetil, a BCS class II drug with low aqueous solubility and poor bioavailability (15%), poses challenges for oral delivery. To address this limitation, the present study focuses on polymer-based inclusion complexation and composite formulation strategies to enhance solubility and dissolution behavior. The drug was incorporated into β-cyclodextrin (β-CD), a cyclic oligosaccharide polymer, by the kneading method in different drug-to-carrier ratios. Among these, the 1:1 molar ratio complex exhibited the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 687–695 Read article
-
Polymeric Ion-Exchange Complexes of Carbomer for Taste Masking and Enhanced Drug Bioavailability: A Physicochemical and In Vivo Study
Abstract: Famotidine (FAM) was recognized as a crystalline powder that varies in color from white to pale yellow and possesses an extremely bitter flavor. This study aimed to conceal the unpleasant flavor of FAM through employing unconventional ion-exchange resins sourced from Carbomer polymer Evaluation (Carbopol 974P). We used FTIR, DSC, and XRD to look at the drug-resin combination in its hard form to learn more about its physical and chemical properties. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 727–740 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Revolutionizing the Delivery and Efficacy of Nutraceuticals
Abstract: The global nutraceutical market is on a remarkable growth trajectory, fueled by a growing public focus on preventive health and expected to surpass USD 900 billion by 2030. However, a major roadblock stands in the way of many promising bioactive compounds—like resveratrol, curcumin, and omega-3s—reaching their full potential: their poor absorption by our bodies. Issues like low solubility in water, instability in the gut, and rapid metabolism lead to notoriously …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 638–647 Read article
-
Design and Ballistic Performance Assessment of Pattern-Optimized Lightweight Composite Armor Using ANSYS Explicit Dynamic and AUTODYN
Abstract: This study investigates the ballistic performance of lightweight composite armor panels designed to defeat 9 mm full-metal-jacket (FMJ) threats using high-fidelity numerical simulations. Four different composite materials were arranged into panels of identical overall dimensions; only the internal segment pattern was varied to explore geometric resistance effects while keeping mass and material type controlled. Ballistic impact simulations were performed using ANSYS Explicit Dynamics and AUTODYN to capture high-strain-rate behavior, local …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 174–190 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Polymers In Low-Resource Biomedical Innovation: Maker Labs, DIY Devices and Ethics
Abstract: The low-cost biomedical devices have been prototyped and sometimes put into practice by maker laboratories and community "DIY" (Do-It-Yourself maker) innovators due to the fast-growing availability of polymer-based fabrication (desktop 3D printing, laser cutting, and simple molding). Nowadays, polymers such as PLA, PETG, TPU, and PEEK are used in a wide range of applications, including surgical guides and anatomical models, as well as assistive technology and diagnostic housings. Such innovations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 108–119 Read article
-
A Generative AI Paradigm for a Global Crisis: Redesigning the Sanitary Pad Polymer Lifecycle for Environmental and Public Health in India
Abstract: The sale of disposable sanitary pads, most of which contain non-biodegradable polymers, especially polyethylene (PE), polypropylene (PP) and superabsorbent polyacrylates (SAPs), has led to a souring environmental and population health crisis, especially in India. A linear economic approach of take-make-dispose has resulted in the exponential growth of polymer waste that fully blocks drains, leads to microplastic pollution, and overloads insufficient waste management facilities. Traditional polymers are designed to be permanent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1570–1591 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article